Retail Conroe 2 Duo 4 GHZ Club w/Dbase

Printable View

Show 100 post(s) from this thread on one page

10-01-2006, 05:59 PM
kcnyc

I have a week 26 X6800..........ran 3.96GHz@1.485V with the stock heatsink. Should do 4GHz no problem.....just need to upthe voltage to about 1.55 I think.......
10-01-2006, 06:08 PM
The Nemesis

I have now created a database that will be updated regularly. For the moment I've made entries from just about every "mostly complete" post in the thread. Please send me your complete info as outlined in first post. Incomplete info will be removed from dbase shortly.
Thanks Silver Bullet for our Avatar. You guys can grab it :)
10-01-2006, 06:31 PM
dr_sharp

31 of 39 were on Asus boards LOL
10-01-2006, 06:41 PM
sierra_bound

Quote:

Originally Posted by The Nemesis

I have now created a database that will be updated regularly. For the moment I've made entries from just about every "mostly complete" post in the thread. Please send me your complete info as outlined above. Incomplete info will be removed from dbase shortly.
Thanks Silver Bullet for our Avatar. You guys can grab it below:)

Thanks for taking the time to put together the list. One minor correction. My board is a P5W64-WS Pro and not the P5WDG2-WS Pro.;)
10-01-2006, 07:13 PM
The Nemesis

Quote:

Originally Posted by sierra_bound

Thanks for taking the time to put together the list. One minor correction. My board is a P5W64-WS Pro and not the P5WDG2-WS Pro.;)

Corrected:)
10-01-2006, 08:48 PM
Grinch

ok guys this is the place for me to ask if you all can give me a push in the right diection for getting 445x9 or more...right now I am at 400X9 @ 1.45V in bios 100% stable...I have tried EVERY Vcore in bios to get to the 4ghz mark and just can't seem to get it...computer just restarts...here is what it looks like in my bios:

CPU Type: E6600
Clock SPeed: 3600Mhz
Stepping: L627A795
Vcore Set in bios: 1.45v

Cooling: water
Cooler brand/model: See Sig

Motherboard: ASUS P5B Deluxe
Bios Version: 0614
Memory: G. Skill HZ
Rated speed: 6400
Timmings: 4-4-4-12 @ 2.3V

What suggestions would you have me do?
10-01-2006, 11:27 PM
kcnyc

Quote:

Originally Posted by Grinch

ok guys this is the place for me to ask if you all can give me a push in the right diection for getting 445x9 or more...right now I am at 400X9 @ 1.45V in bios 100% stable...I have tried EVERY Vcore in bios to get to the 4ghz mark and just can't seem to get it...computer just restarts...here is what it looks like in my bios:

CPU Type: E6600
Clock SPeed: 3600Mhz
Stepping: L627A795
Vcore Set in bios: 1.45v

Cooling: water
Cooler brand/model: See Sig

Motherboard: ASUS P5B Deluxe
Bios Version: 0614
Memory: G. Skill HZ
Rated speed: 6400
Timmings: 4-4-4-12 @ 2.3V

What suggestions would you have me do?

VCORE might be too low......most of these guys in this thread are using around 1.5V - 1.6V.
10-01-2006, 11:51 PM
Vassili

Quote:

Originally Posted by The Nemesis

I have now created a database that will be updated regularly. For the moment I've made entries from just about every "mostly complete" post in the thread. Please send me your complete info as outlined above. Incomplete info will be removed from dbase shortly.

Could you also post a file? That would be great. :)
10-02-2006, 12:47 AM
sierra_bound

Here's another contribution. Same CPU, different board.

CPU Type: X6800
Clock Speed: 4026MHz
Stepping: 6 B2
Week: L623
Code: A610
Vcore set in bios:1.6v

Cooling: Air
Cooler brand/model: Tuniq Tower 120

Motherboard: ASUS P5B Deluxe Wifi-AP
Bios Version: 0614
Memory: Corsair
Rated speed: 6400
Timings: 4-4-4-8

http://img137.imageshack.us/img137/5303/32m4026uw3.jpg
10-02-2006, 12:54 AM
Highland3r

Here's another contribution

CPU Type: E6600
Clock Speed: 4632MHz
Stepping: 6 B2
Week: L628
Code: A723
Vcore set in bios: 1.74v

Cooling: Dry Ice
Cooler brand/model: Chilly 1 CPU tube

Motherboard: ASUS P5B "vanilla"
Bios Version: 0509
Memory: GSkill
Rated speed: 6400
Timings: 4-4-3-4

http://drunken-student.co.uk/pics/pc...-41_pi_32m.JPG
10-02-2006, 02:19 AM
fatty

CPU Type: E6600
Clock Speed: 4104MHz
Stepping: 6 B2
Week: L624
Code: unsure
Vcore : 1.74-5v

Cooling: Mach2 chilly1 head r507 self made
Cooler brand/model: Chilly1 head self modded mach2

Motherboard: ASUS P5B Deluxe wifi
Bios Version: 0614
Memory: Adata
Rated speed: 800-1000
Timings: 6-5-5-15

http://i102.photobucket.com/albums/m98/fatty_025/41.jpg
10-02-2006, 03:50 AM
Grinch

Quote:

Originally Posted by kcnyc

VCORE might be too low......most of these guys in this thread are using around 1.5V - 1.6V.

I have tried every vcore the bios has.:toast:
10-02-2006, 05:44 AM
TraX

CPU Type: E6600
Clock Speed: 4319MHz
Stepping: 6 B2
Week: L624
Code: A792
Vcore : 1.7v

Cooling: DryIce
Cooler brand/model: Custom Copper Block

Motherboard: ASUS P5B Deluxe wifi
Bios Version: 0507
Memory: TeamExtreem 800
Rated speed: 800-1000
Timings: 5-5-5-15

http://i60.photobucket.com/albums/h1...SuperPI_11.jpg
10-02-2006, 05:44 AM
Dani

@The Nemesis

..I wish my E6600 would do SP8M @ 4503MHz with AIR, that should be an monster WR :D

But it is'nt, right speed is 4053MHz SP8M and code is A120 :)
10-02-2006, 06:01 AM
Grinch

so far the board..chip..ram all good at 500FSB:

http://valid.x86-secret.com/show_oc?id=126547
10-02-2006, 06:40 AM
Dani

This is 4GHz thread, not 3.5GHz:nuts:
10-02-2006, 07:06 AM
The Nemesis

Corrections & additions made..
10-02-2006, 07:18 AM
Revv23

wow nemisis, very nice work dude.

Thaks for taking all the time and effort to put that all together!
10-02-2006, 08:24 AM
Grinch

Quote:

Originally Posted by Dani

This is 4GHz thread, not 3.5GHz:nuts:

no $hit Sherlock...that's why I am asking for advice...:slapass: :toast:
10-02-2006, 03:38 PM
Tallman

Will this work?

http://img138.imageshack.us/img138/8...en01fd1.th.jpg

I tried to use cpuz, but it will not let me verify with 1.36 anymore , it says I have to update. So, I updated to 1.37 but....I can only boot to windows @ 3.95 and have to clockgen my way up. Then I cannot open cpuz cause it says the driver is in use!
Same thing if I open cpuz first, then try to open clockgen,,,it says driver in use. You cannot use clockgen and cpuz 1.37 at same time.

retail box 6700
4001 Mhz
step 6 B2
week 23
code A549
vcore 1.7 in bios

cooling Air
Scythe Mine 3

Mobo Asus P5W-DH Dlx
bios 1402
OCZ DDR2-1000
rated 1000 4-5-4-15
timings 5-6-6-15

Update: :woot:
I found that Systool and cpuz1.37 play nice together :D
4003 Mhz Validated
10-02-2006, 04:54 PM
vmsein

Here's another contribution:

CPU Type: X6800
Clock SPeed: 4014MHz
Stepping: 6 B2
Week: L623
Code: A464
Vcore Set in bios:1.5125v

Cooling: Peltier waterblock
Cooler brand/model: Swiftech MCW5002-775T

Motherboard: ASUS P5W64 WS Pro
Bios Version: 0215
Memory: mushkin XP2-8000 Redline
Rated speed: 8000(500mhz)
Timmings: 4-4-4-8
http://img86.imageshack.us/img86/3713/446fsbyo8.th.jpg
10-02-2006, 08:43 PM
The Nemesis

Poll added to determine optimal pixel size of dbase for viewing:)
10-02-2006, 09:10 PM
ncsa

Thanks for taking the time out to collate this info. Here is the missing items from my chip.

X6800 L624 A610

GeIL PC2-8500

BenQ 202W

Quote:

Originally Posted by The Nemesis

Corrections & additions made..
10-02-2006, 11:48 PM
Hazzan

Quote:

Originally Posted by Pjoeloe

Nice score :D but 1.63V Vcore :p: . I`ve fried my retail e6600 with 1.6 Volt so ....:rolleyes:

You haved tryed your E6600 with AW9D MAX ? how max you get FSB ?:) :)
10-03-2006, 07:52 AM
Mykou

update with superpi 1M@4.00 ghz ( both cores running )

http://img201.imageshack.us/img201/919/supku5.jpg

a pity I can't run 1:1 :(

Show 100 post(s) from this thread on one page