or is it pantai timur malaysia? pahang, terengganu or kelantan, perhaps? maybe we could get in touch. i would really appreciate your help in teaching me how to overclock this chip if it's not such a big deal. i also got me an abit mobo. just got past flashing bios to recognize it as the le-1620 proc
what type of abit mobo you used bro? can give full spec of your rig?
wow, i'm speechless nonetheless. i'm just a newbie, dear tictac. really need to know the requirements needed, adjusting to our country's rather hot climate plus my build will be at room temperature, no air-cond, sorry.hehe just poor bloke trying to mix-in with you guyz. i'm situated in kajang.
just make sure htlink speed arround 1ghz. use ddr400 memory ratio 1st. push up ht ref slowly. 5mhz intreval. test with superpi 1m then 3dmark. if stable push somemore. until default vcore bottleneck check temperature. if good push up vcore.
Proc- AMD Athlon 64 AM2 LE-1620 (2.4GHZ/1152KB L2 Cache/940Pin)
Cooler for AM2 CPU- Cooler Master Hyper-TX
High Performance RAM- Corsair Twin2X 2GB PC800 DDR2 XMS2 CL5
Mobo- Abit AN52S
HDD- Western Digital 80GB HDD (7200RPM/8MB/SATAII)
- Western Digital 160GB HDD (7200RPM/8MB/SATAII)
HDD Fan- 2 X Cooler Fan for 3.5" Hard Disk
FDD- Sony 1.44 Floppy Drive (BLK)
DVDROM- LiteOn 16X DVD-ROM (BLK)
PCIE- Sapphire HD 3850 (PCX ATI 3850/256MB/DDR3/256BIT)
PSU- Acbel True 340W Power Supply Unit
still trying to learn how to set raid 0. meddling through diy manuals and text books through this night. btw happy chinese new year! :wink:
what is superpi? sorry for asking, still new at this stuff..
happy chinese new year! wait.. that power supply unit cannot tahan liao.. suddenly blow if you push processor too high. try find better psu first..
any suggestions? not that pricy one-lah.hehe i thought i invested enough money already. had to squeeze a bit extra for that sapphire pcie. :sweat: nanti i 'pokai' susah lo. lol
given my current specs, how far would you think i could push my proc? is it possible to reach 3-3.25ghz?
hmm.. superpi just to test initial overclock stability. do 1m then 2m calculation. hmm.. to be honest with you i not dare to overclock that proc with current psu. psu get fsp 450watt arround rm130.
thanx for the feedback tictac. :salute: still have to wait awhile b4 going to lowyatt. raye cine meh..
but if you daredevil guy. you can overclock that cpu bit by bit.. on default vcore only. monitor your psu 12volt line. make sure higher than 11.8v. if you push to hard on cpu. psu will blow.. if unlucky mobo vga memory also k.o. .. hehe
tictac, don't mind me asking, but what spec are using at the moment?
Motorola ROKR E1... :D ...
i dont have any computer... :(
i usually rent computer for surfing or use my mobile phone (opera mini) to post or view XS forums... poor me :slap:
No need for some pc-stuff with a girlfriend(?) like in your avatar! :D :toast:
??? :blurr: avatar pic not own headshot eh??? oic..gf--or is it?? :confused: hehe just joking..jgn mare ye
dun use malay word.. later they didnt understand.. how ur LE1620.. no result??Quote:
Originally Posted by warfreak75
oic, ok. hmm.. gonna start pushing my chip today hopefully, but bit by bit only like wat tictac said
push like a gentleman... ;)
sarawakQuote:
Originally Posted by warfreak75
i'm surprised that u're not familiar with my avatar ;)
why you change nickname ?
who change nickname? where, what? hehe fakhrain, i'm a newbie here trying to learn from u guyz the trick and trades of overclocking. warfreak75 a.k.a helmi from kajang, selangor, malaysia. nice to meet everbody here at xs
dream come true for me. just got to 3ghz. man, big achievement 4 me, i mean a first, considering that i was with an athlonxp 2000+@1667mhz and knew nothing about overclocking. thanx to all you guyz, sincere thanks from the bottom of my heart. luv u guyz.muah! hehe
yessss. got to 3ghz. luv u guyz! thanks for your guidance. b4 this i was with an athlon xp 2000+@1667mhz so 4 me this is quite an achievement, i mean my very first overclock! man, i'm still celebrating.hehe
testing