Printable View
Mates, yesterday I've done some tests with the memorys. I could run a full Nature test with the mems at 500, at 2:3, 4-4-4-12:
Cpu: 400 FSBx9 (2:3)
Mems: 500 FSB
The problem now is when I try to boot at 500 (1:1) the system doesn't boot, the max I could boot was at 480 FSB.
I'll do more tests in the meanwhile.
Best wishes.
Jorge
Really nice scores mates:toast:
I sold my card today but damn i miss it already and maybe ill buy new one..
Cos it is the best card for that money..
Good luck to all of you and greetings from Estonia:)
I look to this post and i thought i coul use some information from here, so i decided to pst here my results with my X1950XT... I'm testing some timings, i can eve bench with 3DMark2001/2005, although i cant search for articrafts for too long with ATI Tools... My screen goes black for a few seconds and then it turns on and ATI Tools clock speeds are set to default... So i have to resart again configuring timings to make some changes and test again...
My timings at this moment are:
10-10-14-14-9-40-0-0-15-6-10-12-28-23-12-48-9
Some pics...
3DMark2005 with E6600 @ 3.6Ghz
http://img413.imageshack.us/img413/8...ngs3600xb1.jpg
3DMark2005 with E6600 @ 3.42Ghz
http://img201.imageshack.us/img201/7...imings1ue4.jpg
3DMark2001 with E6600 @ 3.42Ghz
http://img408.imageshack.us/img408/1...imings1mg8.jpg
Tomorrow i will keep testing to try to reach the top of my Stock Air Cooled Sapphire X1950XT...
MSI RX1950XT
http://i111.photobucket.com/albums/n...0888/H0002.jpg
DEFAULT(621/1800)
http://i111.photobucket.com/albums/n...0888/H0009.jpg
http://i111.photobucket.com/albums/n...0888/H0010.jpg
OVERCLOCKING(675/2000)
http://i111.photobucket.com/albums/n...0888/H0011.jpg
Are your graphics card timings in default??? Those are nice results...
What kind of memory ram you have?? And timings?
Mine are 2 * 1 Gb Teamgroup Xtreem DDR2-667 @ DDR2-800 3-3-3-8...
Thanks Winter, it's sad seeing you leaving the competion, but life continues, and you have the 1st spot! ;)Quote:
Originally Posted by Winterwind
Best wishes
Jorge
you guys should check the memory .
I check my sapphire today and cames with 1.0ns memory( GDDR3 , 2.0Ghz rated) :toast:
regards
I just received mine today. How do you tell if its got 1.0 mem?
in memory " chips" :
http://img20.imageshack.us/img20/1065/dsc00060ub3.jpg
also in this review >> http://www.tekbunker.com/forums/inde...showtopic=2067
Quote:
Sapphire 256 MB X1950XT PCI-Express Graphics card featuring some higher speed 256mb 1.0ns memory that has a stock speed of 1800 MHz.
they all(atleast sapphire) are 1.0ns hynix:stick:
i wrote it a while ago and gave someone bios to tweak
Mine is HIS. I'm hoping it's a 1.0ns chip. I'm gonna change the cooler so I might check the chip as well. Thanks.
Mine is from PowerColor and used also Hynix 1.0ns chips. ;)
btw. i use the mem-timings of the x1900xt on my x1950xt, with no problem. :D
What is the advantage of using X1900XT timings on X1950XT? Isn't X1950 should be faster?Quote:
Originally Posted by Turrican
Quote:
Originally Posted by Rudyn
the mem-timings of the x1900xt are much tighter, so they are faster ;) :
X1950XT memory timings :
11-11-15-15-10-44-0-0-15-6-11-13-32-25-14-54-10
X1900xt memory timings, which i use :
8-8-12-12-10-35-0-0-15-6-12-13-27-21-10-45-8
Quote:
Originally Posted by Turrican
Hmmm got to give a try! :slobber:
Do you use stock voltages to get those results on the mem timmings?
Thanks in advance.
Jorge
Quote:
Originally Posted by jll
Yes, i used stock voltage on the memory.
i'm now on 930mhz , and have no artifacts or else. :)
looks like, the card is more fillrate related. there's no difference in performance between 930 and 970mhz on the memory. :stick:
on the core i'm at 730mhz with 1.525V.
Quote:
Originally Posted by Turrican
What cooling system do you use to cool down your GPU? Isn't that vcore too high for only 730mhz???
i'm using watercooling ;) 730 isn't the max. i havent't tried more, yet ;)Quote:
Originally Posted by PsySc0rpi0n
Hello mates, I've managed to use the 1900XT timmings on my x1950XT with the mems set to 1000 Mhz and with less voltage than the default! :woot:
I'll post a screen later for you guys can see!
Best wishes
Jorge
Quote:
Originally Posted by jll
yeah, :toast: maybe 1000mhz will work on mine too :D
i also posted in this thread at the begining about the memory timings that in x1950xt are more relaxed than in x1900xt
But i tested and its better default timings and High Mhz than tighter timings and less Mhz
you got better score with x1900xt timings but only with low Mhz like 900mhz/950Mhz but its better 1050mhz default timings then 950mhz x1900xt timings
regards
Thats true mascara, but the good thing is that with this card were able to get tight timmings at higher speeds than the one by default and with less voltage.Quote:
Originally Posted by mascaras
I'll post my ATI Tool settings for you guys to see.
Best wishes
Jorge
Just got my Saphire 1950xt in today, and my Thermalright hr-03.
Got the HR-03 on , using passive mode right now (no room for a fan since i mounted it with the HR on top).
So far (5 minutes) so good, temps are only 2C above stock cooling. So I am at 52C idle.
Later I might stick a low rpm/cfm fan in the middle of my case blowing through the fins from the side straight towards my exhaust and see how it OC's.
Stock speeds on my comp got me 11,100 in 3dm05. Same as my x1900gt @ 700/800...So we'll see how it does.
edit: quick test in some quake4, temps hit 92C passive..mmm better get a fan..
cheers
Jesus, the hottest I've seen my gfx was 65º, after some WOW playing hours, and it's using the default cooler.Quote:
what?
edit: quick test in some quake4, temps hit 92C passive..mmm better get a fan..
Better get that fan :)
Best wishes
Jorge
i'm looking forward to see your setting, maybe they'll work on my card too :DQuote:
Originally Posted by jll
thanks in advance