Printable View
nice run man, after you told me to increase the PCI-E, score increase a lot more. :D (but mine can only handle 138, ~140 i got 3D screen reflash problem, ~145 windows will BSOD :()
for P5B-E i can't go over 120.... so can't compare
thx for the tips man
Slight increase on the cards.
http://service.futuremark.com/compare?3dm06=2142764
http://kinc.bandwidth.se/23k2.PNG
Nice ghetto-style modification :toast:Quote:
Originally Posted by Kinc
hiya kinc in 3d06 is it better to use cas 3 at a lower memory mhz than cas 4 at higher mhz,i always thought in 06 the higher memory bandwidth helps but looking at your setupo i can see you prefer the tighter timings at cas3, i can run at cas3 (3.3.3.8) up to about 450 (ddr900) with my 6400c3's corsairs or about 550 (ddr1100) at cas4 (4.4.3.10) which should net the better result in 06, thanks
I havent tested since this board do not run CL4 well with kentsfield and its low fsb. I can run almost 500MHz on 2.55V though, 3-3-3 that is.Quote:
Originally Posted by GLENBOY
Yeah it helped alot getting the master card stable and not pass only 1 out 3 times :) I think I will try watercooling today to get the clocks up a bit too see if there is alot t gain from this, in othertests then Canyon Flight (06).Quote:
Originally Posted by Sampsa
Oh...cards are on air....nice. :up:
Though I think you should wait to get 1gb XTs before going water :)
Perkam
There is nothing to gain from bigger framebuffer in 3DMarks low resolution. especially in Crossfire. These 1.0ns GDDR3 are much tighter then 0.9ns GDDR4. I should replace my AMD board though with another ASUS.The memory is really bad on the AMD board.Quote:
Originally Posted by perkam
I just got a call, I might get 30l of ln2 before the weekend.
Bring on LN2!!! LOL
Nice results
Looking very good, bring on the LN2!
finally Kinc is going to show us some LN2 :D
meanwhile i am still trying to buy some LN2 container.......
heh you need dairy farmers close by, guess...
Dont think kinc has the LN2 yet, as his MSN nick is "Kinc - Nitrogen :'( " ;)
He'll probably get about 20L tomorrow, along with some DI to use on the master card (cascade for the slavecard).
4.9-5ghz kentsfield and 1100+/999 will be very interesting in 3dm06 :)
Just picked up 30l :)Quote:
Originally Posted by M.Beier
Is it cold enough for you?? :D
Now I'm expecting some records falling.
BTW today AMD sent to me nice e-mail about your 30K+ score in 3DM05! Their PR team is a little bit behind but still nice touch!
Peacefull.
http://kinc.se/before.png
looks really nice :D
First test proves 4 things.
1. CPU is atleast capable of 4900MHz (good news)
2. 125 fps in canyon flght is no problem with only -50C (very good news)
3. Silverstone Zeus 850W cant handle 1100/980MHz with a 4800MHz Kentsfield (kinda bad news)
4. Last but not least I need to inslutate better. Holy cow it's humid here now comapred to a month ago. Shutdown due to condensation only after 30 mins (bad but atleast I know why I had to shut down)
1. Really good! :up:Quote:
Originally Posted by Kinc
2. Same as above.
3. Kind of expected...(?) :(
4. Yes, the conditions must be kind of extreme here in sweden right now. I get condensation at the other end of the GFX right now. :( Atm I have 25 degrees here and very fuktig air. ;) I guess you have about the same.
Well, have fun with the LN2 and I hope you get some good runs this weekend! :toast: :toast:
At least the bad news is easy to fix. You need a 1kw single 12v rail psu and your power problems should be over. Since ocz bought pcp&c you might be able to get one in europe now:up: Very eager to see your results with ln2.Quote:
Originally Posted by Kinc
I will use a Coolermaster 850W for the gpus. Silvestone for the system. Should be enough.Quote:
Originally Posted by PanteraGSTK
Yes, that would work as well. Didn't think of that:am: Good luck.Quote:
Originally Posted by Kinc
I had 10l nitrogen for todays benching and it didn't go well on the graphic cards part. For some reason I cant pass gt3 (cayon flight) in 3dmark 06 anynmore. Not even on stock clocks. I'm pretty sure that one of the cards are damaged in some way. I will test em seperatly tomorrow.
I am damn sure of something though. 2900XT Crossfire will have a 25500+ score in 06 soon. GT2 scales very nie with gpu clock aswell as GT3 and GT4. We are looking at 10k+ SM2.0 and ~12k SM3.0 scores.
CPU wise it looks very good.
http://kinc.se/4950.PNG
Next 3DMark 06 test will be on friday or saturday next week at Dreamhack Summer 2007. We will have 4 intense days there with hopefully all the ln2 we need.