3000+ BH5@3,73v ultra-d vapo LS
1M
http://pk.robotron.ee/26.985.png
2M NB!- mem-timings should be same as on previous screenshot ;)
http://pk.robotron.ee/62.641.png
Printable View
3000+ BH5@3,73v ultra-d vapo LS
1M
http://pk.robotron.ee/26.985.png
2M NB!- mem-timings should be same as on previous screenshot ;)
http://pk.robotron.ee/62.641.png
0517 APHW LBBLE on air with Gigabyte G-Power Pro Cooler @ 3200 rpm, suicide screehshot
http://img.photobucket.com/albums/v6...ylase/3GHZ.jpg
Validation : http://valid.x86-secret.com/show_oc?id=25623
benny - do you use a Tagan 480w? SmartGuardian shows my +12v rail really low too...
here is the venice i just sold: LBBLE 0516CPBW
http://img296.imageshack.us/img296/6...cpbw32m8kq.jpg
pathetic. :shakes: i didn't raise the NB voltage though, but still...
my 360w psu got a very nice rails then!!look!!no brand 360w
For the most part I've been with out a decent set of ram since the day after I got this chip over 3 weeks ago. :slap: Since my new set of LEs arrived from OPB on the 1st and then earlier today the 7/2 bios was released I just had to play! :banana: I mean after all I've set a WR with this chip but we still haven't got to know each other. :p:
Warmup, since the 0515 APAWs are know for a weak mem controller I just wanted to stress the CPU and not push the ram yet. :p: BTW this is being Air cooled by my XP-90 in my Antec SOHO server case with the door closed. :D
SuperPI 32M
10 x 291 @ 1.55v
9:10 (180) mem divider
http://img175.imageshack.us/img175/8...1ghz32m4am.jpg
Time to push the memory and mem controller! :toast:
SuperPI 1M
10 x 291 @ 1.52v
no divider
http://img175.imageshack.us/img175/757/291ghz1m9vx.jpg
1M at 2.91GHz was no problem as I expected but I was concerned about 32M...
SuperPI 32M
10 x 291 @ 1.55v
http://img175.imageshack.us/img175/4...ghz32m12qz.jpg
I was suprised at this result. I did not have to change a single timing. :toast: Lets move on to my final and my personal favorite test, Max 1M time. :D
SuperPI 1M
10 x 293 @ 1.52v
http://img175.imageshack.us/img175/1580/293ghz1m6jt.jpg
I could smell a 28 second 1M but I just couldn't pull it off. That should just about wrap it up, the pictures speak for themselfs. If everything goes according to plan I should have a 3000+ 0517 and some RedLine to play with sometime next week. :banana: Maybe with some RedLine running at 260MHz+ I'll be able to break the 28 second 1M mark on air so stay tuned! :cool:
here is my screen shots!!anyway i cant hit 3G,in case my PSU is a :banana::banana::banana::banana::banana: 360W Thermaltake 20pins dude anyone can help me out ??i can get fully stable with 2.95G on 1.55V what do i need for more clocks??i use stock AMD Fan now.my BIG TYHOON sold:(but samething only increase 6C on stock votage!
As posted in the 24hr primestable thread :)
Venice 3000+ LBBLE 0517DPMW @ 2.8GHz 1.472v, primestable for 28 hours before I stopped it.
http://exscape.org/2800.png
this one ?prime95 i can do more than 30hours ,but but.....i forgot to take a shot i have this one now. :stick: [IMG]http://i16.photobucket.com/albums/b1...1/DSC01076.jpg[/IMG]
[IMG]http://i16.photobucket.com/albums/b1...1/DSC01131.jpg[/IMG]
[IMG]http://i16.photobucket.com/albums/b1...1/DSC01124.jpg[/IMG]
Quote:
Originally Posted by exscape
this is mine 1.43V on AMD stock,too hot temp~~~anything greater than 55C will frozen .
[IMG]http://i16.photobucket.com/albums/b1...1/DSC01114.jpg[/IMG]
here is mine 3200+ 0517 bpew
ihs off ,26°c ambiant t°
spi 32M
http://img242.imageshack.us/img242/6...aker8rz.th.png
prime 48h
http://img249.imageshack.us/img249/5...inal6qc.th.png
edit : prime screen
I took out my 9800pro and poped in an old pci graphics card, it allowed for some better clocking, pc didn't shutdown at 1.65 anymore or 1.7 but i think 1.75 did shut down this is all voltages selected actually is -0.1v, I was able to get it to 3.2ghz before it restarted, didn't get a screeny tho but, On my way there I stoppedd at 2.99ghz for this.
http://i21.photobucket.com/albums/b275/4rory/wahoo1.jpg
I forget what the ram was at, this is a bad screeny I know but I had to do it twice lol becasue I clicked ok the first time after it was done.\\
Right now I got 18amps on my 12volt line, and 480watts total, Should I go down to 450 watts and 26amps on 12volt line, or should I go up to 520watts and more amps on the 12volt line.
Nice clocks there 4rory. And to think earlier you mentioend that you had a bad memory controller and had to use 1 dimm with max divider to go past 2.9, now you say you hit 3.2! Whatever you changed, excellent improvement, you've got a fine chip.Quote:
Originally Posted by 4rory
Yeah, you need something with more amps on the +12V rail. Modstream isn't bad, do you have the money for the 520 powerstream?
Anyhow, to stay relevant, here's my latest
0517 APJW 3000+ @ 2.86 Ghz
http://img.photobucket.com/albums/v7...%20shiat/2.jpg
Now i am officially prime stable here, i have never let it run that long, no patience. Usually i run with less voltage because most of my tasks aren't as demanding as prime95, nothing important on my PC so works fine.
http://briefcase.pathfinder.gr/downl...32m%403240.JPG
http://briefcase.pathfinder.gr/downl...3251+25sec.JPG
These benchs are old and the vcore was way high my last tests with phase was 3250@ 1.66v...now i am with modded stock hsf because my single stage phase has a small prob.....
lowered my vcore a bit... 2808mhz at 1.63v
http://www.panelo.com/images/2808ghzsm.jpg
here is my new venice 3000+ 0517DPMW baught last week in a shop in Paris:
http://img129.imageshack.us/img129/7...dpmw2zk.th.jpghttp://img129.imageshack.us/img129/6...raph0oy.th.gifhttp://img129.imageshack.us/img129/7...core5ej.th.gif
http://img147.imageshack.us/img147/4...raph5xq.th.gifhttp://img147.imageshack.us/img147/6...olt31mq.th.gif
http://img147.imageshack.us/img147/2...olt53uu.th.gifhttp://img147.imageshack.us/img147/4...lt125vq.th.gif
I'll see what it does with sp2004 when I'll have the time but somebody else have a venice 3000+ which pass OCCT at 2700@1.34V in air? :banana:
room temp was about 23°C
I saw that peter_lu had 2800@1.4V but the screen shows that he ran sp2004 for just 1min
update for my 3000+ 0517DPMW
soon 3.7GHz on cascade
http://membres.lycos.fr/cpulloverclo...que/27.422.gif
frequency max spi 8M = 2983MHz but 5'02"1XX
http://membres.lycos.fr/cpulloverclo...e/5.00.875.gif
http://membres.lycos.fr/cpulloverclo...ique/24.17.gif
3000+ 0517APCW
Air Cooled by XP-90
SuperPI 32M
http://img144.imageshack.us/img144/5...731532m4nv.jpg
3000+ 0520 EPMW
DFI NF4 ultra
1x512 MB A-data PC4000 (Have almost been killed, the only run memtest at max. DDR400).
Vapochill SE
24/7 - It haven't crached og lockup once.
http://i10.photobucket.com/albums/a1...de/3GHz32M.jpg
My max screenable - so far. I can't get my FSB over 350 (This was med by blowing a 120 mm fan at the chipset cooler).
http://i10.photobucket.com/albums/a1...pade/33GHz.jpg
A new high for me :woot: Benchable 2.91 on air. Fails prime right away, but is fairly stable. Also a 32m at 2.8 which is 100% prime stable.
Alrighty. I received a 3500+ CBBLE 0512 DPAW yesterday. So far so good. I can pass 8M Super Pi up to 2.9ghz (290x10 1.55v) If it passes 8M then it will do everything I need without a hiccup. 32m is just to damn long!
I can get a suicide shot at 3ghz but I can't do much other than browse. I tried 300x10 and 273x11 but nogo either way. Not to bad for a second hand cpu that I bought here for a great price!!! I have only had one other 2.8ghz+ cpu and it was a 3500+ claw that ran to damn hot. I am psyched to finally get a low voltage cool running 2.9ghz cpu! :toast:
Dfi nF4 ultra-d
tccd adata pc4500
watercooling
@vstock
http://cisko08.free.fr/pc/venice0512...0occt%20ok.PNG
:banana:
this chip right here week 19 from ewiz its a 0519DPJW LBBLE and heres the oc so far with a few benchies....Quote:
Originally Posted by dng29
peace perc,
My 0517 APJW running with a little more volts at 2.9 Ghz
2 hours prime stable and still going
(still air cooled by XP90)
http://img.photobucket.com/albums/v7...03-2-hours.jpg
I picked up one of the Venice 3000+ CPUs that was being discussed in the Deals forum. At $115 I figured I could take a chance. I got a YBBLE 0524DPBW.
Early results are okay but not great. I'm SuperPi 32M stable at 2.7ghz on air. I think I'm pretty near the limit because I'm giving it almost 1.7v (1.55+13%) and that's usually where diminishing returns kick in hard. Surprisingly the Thermalright XP-90/Zalamn 92mm combo I'm using seems to be holding the temps at load to a MBM reported 42c.
I'm using the the shipping bios (3-10) on this new Ultra-D mobo and got my OCZ Platinum Rev.2 TCCD out of retirement. Still trying to tweak the settings a bit.
http://img299.imageshack.us/img299/8...524dpbw4gz.jpg