hope I am not thread-crapping here or anything
just wanted to let anybody know who is interested...
MicroCenter in St. louis Park, MN has two 0607XPMW right now @$297...saw them the other day...in case anybody's looking ;)
Printable View
hope I am not thread-crapping here or anything
just wanted to let anybody know who is interested...
MicroCenter in St. louis Park, MN has two 0607XPMW right now @$297...saw them the other day...in case anybody's looking ;)
I had a increase in speed and lower temps when running my X2 with IHS off under my Water setup. Now i run phase it a too bigger risk. Good luck with it.;)Quote:
Originally Posted by MikalCarbine
hehe my new stability test :)
Attachment 46939
aircooling
I heard that folding with a potentially/unstable cpu could result in corrupted data being sent into the database which messes everything up :stick:
I'm not aware of that, Mikal. An unstable rig will quickly show up as trashed work units which are rejected.
yeah dunno what it means in english but its marked as miscalculated,Quote:
Originally Posted by stone_cold_Jimi
dont know the exact word in english...:rolleyes:
having a little fun testing with jinu117 single stage. ;)
3.3ghz and rising
http://img204.imageshack.us/img204/2...led54on.th.jpg
Man you gotta tell me... wth did you do to break that 3.2ghz barrier?Quote:
Originally Posted by Alex08
BTW, I am done with speaker wiring lol... going to zzzz.
when i got back home, I cleared cmos. I ended up leaving the memory timings to auto. Bumped up the chipset and ldt/fsb voltage by 0.1. It booted at 3.2ghz into windows, used clockgen to 3.3ghz. Later on I tried 3.3ghz in the bios and it booted up into windows just nicely. So maybe a little bump in the volts and clearing cmos did the trick. :woot:
I'm able to boot into windows at 3.4ghz, but core 0 craps out in prime after 5 minutes. core 1 keeps on going and going.
you'll have to tell me where you ended up putting those rear speakers :p:
Quote:
Originally Posted by stone_cold_Jimi
Wasn't aware of that, I remember reading it back in the day on the prime95 website so maybe things have changed :)
As for my CPU...
2.8GHz is stable on 1.52vCore and I can't seem to get 2.85 stable. I tried up to 1.55v. I might decap it this weekend or try it on an Ultra-D instead of this expert. Smason (who had the 4200+ with same stepping) hit 3003Ghz on 1.55v (not sure which cooling yet)
i was unable to push mine pass 2.9 on my friends WC system :(Quote:
Originally Posted by stone_cold_Jimi
i been wondering other ppl's results with the UPMW batch and i feel better that i'm not the only one who feels like they got a dud even tho it OCs better than other batches b4 :woot:
i'll try again later with a new board n ram
My first Dualcore arrived.
It's a LDBFE 0607 TPMW.
T Chip with a really Evil Batchnumber:666.
Stock Vcore is only 1.3v.
She is Priming now @ 275x10 with 1.35V Bios (Windows shows only 1.31v) cooled with TTBT.
I know your pain, My LDBFE 0610 UPMW was good to 2.8Ghz @1.53v on air but any higher and I couldn't get prime stable and that was with going over 1.6v. Not a bad run but would have liked at least 2.9Ghz @1.55v or so.Quote:
Originally Posted by MikalCarbine
I'm looking for another try with the 3800x2's (hopefully something closer to the 3.0Ghz area this time), are there any good batches coming out of newegg or monarch recently? Will look into watercooling probably later this summer for a little more too.
I can get a 3800+ or a 165 for 'free' from a shop in Holland.
With the recent good results for the 3800's would this be the way to go? I know of a few very badass 165 steppings as well though...
might as well get the 165, seem to retain value longer
Any "good" clocking chip will retain it's value ;)
LDBFE 0609 XPMW 'N'
Initial Play
http://img300.imageshack.us/img300/6...mfft5nr.th.jpg
A sneek look to see what happens when the Vcore is increased
http://valid.x86-secret.com/show_oc.php?id=92977
You should try using your 10x multiplier. It might help you lower the needed voltage to hit certain clocks.
Well i have an LDBHE 0603 xpaw ¨T¨ I have it running at 2.6 1.43 v on bios and 1.4 on smart guardian, speedfan says 1.41. Will try more with better cooling.
Love this thread so much and too bad this is not sticky.
Bought a 3800 X2 on 5 May from a local shop. I don't suppose to got this week code by now but it is LDBHE 0601XPMW by mistake. This baby really did her job great. After one week of normal usage with default voltage @ 2700hz. I try 2900hz with 1.5v in bios and it's stable with 4 x sp2004 for 4 hours+:woot:. I thought the temp did hold my back leg. Need a nice H2O badly to go further :stick:.
I'd read through the thread and notice that a nice burning in did help the chips getting better performance. Can anyone show me the correct process to burn in this baby in details. As I tried burnk7 before and it really destroy my old opty 170 (make both core more unstable:slapass:).
Any input are appreicate:toast:
Great work stone_cold_Jimi :toast:Quote:
Originally Posted by stone_cold_Jimi
I'm very sorry for your mum :(
I updated my score / infos
Just got a LDBFE 0614 WPMW will post some results over the week end :toast:
LDBHE 0605 XPMW
http://img.photobucket.com/albums/v4...a/cpu-temp.jpg
Recently got a LCBWE 0617 FPMW. Does anybody have an idea if it is a good stepping?
LCBWE - not a Manchester, I'd say. Toledo with half cache, I bet. Probably cold-bugged.
Yes cpu-z says Toledo. Is that a bad thing?Quote:
Originally Posted by stone_cold_Jimi
results ?
Core 1 seems great but unfortunatly core 0 doesn´t seem stable over 2750 Mhz.
Maybe some burnin over the night will help.
No, not really, but I rate the Manchesters as better clockers. Well, 2006 ones in particular.Quote:
Originally Posted by Dr.Leary
Heya Jimi,Quote:
Originally Posted by stone_cold_Jimi
Just wanted to stop by here and let you know that I'm picking up my cooler today. I'll try to get in some -110C action on your cpu tonight ;)
I have an X2 3800+ CCBWE 0528MPMW now.
Cpu -z says it's a MAnchester core , but it's showing revision JH-E6
CBid tells me I have a Toledo core
Do i have a Toledo core with 2x512Kb cache disabled?
yesQuote:
Originally Posted by Jaco
:toast:Quote:
Originally Posted by s7e9h3n
I've been keeping half an eye on your autocascade progress - crunch time, then. Bet it coldbugs... be great if it doesn't though.
I see that x2 3800s are the AMD of choice for discerning Rosetta crunchers heh -
http://www.boincsynergy.com/stats/cpus.php?project=rah
update mine. 2.95@ 1.55v LDBHE 0606EPMW ihs off
I originally tried for 2500MHz with 1.30 volts... it was prime stable for about an hour but the temps got a bit too high for my liking 53 deg C so I backed it down to 2400MHz with 1.25 volts and all seems good :toast: HSF used was the Thermaltake K8 Silent.Quote:
Originally Posted by bugeyes
http://home.swiftdsl.com.au/~apollo1..._WPMW_001C.jpg
Of interest: one of my colleagues at work has bought a bare-bones system with a Gigabyte mobo inc on-board nVidia 6150 and a LDBFE 0610 x2 3800. He's using it for video editing and format conversion.
This is his first AMD machine, he was a solid Intel man before, and he's loving it - without even overclocking. He says biggest difference, apart from the sweet performance, is the on-die memory controller; he reckons that his P4s are weird because process memory usage grows until eventually the machine needed a reboot, whereas the AMD is economic in this respect. That sounds like a mobo thing? He also reckons that s939 mobos come bundled with many more features than those for Intel CPUs; I was arguing that Intel's Core Duos were looking better all the time for the price, but he was arguing that you pay more for the complete system due to the lack of bundled goodies.
It was an interesting and unexpected discussion.
Just got an CDBAE 0609 RPMW. Anyone have some results to share?
i've got CCB1E 0609 FPMWs (165s, though) and they're pretty spankin' chips...i'd assume that a similar production week/ramp would yield pretty good results.
dave
Hi all!
reciently, I got a two news X2 3800+:
- CCBWE 0601XPMW
- LDBFE 0610UPMW
Wich of two processors is most better as his Stepping?
I think that the LDBFE 0610UPMw is most good than CCBWE, what do you think?
Thanks so much
ldbfe is a manchester and ccbwe a toledo...i would choose the manchester (better overclocler imo)Quote:
Originally Posted by Jackarturo
Oh thanks man, then, I choose LDBFE ;)Quote:
Originally Posted by Supertim0r
Bye all
waiting results :p: ;)Quote:
Originally Posted by Jackarturo
4200+ CDBHE 0607TPMW
No cold bug at as low as -29'C. Core1 is much weaker than Core0 (almost 200MHz delta). Still tweaking.
Yeah the LDBFE 0610UPMW is a good one, but also a rough one,Quote:
Originally Posted by Jackarturo
You can check out my results here... its back around page 20 or so...
http://www.xtremesystems.org/forums/...&postcount=507
Its a good chip, hope you can get better with yours, mine was a T chip.
I'm pretty tempted to pull my opty170 back out and put this one back in.
I had a LDBFE 0610UPMW , didn't have much luck with that one. sold it a few days later. Like Drinkcarlos says , mine was a very rough and difficult cpu.Quote:
Originally Posted by drunkcarlos
Thinking of it now , i should have tried harder ...
My 3800+X2 0607 Tpmw passed with flying colors 2800@1.39v cooled wit TTBT.
Now she is on water and there is no more OC.
2800 seems to be the limit.Temps are not the matter.
What can I do? Are there any special settings? Tref or so?
I got mine under phase now. Can boot with 285x10 and 140 divider. Got crappy memory that can´t go over 206 Mhz. Cpu is (almost)stable in Windows @300x10 with 133 divider if i use clockgen. Why is it that I can´t boot with 133 divider over 230 htt? It was not possible on water either.
We got the same PSU.
Perhaps that's it.
I'll try the new 900Watt Tagan soon.
Driver: Anything yet?
I bought a 700watt Tagan Dual Power and removed the Ihs.
She didn't clock higher.
I'm waiting for a new Waterblock now.
Still finding the limits with this chip, but looks good so far :D
DFI Nf4 Ultra Infinity
Thermaltake Blue Orb II
X2 3800+ Manchester LDBFE 0614 WPMW
2 x 1GB Corsair Value Select DDR400
1 x Leadtek 7800GTX 256MB
4 x Seagate 300GB SATAII raid 0
I've only prime tested up to 2.6 GHz but don't want to put more thane 1.425 volts through it, as I only have modest air cooling.
http://home.swiftdsl.com.au/~apollo1..._WPMW_009A.jpg
http://home.swiftdsl.com.au/~apollo1..._WPMW_011A.jpg
Hey guys, first post over here. I'm from DFI-street and i think I might be the first post in this thread with the stepping I have.
Last week I bought a LDBFE 0619WPBW stepping 3800+ X2 from Fry's. It appears to be to be a relatively poor overclocker with a "quicky OCing session" that yielded a 2.65GHz @ 1.59vcore under water. I don't know how stable this is but either way... it's not good.
Quote:
Originally Posted by Thraxz
wow... sorry about that bud...
I always get :banana::banana::banana::banana:ty chips...
Oh well, it's going into my mom's rig and I'll only OC it to whatever it will do on the 1.4v "stock" voltage. She won't tell the difference.
I'll just hang on to my 2.85GHz 1.59vcore 170 opty CCBWE 0546XPMW (good for stepping, lower end overall.)
i can get the
LDBSE 0614 WPMW
is it any good?
:S so no one has any info on it? LDBSE 0614 WPMW
LDBSE huh.. that's a new one :banana: Might as well test it out :D
BS eh? Give er a run and tell us how it runs....maybe it'll beat the covetted LDBHE 0601s
Haha, i can either buy the x2 3800+ with that stepping for $430AUS or buy an opteron with a damn good stepping for $500AUS. !
Some1 give a really biased opinion now!
I took the same risk with the CCBBE 0610 165 (I was one of the first along with Spazilton to own a CCBBE 0610 opty) and look how it turned out :D
Alright guys i just found another one, CCBWE 0544, i know you all want me to test the new one, ill buy the new stepping only if this is some dodgy stepping.
hahah i think the asian lady accidentally gave me a 4400+ stepping >:\
3800 X2 LCBIE 0618 EPMW
Cold Buggered
http://img82.imageshack.us/img82/844...epmw8xp.th.jpg
Asrock Sata 2 Board
Gskill HZ
Stock HSF
2.5Ghz @ 1.35v
http://img82.imageshack.us/img82/177...0mhz1vy.th.jpg
2.7Ghz @ 1.35v
http://img82.imageshack.us/img82/558...0mhz6gr.th.jpg
TCaseMax
http://img87.imageshack.us/img87/559...emax8uf.th.jpg
This Chip Was tryed on my Chilly1 Phase but wouldnt post with anythink over 240 FSB. Im sure this chip would be a serious clocker if it was on water.
Got 3800+ Manchie from frys its a LDBFE 0619WPBW
Doing 2800mhz at 1,550v 100% stable but it can go higher even if I up the vcore to 1,7v not even 10mhz more... realy strange (not even in clockgen...)
Looks like the 0619 stepping is a bit on the hit or miss side.
just getting startede on my 3800+ x2 :D
LDBFE 0616WPMW
batch #49
http://valid.x86-secret.com/show_oc?id=101856
mach2 thinking bad mount -10)c bios , next week dice time :)
Quote:
Originally Posted by blind_ripper
Mate, very impressive. At least urs dosent have the cold bug.
Keep us updated with how it goes.
What Vcore u using on that mate. Whats max Prime Stable?
Is that a suicide shot? Even so, that's a good 'un. Expect 3100 stable if so.Quote:
Originally Posted by blind_ripper
on air..vcore is 1.43v,in fact it does 2880mhz on ide hdd..sorry dont know the stepping cause hs is removed and i ve lost it..:(
tahhttp://img141.imageshack.us/img141/9...primex20wf.jpg
stabel dont know yet get + temps on load :p think that she can bench @ 3.2ghz ;)Quote:
Originally Posted by stone_cold_Jimi
yes its ss
i dont prime ;) its hand pickt :p so yes its not coldbugd .Quote:
Originally Posted by 4Qman
vcore 1.68v on a N chip :p it likes the cold :D
Anyone with X2 3800+ LCBIE 0618 RPMW
Rthats mine :fact:
http://valid.x86-secret.com/show_oc?id=99460
still testing :)
http://i3.photobucket.com/albums/y90...er/3200mhz.jpg
Mate i can bench at 3200Mhz with the LDBHE stepping, however Core 2 will fail prime after 10minutes or so. Just wondered if this was the case with urs.
Looking good tho mate,id say its around as good or better than this one i have which also is picked from around 7 3800X2's :D I run 3100Mhz 1.55v Prime stable. I think im gona pump some more juice thro it.
Whats the Max 24/7 voltage u reckon on SS Phase with one of these.
yeah core 2 is weaker :( but im running load @ + temps :p
http://i3.photobucket.com/albums/y90.../2900prime.jpg
still testing , hope that a dice run would do it good
Like ur style mate.lolQuote:
Originally Posted by blind_ripper
i run 1.6v on my SS 3100mhz 24/7. 3ghz needs around 1.45v so may turn back to that. Then again maybe not.lol
lol i can run benches up to 3.15ghz @ 1.52vcore :DQuote:
Originally Posted by 4Qman
http://service.futuremark.com/compare?3dm06=360283
dos 06 use dc or only sc ? but what wtf i can run 3d ass much as i want but no 2d
ss update
http://valid.x86-secret.com/show_oc?id=102227
:D 1.72vcore -6°c bios -10°c bios whats dice gone give me :p
Dude thats very impressive, when u get Dice on that chip id be looking up the WR database mate.:D
Mine aint a touch on that mate and im running a SS with -50 Evap idle.
BurnIN - Core 2 Fails after 5minutes @ 3200Mhz. Core 1 is solid so i plann to see how burnining the CPU goes.
http://img366.imageshack.us/img366/6...nin29ip.th.jpg
Sorry for the thread necromancy, the attachements found in the 1st post appear to be dead, can someone point me to a backup copy or an updated version ?
I was curious to see how my 43rd of '05 LDBHE E4 Manchester measure up against the newer crop.
i have a 4400+ CCBWE 0538XPMW and it maxes out at 2.8 GHz@1.6v, and even then its not stable. :( does cooling a chip off alot help much with overclocking? or does it just let you crank the volts up?
i might have to get me one of these '06 3800+'s...when i have a processor and it maxes out at what the high end processor can do (FX-62 = 2.8 GHz :() i think its time to replace?
No, cooling helps with mhz as well. You can normally gain a good few extra mhz at the same voltage with colder-ness.Quote:
i have a 4400+ CCBWE 0538XPMW and it maxes out at 2.8 GHz@1.6v, and even then its not stable. does cooling a chip off alot help much with overclocking? or does it just let you crank the volts up?
not to be too off topic, but if id use chilled water, 2.9 GHz might be possible? the highest SuperPI 1m stable clock ive been able to do is 2.84 GHz (284x10 2.5-3-3-8) which i find pretty lucky. got the CPU and the RAM doing better than it usually did. heh. i cant believe its still almost $500 usd for a 4400+. cant wait for the price drops. maybe ill get a 3800+, i like the 10x multi...11x is just easier to work with?Quote:
Originally Posted by don_vercetti
okay, I flipped through 3-4 different pages, and decided that 28 pages was too much to catch up on. If I were to buy one of these... say... next week, what should I expect on some decent air cooling? 2.7, 2.8? If I sprung for a low end water system?
Ryan
Air or Water makes no big difference in my case.Good Aircooler are equal to low end Watercooling Systems.
2.6 - 2.9 all is possible.
I wish I would have picked up an X2 3800 sooner, Mine just wont do 3.0 I cant even boot into windows ,2.9 and 2.8 very stable but thats it. I am so :( well maybe when the prices drop I 'll pick up another one.
Mine will Bench @ 33oomhz on phase and run solid at 3150. On Water it maxes around 2.8/2.9 Most do mate.Quote:
Originally Posted by mar-one
Maybe try swapping it with someone who has phase as urs doents have the cold bug.:p:
thanks 4Qman for the info, I guess my next big purchase will be a phase system or build one.
I just received two ada3800daa5bv ldbfe 0622EPMW chips from mwave. I'll let you guys know how these OC.
ok, so far the one I've tried goes to 2500mhz at 1.4v with 10 minute P95 sessions. I cranked it up to 270x10 and it didn't boot so who knows. Also core one seems about 4-5* cooler than core 2.
Oh. it's a 63* TCASE chip. The temps are 1-2* higher than my single core at the same V in the same hot room.
Quote:
Originally Posted by Dave_Sz
Can you put it on >1.5v and see how it o/c?
Only 2.5GHz? Darn I have the exact same stepping and I was hoping for atleast 2.8GHz... Got any CPU-Z screen shots?Quote:
Originally Posted by Dave_Sz
nope, I tried it at 270x10 with 1.43v and it froze my PC at maybe 9 minutes into dual SP2004. I'll pop the other CPU in tomorrow but it seems they are consecutive numbers so I doubt there will be any difference. Chances are it will do 2.9ghz but it would need 1.55v most likely, I like to keep my cpus as near to stock as possible. Anyway, as soon as I finish my basement I'll try some hardcore OCing since it's about 80*F in my office right now.. As of now, the stepping maxes out at ~2600mhz with 1.43v.
just got my ldbfe 0622 wpmw , and its looks like 2.6ghz @ stock volts, and my dell heatsink @ 5v. temps are 44c idle, and 50 load, with about 35c ambient. I can't try my volts, because my board, well, doesn't have any voltage adjustments. I'll probably be happy anyways. Dual core 2.6ghz, and its fairly quiet. I'll do more tests when i get my nf41 from RMA.
ALso,i noticed that the core is about 35% SMALLER than my 0529 x2 3800.
core measures ~10mm X 16mm compared to the older 13.3mm X 16mm. ???? is it early 65nm ????
http://webpages.charter.net/aari/isit65.jpg
0529 x2 3800 , 0622 x2 3800, 0551 operton 144
Wow, that's interesting Menlatin, but I doubt it's 65nm... Do you have a CPU-z screen shot?
ah, you know, i just realized something. My 0529 was probably a Toledo with half the cache disabled, so thats why it had a larger core.
but here's some screen shots.
new - http://webpages.charter.net/aari/new.JPG
old - http://webpages.charter.net/aari/prime.bmp
why does it say the tests ran for 26000 hours???
sure I'll try it with 1.55 but the temps would get really high. MBM5 reports the temps in the 40's but Core Temp shows them in the 50s, this is with just 1.41v.Quote:
Originally Posted by harbin
My Dad's 3800+ X2 just came in, got it installed and all the drivers & tweaks done. Runnin 261x10 @ 1.4v rock solid stable.
MSI K8N Neo4 Platinum/SLi
Zalman CNPS9500-AM2
2x1GB Patriot 3200LLK @ 218MHz 2.5-3-3-7 @ 2.7v
It's an LDBFE 0619WPMW, revision BV.
Havn't really pushed it further but it's runnin great. :D
http://img.photobucket.com/albums/v1...zzzzzzzzzz.jpg
the voltage is actually 1.458v
the other chip I tried, freezes my PC with sp2004 running at 1.42v at 2300mhz, yikes.......