Try again with 2810MHz 1.36Vcore and CPU-Z on screenshotQuote:
Originally Posted by babyelf
Thank you
:)
Printable View
Try again with 2810MHz 1.36Vcore and CPU-Z on screenshotQuote:
Originally Posted by babyelf
Thank you
:)
here
babyelf you have same stepping as me
:D tedy
how is urs doing?
it's really bad :(
needs 1.485v (1.425v cpu-z) for 311*9
altho mine cooling sux but on the other hand temperature are way below 50°c so i got no clue what's wrong
bios?Quote:
Originally Posted by TEDY
5/10-3 let me write everything in sig.
hmm same.. 510-3 as well.. orange slots for my bh-5
3ghz WOOT
0517 GPPW
Stock air:
240*10 with stock voltage prime95 stable
270*10 @ 1,72V 32M stable
babyelf: what cooling do you have ?
using my corsair cool now :)
snapped it up for a bargain tooQuote:
Originally Posted by babyelf
edit: lol in 3 months you've posted 50 posts more than I have done in almost 3 years
arf i hit 3ghz but then my system crashed :p
In a month if i got some more time then i am going to tweak my venice a bit.
Must have 2.9ghz stable at 1.55-1.6V :D
3ghz? :)
yeah nice but your stepping is better then mine :)
ok. but which code ? which is the important code or week ? I think "paw" is good code :confused:Quote:
Originally Posted by TheMeatFrog
week is more important. Week 17 and some week 16's are good. *PAW and *PMW are both very good.
AIRCOOL : XP90C with 90@5V
IHS REMOVED idle 23°C 21°Room (mobo on a table)
http://www.yamafoto.com/users/vroom/...n9cyc9xxkh.gif
I'm beginning to think it is my board which is holding me back. My 0446 winchester and both 0517 and 0518 Venice chips perform the same
~2400mhz on stock voltage
I have been plagued...
Just got a week 19 3200+in from monarch and it sucks ass. Will only do 2.4 no matter what voltage I put through it. If I clock it any higher, it just crashes when I try to bench it with superpi or prime.
Guess my 2.6 week 16 wasn't so bad after all.
Don't feel that bad.Quote:
Originally Posted by fullup3
I went through a 0517 and 0518 which clock exactly the same, 2700mhz with 1,7Vcore
I believe its my board though, as 3 of my cpus have clocked almost the same...
juliette.. what did u set in bios? there's a lot of things that can affect the overclock
check here www.i4memory.com :)
eva's there and he's got a wonderful guide with how to tweak for venice
From Newegg.
http://img234.echo.cx/img234/2428/core2he.jpg
http://img157.echo.cx/img157/8484/1079696qd.jpg
It can be possible that mo board does not allow me to control but of 317 mhz of HTT?
I have not managed to improve it of this point :slap: .
Until soon
Testing fore a friend , haven`t seen this APLW before, anyone else ?
http://home.online.no/~andr-sei/Fosc...oldis3000+.JPG
LANero.. try putting max async in bios to auto.. and try again..
guide is here :) http://i4memory.com/showthread.php?t=327
Nope, I haven't...just as I still haven't seen anyone else with my 0516 EPKW. Oh well, they're not missing out on much...300x9 at 1.728v and nothing less for voltage...temp limited like nothing I've ever seen.Quote:
Testing fore a friend , haven`t seen this APLW before, anyone else ?
Thank you very much by the suggestion babyelf ;) .
I have tried to put the MAX Async Lat in AUTO but as soon as attempt to pass of 317mhz this is what I obtain :slapass: :
yea.. that's what i have been getting as well..
play around with ur drive strength + max async and read preamble
go down in the guide.. and u'll see his results with different max async + read preamble
erm why my pc reboots when i try OCCT or PRIME but it does super pi ok...
example 325*9 at 1.6v (cpu-z)
yea.. same.. venice + prime does not go very well.. duno y
everything else is stable.. superpi games etc.. just prime.. so i discarded it as a stability test
This information is VERY IMPORTANT!!!! If is true .....suxxxx!!!! :mad:Quote:
Originally Posted by arj
babyelf
320Mhz on board :clap: .
http://img107.echo.cx/img107/2372/291888lu.jpg
Not yet he is 100% stable one, but at least already I can run pi of 1M.
The only form to obtain to this fué leaving Tref, Twr, Twtr, Trtw, etc in AUTO and starting in 320 Bios from giving this is the result.
http://img166.echo.cx/img166/3919/tweaker1qp.jpg
Thank you very much by your aid friend
no problem.. try playing with max async latency and read preamble..
read eva's guide :)
erm what has memory timings to do with cpu ocing ? :)
http://i4memory.com/showthread.php?t=327
check here.. with differnt max async + read preamble superpi passes more or less depending on different settings :)
I am going to give an attempt to this and hope to return with better results.
I believe that this CPU needs a little burn to improve.
Until soon
Memory timings play a major role in oc. As does the ability to remove heat from the cpu. Colder cpu = easier oc. This was 0516 FPAW and I never took the time to see if it could do more, i.e. with like a 10X multi or just more HTT. [IMG]http://img22.echo.cx/img22/6715/3ktwk2fc.jpg[/IMG]
[QUOTE=coop]Memory timings play a major role in oc. As does the ability to remove heat from the cpu. Colder cpu = easier oc. This was 0516 FPAW and I never took the time to see if it could do more, i.e. with like a 10X multi or just more HTT.[...]QUOTE]
Well done coop :toast:
What cooler are you using? Tamb at??
11C, i'm guessing chilled water
very cold water, I used my water cooling setup and replaced the fans with a block of dry ice for that.
Thanks for the photo, I was thinking about wc, but I see the fan control on the screen and so I've guess very cold temp ambient :D
Quote:
Originally Posted by coop
which CPU block ur using? and ur motherboard and cpu arean are isolated?
0517APLW , watercooled.
http://home.online.no/~andr-sei/Fosc...venice2799.JPG
It is a copper ingot from Swiftech (6002). It is fairly large and heavy, but removes heat very well and is very affordable. Yes, I painted with liquid electrical tape around the cpu area. Then, foam insulation and grease. I would suggest reading about condensation proofing, I don't know if this is the place to be discussing it. It is most important as when it starts to form it quickly becomes out of control and forms anywhere air is exposed to the cold. If it is around anything electrical that is not protected you could loose your board and or cpu. You can PM me if you like.
After the Burn of 2 Hours.
http://img234.echo.cx/img234/5855/1m0291723gf.jpg
I continue trying to obtain but stability.
Where is the best place to order a Venice in hopes of getting a good stepping?
Also, would a 3000+ or a 3200+ have a better stepping?
Thanks
Really good, but I think that is really more than enough for this kind of cooling :)Quote:
Originally Posted by coop
When I use TEC cooling, with colder temp than you I use only foam on mobo and on on wb and all is perfect ;)
Anyone??Quote:
Originally Posted by derektm
Go to local store hand pick one. pay a little more if you are into stepping. I believe most of us buy few and return whats not decent or sell them.Quote:
Originally Posted by derektm
Ah ok. How much more would one be at say Compusa than newegg? As long as its not way overpriced I don't mind.Quote:
Originally Posted by jinu117
Hmm: http://www.compusa.com/products/prod...524&pfp=BROWSE
I'll have to go by CompUSA and pick one up. You think thats a good price? Wish I could get them to beat newegg's price.
Edit: Crap, no stock... CompUSA - :slapass:
venice 3200+ currently at 2780mhz 32m spi stable
LBBLE 0518EPAW
Watercooled full load temp 42-43
Huge voltage thoughQuote:
Originally Posted by QUARK
Yeah man, it's a crazy voltage, be carefull ;)Quote:
Originally Posted by derektm
Muahahaha! I have 2.8ghz at 1.77V :DQuote:
Originally Posted by Toki
quark lower you voltage to max 1.5
i need 1.52 for 2850 !!!!
Some of us need an insane viltage to reach such speeds, many Venice CPUs suck a horses behind.
I can't find any local stores that have any Venices. We don't have Fry's here. Any suggestions? :(
I've got an Idea. Im going to start calling every online retailer and see if they will tell me the steppings they have.. if I get any that will tell me, what should I ask for? What would be the BEST and if they didnt have that what would be good. Need a list to ask for
Thanks everyone :)
Edit: Mwave.com: "No theres NO way!" - Wow that was a Bit**!!
Do NOT call these people. :stick:
3000+ EPAW and DPBW seem good
317*9 after 2h 35 minutes prime errors :)
1.275*123% bios aka 1.52 appx in cpu-z
not bad eh for Zalman 7000b-alcu :woot:
www.thegrafixguy.com Was really nice but he said they have several differnet warehouses and that its not possible... hmmm maybe all these online retailers ship from the same warehouse?
Go to the closest chinatown, forget about CompUSA-type places. If you find a place with the AMD64/ FX flag in the window , go there and find the guy with the worst hair possible, and ask him if you can hand-pick a chip.
Regardless of week, it is always a bit of a crapshoot, but if you know exactly what ones you're looking for, that might work. They probably only have ones that aren't even listed on here yet.
Well I don't believe Arkansas has chinatowns. All the places I called here still have suckass socket 754's or not any Venices, or they don't even know WTF a Venice Core A64 Is!Quote:
Originally Posted by Fission
Anyways, I found an online retailer that is helping me pick one out (hopefully). Im holding right now while they check all their stores stocks.
if i lower my voltage it won't get in to windows. and its stable for now. i will try to go higher in a couple of days when i got the time for it. btw whats the highest vcore anyone have tryiet?
http://slike.slo-tech.com/14148.jpg
LBBLE 0516 GPDW :woot:
Nice, cooling?
This was on my LP previous to now.Quote:
Originally Posted by Toki
Yo crazy man :DQuote:
Originally Posted by Juliette
What's the point?Quote:
Originally Posted by coop
Really cold water, but I guess not more than a 226W TEC setup on the mobo/cpu.
Point was, your cold is isolated under the heatsink in a small area. I had/have to bring mine from a much further distance and condensation presents more of a problem if not insulated properly. Thus the more extensive insulating technique, even though it may not be as cold as yours.
My system specs in sig.
This is 32meg pi stable / prime95 .
http://members.ii.net/~ebeattie1/32m...table%20oc.JPG
And this is all i could get max (unstable).
http://members.ii.net/~ebeattie1/cur...0best%20oc.JPG
Im really dissapointed because all the other EPAW's seem to be getting 2800mhz. :(
Is PSU holding me back ?
Kinda worried cause +12v line is so low ?
http://img151.echo.cx/img151/8448/pic13uz.th.jpg
Yes but I see that you have isolated the tube properly, so I guess that the condensation from the source of your cold is finsh :)Quote:
Originally Posted by coop
I think that on the mobo you can use only foam, for sure ;)
How is above 12 volts on the 12v rail low? :p:Quote:
Originally Posted by TEDY
dunno at 317 or 318 when i try S&M 1.70 quick 100% load PC reboots , why ?
maybe temps too high ?
did u ever thought of ur ram holding u back?Quote:
Originally Posted by 0g1
shutdown when temp is above xx°C (maybe you filled this in bios)
That can be your problem :)
Because of burning in my 2700mhz stable at 1.45V moved to 1.376V :D
There is also an amd 64 bit driver for windows. Some say it helps with oc'ing.
nah i set it to 65°c hehe
Nah, i think i took that out of the equation when i set HT (ie LDT) to 2x, used 100 divider, and also put the ram timings to SPD. Of course, its not like that in the screenshots, because I was already sure of my max cpu speed before increasing the memory/HTT speed.Quote:
Originally Posted by babyelf
try a 2X LDT multiplier..
has anyone use 0519 week?
hehe
latest results
317*9 rock stable at 1.45*110% = 1.595 (1.54 cpu-z)
http://img60.echo.cx/img60/5339/prime3172zk.jpg
THat's not a low 12v whatsoever ;)Quote:
Originally Posted by TEDY
3000+ LBBLE Venice 0516GPEW
Prime/Superpi/OCCT stable @ 300x9 2.7GHz 1.57v Watercooled
yeah...want to know as well. doesn't seems to be a good week but since i've yet to see any result on this 0519, i'm not quite sure. i'll be receiving mine this couple of days. was hoping to get week 17 but no luck :( . probably the full code will be :Quote:
Originally Posted by kosmonova
ADA3200DAA4BP
LBBLE 0519DPBW
Z649096E50124
is it any good, guys? :idea:
remysix try it :)
This CPU seems to be the sh*t so far... 2.7GHz @ 1.38v primestable for about an hour, after that it completely froze though... Haven't had any A64 CPU *freeze* on me because of instability, only reboot, bluescreen or simply error in prime95, so I'm not giving up on this yet.
Anyway, 2.7 should be easy now :D
yay broke my personal best 16M and 32M times
http://www.fileshosts.com/DFI/NF4_SL...16m_twk_tn.jpg
http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.jpg
3000+ LBBLE 0516 GPAW
not fully stable but hey :D
yeah, happned to me, up vcore a bit, I went from 1.38v to 1.45v and it stopped freezing. Its strange it dosen't error out but just locks. :stick:Quote:
Originally Posted by exscape
it's own its way. will have it this weekend. just checking if anyone has any idea on this stepping. :cool:Quote:
Originally Posted by TEDY
This is my 2nd LBBLE 0517 DPMW... First one had batch ~900 and this one has ~300. First one could do 2.6G @ 1.46v, 2.7 not 100% stable even at 1.65v.
This one seems to be primestable @ 2.7, 1.41v.
If my point isn't clear; CPUs differ, a lot. I wouldn't be surprised if I got this baby to 2.8 stable.
i got a 3000+ Retail coming from newegg today, hoping for one of those 3 lucky numbers.. 12 / 15 / 17
redline 4000 and a dfi nf4 as well, ill be posting pictures real soon..
here is mine:
LBBLE 3200 0515FPBW batch0016 from Spain ;)
http://perso.wanadoo.es/dave_338/prime2650.JPG
If I up volts to 1,55 full temp goes too high and system crashes badly, seems that 53-54ºC is the maximum for overclocking this proc.
I'm trying tu push a little more with minimum voltage adjustment.
amd 3000 venice
ada3000daa4bp
cbble 0512dpbw
1229488c50073
http://users.telenet.be/duploxxx/oc/...9%20166dev.JPG
on air 2963 @1,58-1,6vcore bench stable will try a bit above 1,6vcore thats the max i will try
duploxxx
Guys, need to know what you think, I've lined up a buyer for my 0516 EPKW. I called a local shop, they have one 3000+ Venice left in stock, and it's an LBBLE 0517APJW. I haven't seen an APJW, but the rest of it (APxW) under the 0517 date seems to be leading to VERY nice overclockers...should I be able to expect nice results out of this thing? I need to know ASAP, i'll probly do it, but I've got high hopes already for this thing.
you won't know until u try it.. most 0517 is already good.. even with a good stepping like xPMW or so u might still get average clocks.. i have 3 and only 2 are really good
one doing 3ghz one doing 2.95ghz one only 2.8+ghz
all 0517 DPMW