Printable View
ThxQuote:
nice one
Im trying to do as much as i can from the parts i have
Its a good thing that R23 is very cheap in Poland (as well as R22)
Tomorrow ill try to build the rest of my system so everything will be ready for the new flex hoses and dual evaps...
Forgot to ask 1 more thing:
What should be the ratio between the high and low side of a II stage ? is about 40:1 ok ?
btw, I'm doing this project only cos I happend to find the freezer for free.
dont have the cash to do one from scratch.
also I'm not useing Suva95 cos that stuff costs 240€ per kg and the minium order is 4.5kg (=1080€!!)
woops misunderstanding?
CC, Macci is the man.
He could have an avatar of a cruton with some frost on it and chances are it will still beat our ass in the end.
yea... there's no beating that Finn :) he's the king period.
His website is truly an Overclockers shrine/museum. If it contains silicon and metal traces, MACCI has overclocked it.
C
captaincascade,
dont get me wrong - I have huge respect for berkut and all the other phasechange pros around here. I have learned a lot of things from here.
ok I (finally) got some data on these comps I'm using, there necchi 21cm3 r22 units, nominal capacity 778W
cc, im tryin to reply to ur PM but it says ur PM mailbox is full
some idle temp testing :D
http://www.solidhardware.com/macci/cascade/-96c.jpg
macci, how is your cascade charged ? Do you vapour charge it to a certain temp or charge it like a normal system during work. What are your static pressures ? Do you have any relief tank?
ah dammit, you tied me. now i gota build a 3 stage.
good job man.
competition makes us all achieve.
oh and also throw a rag over that thing for insulation, you'll probly get better temps.
try it now macci
macci dou have a baker block on there? i cant really tell since theres to much frost on it;) sweeet job man and what kinda load are u puttin on it? what are u using for an idle load?
Some guys are always lucky :)
looks like a hollow evap ^^Quote:
Originally posted by Pimpsho
macci dou have a baker block on there? i cant really tell since theres to much frost on it;) sweeet job man and what kinda load are u puttin on it? what are u using for an idle load?
And some of us work hard to find all their parts like u and me ;]Quote:
Some guys are always lucky
:D Don't go giving him ideas. :rolleyes:Quote:
Originally posted by FUGGER
CC, Macci is the man.
He could have an avatar of a cruton with some frost on it and chances are it will still beat our ass in the end.
its a macci evap :D
base is some socket A full copper heatsink (volcano7+ style just a bit smaller), then a piece of copper pipe and copperplate on top of that.
and like I said that was only idle temp test, no load (except surrounding air).
I tested it with the 156W pelt (Umax 15.3V IIRC) running at 12V and then the evap temp went up to -75C zone. heatexhanger was not insulated at this point and I have a feeling that the captube might be a bit too long for that heatload.
berkut, its charged normally, cant remember the pressures and whats a relief tank (sorry I dont know the terminology)??
The heatexchanger is insulated now. Gotta test it some more soon =)
nice....that evap looks kinda huge....how r u gonna insulate it?....i must see.....
Day 1 at Comdex done, almost 24 in operation on the Comdex floor. 72 hours left.
Flawless operation so far.
Got any pictures to gaze at ?Quote:
Originally posted by FUGGER
Day 1 at Comdex done, almost 24 in operation on the Comdex floor. 72 hours left.
Flawless operation so far.
I'm looking forward to a Prescott on this rig, can you give any idea when you will have one to play with ?
Regards
Andy
So Fugger...
What's gonna' be a hotter chip? The first Prescott's or the EE Northwood??
C