Super pi 1M @3.6ghz

Printable View

Show 100 post(s) from this thread on one page

08-28-2007, 05:13 AM
shimmishim

very nice kamel! but i think ddr3 scores shouldn't be allowed!!! j/k :)

just curious.... what hard drive are you using?
08-28-2007, 05:23 AM
Kamel

Seagate SATA II 250gb
08-28-2007, 11:05 PM
v_parrello

Quote:

Originally Posted by shimmishim

very nice kamel! but i think ddr3 scores shouldn't be allowed!!! j/k :)

....

I think the only constraint is cpu max frequency at 3609 MHz, the rest is not specified.
08-28-2007, 11:26 PM
dinos22

Quote:

Originally Posted by Kamel

think i'm gonna get the 1st place!

CELLSHOCK DDR3 1800
ASUS BLITZ EXTREME

http://web.tiscali.it/microcool/csddr3/primo.jpg

great run

if that CPU can handle 600FSB you could hit 13.7xx easy :D
i wonder with 128MB maxmem and/or lower trrd would do any better

i'm loving these ddr3 benches
08-29-2007, 08:03 AM
JMKS

Allendale striking back ;).

E6400 [under DI, wall on air ~510] 514.7x7 = 3602.8MHz, OCZ 9200 Reaper VDimm 3.2V => 4:5 4-4-4-4, modded strap [10, 24, 03, 04, 09 for those who know what it means ;)], all with Commando

RAM was really nicely scaling with V and it survived many hours with VDimm ~3V.
If sticks are still alive? hmm... half-dead unfortunately, one of them is not booting if VDimm < ~2,8V, although it was already in that state during this bench.

15.031s and it is probably not maxed out :)
http://img210.imageshack.us/img210/3...ish4sg8.th.jpg
08-29-2007, 08:50 AM
Learn

Quote:

Originally Posted by JMKS

Allendale striking back ;).

E6400 [under DI, wall on air ~510] 514.7x7 = 3602.8MHz, OCZ 9200 Reaper VDimm 3.2V => 4:5 4-4-4-4, modded strap [10, 24, 03, 04, 09 for those who know what it means ;)], all with Commando

RAM was really nicely scaling with V and it survived many hours with VDimm ~3V.
If sticks are still alive? hmm... half-dead unfortunately, one of them is not booting if VDimm < ~2,8V, although it was already in that state during this bench.

15.031s and it is probably not maxed out :)
http://img210.imageshack.us/img210/3...ish4sg8.th.jpg

Great time. Next time sub 15s :D
08-29-2007, 09:21 AM
jmax_oc

Very impressive time ! I love your timings ;)
08-29-2007, 09:22 AM
jmax_oc

36GP 1M C2D 2Mo
15.094s| Jmax_oc | E6300 | Blitz Formula | Crucial Ballistix PC8500 @ 642mhz @ 5-5-4-1
http://www.jmax-hardware.com/ftpjmax...GP/15.094s.JPG

36GP 1M C2D 4Mo
13.875s| Jmax_oc | E6850 | Blitz Formula | Crucial Ballistix PC8500 @ 643mhz @ 5-5-4-5
http://www.jmax-hardware.com/ftpjmax...GP/13.875s.JPG
08-30-2007, 06:55 AM
douirc

14.187 G.Skill F2-8000PHU2-2GBHZ

http://img212.imageshack.us/img212/8262/spi1sh9.jpg
http://img259.imageshack.us/img259/5352/bios011im8.jpg
08-31-2007, 02:32 AM
BeardyMan

13.836 at 3608 400.9 5/8 641Mhz 5-5-5-4-7 PL 5 25 -10 -10 -8

Basic tweaks ,dirty instal, trying to figure out how Eram works , japanse is not exactly my language :D
After clean instal some Gautam ass whooping ;)
08-31-2007, 03:10 AM
dinos22

Quote:

Originally Posted by BeardyMan

13.836 at 3608 400.9 5/8 641Mhz 5-5-5-4-7 PL 5 25 -10 -10 -8

Basic tweaks ,dirty instal, trying to figure out how Eram works , japanse is not exactly my language :D
After clean instal some Gautam ass whooping ;)

screenshot?
basic tweaks?? bull:banana::banana::banana::banana: basic tweaks.....you've got something good going on there :D
sharing is caring :D:D:D:D
08-31-2007, 06:33 AM
AuriL

e6850 @3600
mushkin xp6400

basic tweaks , only 14.188

http://img406.imageshack.us/img406/7697/spi14188br8.jpg
08-31-2007, 12:33 PM
BeardyMan

Quote:

Originally Posted by dinos22

screenshot?
basic tweaks?? bull:banana::banana::banana::banana: basic tweaks.....you've got something good going on there :D
sharing is caring :D:D:D:D

for me those are basic tweaks, the known stuff :D
my final result wil be screened :up:
08-31-2007, 04:42 PM
Gautam

I'll tell you what's BS, xx.836 is not a possible Pi time. :rolleyes: Don't try and mess with us.
08-31-2007, 06:26 PM
dinos22

Quote:

Originally Posted by Gautam

I'll tell you what's BS, xx.836 is not a possible Pi time. :rolleyes: Don't try and mess with us.

you reckon
maybe it was a bugged run like that other guy

but looking at his timings i am a little surprised at the time :confused:
08-31-2007, 06:38 PM
Stapler

Quote:

Originally Posted by dinos22

you reckon
maybe it was a bugged run like that other guy

but looking at his timings i am a little surprised at the time :confused:

Seeing what this guy has posted in the past I really don't put anything past him:down:
08-31-2007, 06:44 PM
dinos22

Quote:

Originally Posted by Stapler

Seeing what this guy has posted in the past I really don't put anything past him:down:

really
is he being an idiot?
i would ban him if he's here to :banana::banana::banana::banana: with us
08-31-2007, 07:10 PM
Stapler

He's been banned a couple times before.
08-31-2007, 07:17 PM
Gautam

Quote:

Originally Posted by dinos22

you reckon
maybe it was a bugged run like that other guy

but looking at his timings i am a little surprised at the time :confused:

My time is faster than the one he claimed. It's just that 836 is not a possible suffix. Nothing between 843 and 828. No, this ain't quite a bannable offense lol. But he does need to stop screwin with us.
09-01-2007, 01:48 AM
BeardyMan

I have reinstalled windows and was able to push my time even lower, made screens coming from 13.922 -13.859 - 13.828.
Tomorow i should get a custom version of 2003 wich should be a little faster for superpi as well and perhaps a better time.:)
09-01-2007, 04:50 AM
before

M/B：ASUS P5B-Deluxe 1.03G P965C1 rev., Vcore, Vdroop, Vdimm, Vmch mods
CPU：Intel Core2 E6700 L633A550
CPU cooling：Watercooling Alphacool
Memory：Wintec PC2-8000 C5 1024MBx2
VGA：Jaton 8600GS
HDD：Western Digital 80GB
Power Supply：Antec TP 550W
Vcore：1.360V(Bios)
Vdimm：2.62V(Actual)
FSB Termination Voltage：1.45V
NB Voltage：1.71V(Actual)
OS：Windows Server 2003

http://img292.imageshack.us/img292/3...m13875slh0.png

Notice CPU-Z bug... reports 512MB instead of 2048MB and can't shows specifications of the memory kit.

One of my modules don't want to boot anymore... :( Have to wait a while and give it a try again.
09-01-2007, 05:07 AM
dinos22

do you think that one of those RAM modules is looking like it's gonna die

i have a similar thing going on with one of my kits

first one module would not boot at stock voltage and now both

Xavier stick it in a freezer for 5 minutes and boot up after taking it out
it will boot :D
09-01-2007, 05:08 AM
dinos22

Quote:

Originally Posted by BeardyMan

I have reinstalled windows and was able to push my time even lower, made screens coming from 13.922 -13.859 - 13.828.
Tomorow i should get a custom version of 2003 wich should be a little faster for superpi as well and perhaps a better time.:)

what no more .836 :p:
09-01-2007, 12:04 PM
BeardyMan

Quote:

Originally Posted by dinos22

what no more .836 :p:

Lol dinos :D
*i have reinstalled windows :D *
Wich was a stripped down Windows Xp with sp 2 :)

edit*
Trying some new settings right from the box around 0.1 faster then previous settings.

http://users.telenet.be/kuan/13938.JPG

http://users.telenet.be/kuan/13937.JPG
who said what about 0.043-0.028, lol learn your lesson
09-02-2007, 11:18 AM
Bigchrome

Emm, Beardy man, you seem VERY confused! And btw 13.937 is not .1 faster...it's .1s slower.

Scores Have been updated and I've changed the way they're listed to make it easier for me...Hope it's not too much worse??

Really impressed by Your big push JMKS! Much more interesting than the 4mb cat. so far.

BTW, No problems with DDR3 results....it's all welcome!

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 08:45 PM.

XtremeSystems