DDR2: 650MHz club

asus p5b deluxe wifi with kingston hyper X pc9600@1300mhz 2,4V

http://s1.directupload.net/images/071115/uwmzgogx.jpg

SPi 1M @ 675.3MHz:

http://img265.imageshack.us/img265/3175/675mhz1mpa0.jpg

SPi 32M @ 652.7MHz:

http://img105.imageshack.us/img105/9...2mhz32myf7.jpg

2.47/2.52V

More to think i hope :)

RAM is Crucial Ballistix PC5300 3-3-3

E6600@3,825 with supertalent@637mhz @2,4V
cpu=FSB 425x9 with air

http://s2.directupload.net/images/071117/ap2m79cs.jpg

637 is not enough for 650 club. :slap:

Now get clocking and report back when you've reached 650! :D

Quote:

---

Originally Posted by Zeus

637 is not enough for 650 club. :slap:

Now get clocking and report back when you've reached 650! :D

---

Also, the front page hasn't been updated since August.

Well I thought I would resurrect this old thread hey!

This is without any tweaking or messing around, I did use 2.5v, but I'm pretty sure I can get more out of these for my 2.5volts worth. I didn't bother tightening timings, or squeezing mhz, maybe when I've got some time I will.

Was using OCZ 8500 D9GMH

Timings for any one interested are:

CAS - 5
tRCD - 5
tRP - 5
tRAS - 15
tRC - 22
tRFC - 50
CR - 2t
tRRD - 8
tWR - 6
tWTR - 10
Tref - AUTO
TRD - AUTO

Screen

http://img413.imageshack.us/img413/7046/650cas5ch5.jpg

4x 1Gt aXeRam 650Mhz 5-5-5-15 with maximus formula



http://mauri.1g.fi/kuvat/muuta/maxim...jpg_medium.jpg

some minor voltage bump...;)

Team Xtreem 652.9 MHz 5-5-4-12 @2.19v (in bios, though Windows sees it at as 2.12v)

http://i116.photobucket.com/albums/o...t435MHz2GB.jpg
http://valid.x86-secret.com/show_oc.php?id=280375

Crucial Ballistix PC5300 3CL

This is just the beginning also :D

http://aycu01.webshots.com/image/355...8412812_rs.jpg

mushkin 2x 512 mb ddr2 800mhz 1.8 v default 4-4-3-10

overclock: 2x 512 mb 2.4 volt 5-5-5-15 - 660.4 mhz
validate: http://valid.x86-secret.com/show_oc?id=209958

Crucial ballistix PC8500 :)

http://mekk.homeip.net/imagesharing/...4180faacb4.png

The startpost could use some updating. :p

It would be nice to mention what ram was used as well, i bet 75% will be Crucial.

LOL well at least I have some OCZ kicking, and I still think I can get close to 700 if I could be bothered setting a devider so I could ramp it up slowly. But might need more volts.

Yer front page update would be sweet.

Better add in my Transcend. 660 5-5-5-15 @ 2.5V on Gigabyte DS3R
Could go higher but board only allows 2.5V max :rolleyes:

yeah my boards max is the same :(

Highest and tightest super pi 32M passable memory clocks I've done to date thanks to DFI LP LT X38-T2R motherboard!

http://fileshosts.com/intel/DFI/DFI_...cpuz_valid.png

http://fileshosts.com/intel/DFI/DFI_...3m20s110ms.png

http://fileshosts.com/intel/DFI/DFI_..._bandwidth.png

2x1GB Crucial Ballistix PC2-8500 Tracer @675Mhz 5-5-5-9 at 2.55v

New personal best 32M passable clocks of 675Mhz 5-5-5-9 at 2.55v!

http://fileshosts.com/intel/DFI/DFI_...cpuz_valid.png

Click image for larger version below

Super Pi 1M

http://fileshosts.com/intel/DFI/DFI_...5ms_memset.png

Super Pi 32M

http://fileshosts.com/intel/DFI/DFI_...1ms_memset.png

http://fileshosts.com/intel/DFI/DFI_...everest_tn.png

2x1GB Crucial Ballistix PC2-8500 Tracer @681.5Mhz 5-5-5-9 at 2.60v

Bumped up vdimm and 32M @681.5Mhz 5-5-5-9 at 2.60v !

http://fileshosts.com/intel/DFI/DFI_...cpuz_valid.png

Super Pi 32M

http://fileshosts.com/intel/DFI/DFI_...8ms_memset.png

http://fileshosts.com/intel/DFI/DFI_...everest_tn.png

hmm i might wait for a rainy day (its summer here and always hot) and when its cool enough I might try for 700, I can get over 650 on 2.5v so 2.6 should get me close anyways. If they go poooof then so be it lol.

I wish I was still at sydney or melborne :( :(

I got this suicide clock with 2.55v, but currently it's only single channel as the other "half" is borrowed by my friend to finish his mainboard review..

just post this suicide first, will get back with the PI after I got back my other half. :D

http://teamreview.org/gen0img/TEAM_X...suicide255.jpg

it's still can do the Pi at 680 for the single, but I don't know if I have 2 sticks running.

anyway, this is the pi at 672 :) but still on single, got to wait for another pair :(
http://teamreview.org/gen0img/TEAM_X...GKIT/pi672.jpg

http://img232.imageshack.us/img232/92/4117tv2.jpg


2.5v :) Super Tallent CL4

Here my OCZ Sli Ready Edition 1066 @ 2.4V

http://www.abload.de/img/650mhzpidac.jpg

CPU was not highly overclocked for this test ;)


Edit:

Made today again some testing with 2.55V and SingleChannel :

High-FSB:
http://www.abload.de/img/663mhzboi.png

And low-FSB cause CPU was at it's end:
http://www.abload.de/img/675mhzmf5.png

Cellshock pc9200 @ 2,7v

http://www.pcxtreme.it/forum/imageho...aa86f6e2b4.jpg

Maybe ... i had to try 32m :D

http://www.pcxtreme.it/forum/imageho...aae2cc0d41.jpg

What mobo?

Maximus Formula :)