Any more thoughts on a 4Ghz Quad club?
Printable View
Any more thoughts on a 4Ghz Quad club?
So anyone tried max. fsb?
There is already another thread for this type of statistic: http://www.xtremesystems.org/forums/...d.php?t=157946Quote:
Originally Posted by dzeuk_ph
1) QX6700, B3
2) L639A615
3) http://valid.x86-secret.com/show_oc.php?id=243386
4) http://i16.photobucket.com/albums/b2...daylyclock.jpg
5) Water cooled (Thermaltake block)
6) 1.48 bios, 1.39-1.4 real
7) Asus P5W DH Deluxe
Hope you don't mind me using SMP as a stability tester... don't feel like shutting it down.
Hey Luis nice to have you aboard, but can you please get me a shot of it running prime? :toast:
I'll do SPI32M... If I get some time, I'll do a Prime 95 run.
Prime is preferable, and if you choose Pi 32m, I'm going to need a quad instance :toast:Quote:
Originally Posted by Luis_GT
Ok, so 2-8 hours of prime is enogh right?
as soon as my HDD backup finishes, I'll start it. :up:
My Q6600....
Q6600 G0 | L725B057 | 3608mhz | 1.352V | Liquid |
http://img75.imageshack.us/img75/445...4368fu9.th.jpg
http://img169.imageshack.us/img169/2...5578ia7.th.jpg
Q6600 G0 | L725B057 | 3708mhz | 1.40V | Liquid |
http://img241.imageshack.us/img241/7...140vnk5.th.jpg
http://img411.imageshack.us/img411/6...140vzm8.th.jpg
1) G0
2) L725B057
3) Water - D-Tek Fuzion
4) 1.352V@3.608Mhz - 1.40V@3.708Mhz
5) Asus P5K-E
By;)
That will be fine :)Quote:
Originally Posted by Luis_GT
List up dated again :toast:
Err...
I seem to have typed in an incorrect week-code for my CPU.
Please fix: "L727A786" to "L724A786". :)
My entry post #170 seems to be missing from your update.
If there's a problem with it please let me know.
RLM
@ craptacularone,
Need you to adjust the stable vcore on my entry, was getting errors on one type of workunit in WCG, the other 3 were fine, adjusted the vcore a bit and loosened some secondary memory timings, and all is well again.
Please adjust the 1.48 I had posted earlier to 1.52, thanks.
Also, don't know if it was mentioned before, but shouldn't the VID of each chip be listed as well?
List updated, errors fixed :toast:
list re-ordered to reflect voltages needed for clock speed attained aswell :)
1) QX6700, B3
2) L639A615
3) http://valid.x86-secret.com/show_oc.php?id=243713
4) http://i16.photobucket.com/albums/b2...T/th_Prime.jpg
5) Water cooled (Thermaltake block)
6) 1.52 bios, 1.408 real
7) Asus P5W DH Deluxe
here we go, as you can see, its nice and crispy... I'm glad I ordered a Apogee GT... this Thermaltake could barely keep up with my old E6600 :shakes: Most likely it'll do better once I get the new block.
Q6600 L727A673 G0
air cooled: Tuniq tower 120
1.375V bios
asus p5k-deluxe wifi
temps 38 - 67C
http://i159.photobucket.com/albums/t...3400stable.jpg
q6600 go. bios 1.19v, Low voltage with, core 3040 mhz
http://www.resimekle.gen.tr/imagehos...s/rIl53400.jpg
List Updated :toast:
@ Luis_GT damn dude! you can keep your house warm with those temps!
@ EXPANDER, I'm going to need more info than that to make use of your result. Give me the week, a shot of it running Prime @100% load (all 4 cores), cooling used, and motherboard.
Q6600 G0 | L725B057 | 3808mhz | 1.456V | Liquid |
http://img230.imageshack.us/img230/9...456vmw5.th.jpg
http://img215.imageshack.us/img215/8...456vxv0.th.jpg
1) G0
2) L725B057
3) Water - D-Tek Fuzion
4) 1.456V
5) Asus P5K-E
By;)
... why would I want to warm up my house... I'm constantly turning my A/C on...
Sad thing, My water temp doesn't break 30c
It was a joke.....you know "haha funny"?....:shrug:Quote:
Originally Posted by Luis_GT
And if your water temps are getting that high, it's almost definitely because of a poor block that's not transferring heat from the CPU.
@ dj883u2, updated your result :)
I know it was a joke... I was just saying that my house can't get any hotter... :rofl:Quote:
Originally Posted by CraptacularOne
Anyways... Apogee has been shipped... Soon I'll post an updated OC... one that doesn't reach 81C :p:
L719 GO, Q6600 1.19 Vcore 3040 mhz -60C phase change
SAPPHIRE HD2600XT GDR4
DFI RD600 UT ICFX 3200
2X 512 MB MUSHKIN DDR2 800 MHZ 4-4-3-10 2T - 1,8 V
ASUS 360 WATT PSU
WD 250 GB HDD
1.19 Vcore 3040 mhz
http://www.resimekle.gen.tr/imagehos...s/rIl53400.jpg
Default 2.4 GHZ 1 Vcore:)
http://www.resimekle.gen.tr/imagehos...s/gtU63985.jpg
@ EXPANDER, ahem, please I need the full FPO batch # if you've got it and I cannot add your result until you post a screen shot of it running at 100% load on all four cores. Booting into window means nothing, I can boot my CPU into windows at 4.2Ghz and open CPU-Z but it fails instantly in Prime95. So those screens are of no use to me :shrug: