SuperPi32m 5GHz & 4GHz Haswell All Out Challenge!

Printable View

Show 100 post(s) from this thread on one page

08-27-2013, 04:20 AM
l0ud_sil3nc3

testing a new cpu, seems to have strong IMC:

trcd 9 again?

http://i.imgur.com/QLl7oeM.png

still have to sort out temps for the above.

quickie aida run, no semblance of 32m stability with this one:p:

http://i.imgur.com/ckmhyUw.png
08-27-2013, 01:07 PM
Tommi_Vercetti

As a newbie of SuperPi 32M, here's my first trial @ 4GHz with my original Samsung DH0-CH9 ram.

Tommi_Vercetti- 7:31:156 - 40x100 - 1333.00MHz - 9-12-12-15-108-1 - ASROCK Z87M-OCF - Samsung Original DH0-CH9 4GB x2/SAMSUNG HCH9 - 2.15v - CPU H2O/RAM AIR

http://i.imgur.com/x1FwmaQ.jpg

http://i.imgur.com/5xXTck3.png

Cheers!
Tommi_Vercetti
08-27-2013, 01:46 PM
Splave

good start
08-27-2013, 02:19 PM
Splave

damn might have some potential here
http://i.imgur.com/ZqzXXVk.jpg

no wazza, and not nearly tightened out all the way. was just going to play valids and get out of my comfort zone a bit and had some fun. Realized that the spreaders had popped off the outside on both sides. now that they are naked I will throw some better sinks on and try again :) maybe 5m57 hynixxxxx
08-29-2013, 02:30 PM
C-N

Got a new chip for my UD5H to build up a new workstation but it looked good so swapped it out to the OCF!!

Early days but it runs like a champ :)

http://i106.photobucket.com/albums/m...87/5m57578.png
08-29-2013, 02:42 PM
Dumo

Awesome chip C-N:up:

5G/5G uncore with ambient temp.
08-29-2013, 02:42 PM
Splave

Beauty!
08-29-2013, 11:37 PM
C-N

Quote:

Originally Posted by Dumo

Awesome chip C-N:up: 5G/5G uncore with ambient temp.

Thanks mate, I was just very lucky. Silicone never fails to amaze me!!

Quote:

Originally Posted by Splave

Beauty!

She's a keeper :)

Small update / pre work run!!!

C-N- 5:57:500 - 49x102 - 1430MHz 9-12-12-16-108-1 - Asrock Z87 OCF/AC - Corsair 2666 C10 2x4GB/Samsung HCH9 - 2.0265v - CPU Water Kuhler 920 / Ram Air

http://i106.photobucket.com/albums/m...8605M57500.png
08-30-2013, 02:12 AM
l0ud_sil3nc3

l0ud_sil3nc3 - 7:23:938 - 39x102.6 - 1504.2 MHz - 11-14-13-24-266-1T - Z87M OCF - Corsair 3000 2x4GB/MFR - 1.85v - air@all

http://i.imgur.com/xGGXw1S.png

l0ud_sil3nc3 - 6:01:859 - 48x104.2 - 1527.8 MHz - 11-14-13-24-266-1T - Z87M OCF - Corsair 3000 2x4GB/MFR - 1.85v - air@all

http://i.imgur.com/cjJhjao.png
08-30-2013, 04:00 AM
THERULE

RULE- 5:57.922 - 48x104.2 - 1354.1 MHz - 7-11-7-24-74-1 - AsRock Z87 OCF-M - GSkill Pi 2200mhz C7 /PSC - 2.25V - LN2 CPU/Mem

http://imageshack.us/a/img835/4871/v25.PNG

http://img802.imageshack.us/img802/7564/tpyb.jpg

http://img854.imageshack.us/img854/7706/8uut.jpg

http://imageshack.us/a/img829/4599/30q0.jpg

First time memory under LN2, some instability below -90?C, close 5.57.500 but the screen is incorrect.
Try again this week-end.
08-30-2013, 11:30 AM
l0ud_sil3nc3

l0ud_sil3nc3 - 6:01:563 - 48x104.2 - 1527.8 MHz - 11-14-13-24-266-1T - Z87M OCF - Corsair 3000 2x4GB/MFR - 1.85v - air@all

http://i.imgur.com/6sHj89x.png
08-31-2013, 09:19 AM
Splave

Guess I need to run mfr again bastage!

maybe this stick (1.65v) and its brother (only does 1767 lmao)
http://i.imgur.com/zOkbq2k.jpg
09-01-2013, 11:15 AM
THERULE

RULE - 5:57:422 - 48x104.2 - 1355.8 MHz - 7-11-7-24-72-1T - Z87M OCF - G.SKILL PI 2x2GB/PSC - 2.269v - LN2@ALL

http://img826.imageshack.us/img826/7467/snwz.png

http://imageshack.us/a/img843/7210/5ydc.jpg

http://imageshack.us/a/img197/3906/ilvi.JPG

http://imageshack.us/a/img28/3861/6xny.jpg

Very hard to get this with 66% humidity

http://img46.imageshack.us/img46/213...pgaftbeibu.mp4

Enjoy!
09-01-2013, 11:29 AM
l0ud_sil3nc3

Quote:

Originally Posted by THERULE

RULE - 5:57:422 - 48x104.2 - 1355.8 MHz - 7-11-7-24-72-1T - Z87M OCF - G.SKILL PI 2x2GB/PSC - 2.269v - LN2@ALL

Very hard to get this with 66% humidity

http://img46.imageshack.us/img46/213...pgaftbeibu.mp4

Enjoy!

Great run:up:

Do you have any fans redirecting the cold away from the mb?
09-01-2013, 11:38 AM
THERULE

usually yes, not this time.
With very wet air there is a lot of condenses, so I tried to cover everything with a lot of blue paper.
Next time a water proof board will be better!
09-01-2013, 11:43 AM
Mafio

Quote:

Originally Posted by THERULE

RULE - 5:57:422 - 48x104.2 - 1355.8 MHz - 7-11-7-24-72-1T - Z87M OCF - G.SKILL PI 2x2GB/PSC - 2.269v - LN2@ALL

http://img826.imageshack.us/img826/7467/snwz.png

http://imageshack.us/a/img843/7210/5ydc.jpg

http://imageshack.us/a/img197/3906/ilvi.JPG

http://imageshack.us/a/img28/3861/6xny.jpg

Very hard to get this with 66% humidity

http://img46.imageshack.us/img46/213...pgaftbeibu.mp4

Enjoy!

Holy s**t, 2.25 volt. :D
Keep up the good work.
09-01-2013, 12:03 PM
THERULE

you know it's all because of you, i learned from the best!
Thanks Fabio and come back to bench please!
09-01-2013, 08:30 PM
l0ud_sil3nc3

same cpu from the prior session starting the night off well:

http://i.imgur.com/e8q40wC.png

finally caught myself:)

http://i.imgur.com/o9D9fGz.png

getting closer. . .

l0ud_sil3nc3 - 5:55:672 - 49x102.1 - 1361 MHz - 6-10-6-24-64-1 - OCF - GSkill 2400 c8 2x2GB/PSC - 2.15V - LN2 @ all

http://i.imgur.com/qsDl4Ls.png

and FAIL:p:

http://i.imgur.com/f4O9PgC.png

sooooo close yet so far will keep going till I run out of juice since I will be out of town for most of the week which means no bench time:(
09-01-2013, 08:53 PM
bullant

Really nice Loud,maybe was a 55.4--

Little improvement,should have some ln2 soon,been to long without it
bullant - 7:20.625 - 39x102.61 - 1368.3MHz - 8-12-8-28-82-1 - OCF - GSkill Pis 2x2GB/PSC - 1.935V -CPU-25,Memory AIR
http://s23.postimg.org/c0e58t5kr/iopx2.png
09-02-2013, 06:48 AM
Splave

great runs all around :)
09-04-2013, 03:59 AM
John Lam

2 Attachment(s)

John Lam - 5:58.484 - 50x100 - 1400.0MHz - 9-12-12-15-108-1 - OCF - CORSAIR - 1.98V All AIR

i-RAM x 2

Attachment 131216
Attachment 131215
09-04-2013, 09:54 AM
MaJ0r

John what boost gave you I-ram? And I see you use Vista style theme from desctop it's new idea for 32m or I miss something//
09-04-2013, 04:00 PM
John Lam

Quote:

Originally Posted by MaJ0r

John what boost gave you I-ram? And I see you use Vista style theme from desctop it's new idea for 32m or I miss something//

This is Offical Luna Theme from Microsoft Called "Zune", I ported from WinFLP OS , No TrueType Font used , only 1M memory used.

http://en.wikipedia.org/wiki/Windows_XP_themes

iRam has very fast transfer rate in 4K , extreme fast access time, doesn't slow down over time , and Unlimited write cycles compared to SSD if you always do Copy Wazza file.
09-06-2013, 01:20 PM
crustytheclown

Crusty - 7:17:891 - 40x100.6 - 1334MHz 7-9-6-20-62-1 - Asrock Z87 OCF - Skillz 2133C8 2x2GB/BBSE - 1.91v - CPU SS / Ram LN2

http://imageshack.us/a/img546/9697/bxec.jpg

New os new manual bat-style wazza :D

previus run with slightly slacker timings,the big difference is because of ocx tweaker,no affinity-priority... almost 1 sec slower...

http://imageshack.us/a/img13/8205/pd67.jpg

and some pics of the session

http://imageshack.us/a/img22/2655/89d7.jpg

the reason i did not test 5g at all...next time...

http://imageshack.us/a/img153/9347/euxh.jpg

and some psc sticks to test... hopefully something good will come out

http://imageshack.us/a/img22/2558/tt5e.jpg
09-06-2013, 02:01 PM
MaJ0r

Crusty want to see 5GHz time, will show us it )
09-06-2013, 04:21 PM
bullant

Awesome time Crusty,
Had a little play today,wasn't the best session Ive had,corrupting my OS and waza setup.How ever was playing with tRCD 9 and some nice Mhz,will keep testing :up:
http://s9.postimg.org/ora7zgnun/ghb.png
09-07-2013, 03:14 AM
crustytheclown

tha fact that you can even train your memory THAT high-tight is freaking me out...
09-07-2013, 09:22 AM
hiwa

nice run crusty and nice memories bullant
09-07-2013, 12:04 PM
Splave

Started benching this morning....couldnt get cpu to run 5ghz 1.45v on SS :P so forced to kick down to 4ghz...Glad I did :P

This got me excited :P
http://i.imgur.com/f8Gjwj3.jpg

But this made it so worth the last 2 months of trying. 3-5 sessions a week :O

Splave - 7:17:188 - 31x129 - 1376MHz - 6-10-6-21-68-1 - ASRock z87 OCF - G.Skill 2400mhz 2x2GB/PSC - 2.28v - SS / Ln2
http://i.imgur.com/Uug5sGi.jpg

http://i.imgur.com/Jxa7dDc.jpg

http://i.imgur.com/eGgbXNO.jpg

http://i.imgur.com/RkUWT5c.jpg

http://i.imgur.com/c8BPLN0.jpg

http://i.imgur.com/arg1myG.jpg

2400 c8 pi on double copper pcb, no CB and scale to 2.28vdimm :) monster sticks, try again on better cpu then run 5ghz as well.
09-07-2013, 12:31 PM
hiwa

Nice with 8155 again :D
09-07-2013, 12:35 PM
websmile

Did you get the sticks with this spd or did you flash custom SPD?
09-07-2013, 01:02 PM
Splave

They have 2600 Xmp on them as we'll ;)
09-07-2013, 01:04 PM
TaPaKaH

my retail kit doesn't, so I guess it's custom
good score! :)
09-07-2013, 01:35 PM
bullant

Awesome Splave,was wondering when you would post something.
09-07-2013, 02:30 PM
Don_Dan

Awesome run, Splave! :up:

https://i.chzbgr.com/maxW500/7132846592/h50E73BBF/

PS: Sorry for the delay, I'll make an update of the first post next week.
09-07-2013, 10:14 PM
XBrytanX

XBrytanX -7:19:297 - 40x100.01 - 1300 MHz - 6-10-6-24-64-1T - Asus Impact - Gskill 2000 (PSC) - 2x2gb - 2.100v - h2o/LN2 -115
retail HS/bad efficiency since this is testing OS
http://imageshack.us/a/img51/7491/z3pa.jpg
http://imageshack.us/a/img196/1066/jf9u.jpg
http://imageshack.us/a/img32/2016/f2p4.jpg
09-07-2013, 10:42 PM
crustytheclown

Nailed it Splavor.... Amazing run!!!:eek:
09-08-2013, 05:19 AM
Splave

Thanks wish I had good bbse like you bro.
09-08-2013, 05:28 AM
bullant

Had another go today,did have some nice runs but corrupt OS again.Will sort it out and hopefully get something to stick,this was just pushing mems :up:
http://s14.postimg.org/mfx6vxpap/x18.png
09-08-2013, 12:28 PM
Splave

Wtf? Lol killing it
09-08-2013, 11:31 PM
Alex-Ro

holy cow,the bull-ant is back :)
09-09-2013, 12:46 AM
hicookie

HiCookie 5:57:328 - 48x104.2 - 1459.1MHz 9-12-12-17-112-1 - GIGABYTE Z87X-OC - Corsair 2666 C10 2x4GB(Samsung) - 2.3v - Air/Air

http://img4.imagetitan.com/img4/small/8/8_557.jpg
09-09-2013, 03:54 AM
hicookie

HiCookie 5:56:640 - 47x106.4 - 1489.7MHz 9-12-12-17-112-1 - GIGABYTE Z87X-OC - Corsair 2666 C10 2x4GB(Samsung) - 2.3v - Air/LN2

http://img4.imagetitan.com/img4/small/8/8_2980.jpg
09-09-2013, 06:47 AM
Splave

QE6S?

lol at aida read :) crazy bandwidth
09-09-2013, 01:58 PM
dinos22

Lol when one mobo tab is just not good enough
09-09-2013, 02:23 PM
hiwa

i am tiny but i know how to do it fast 5.57.453 Samsung at 2860 RTL rules. Maximus VI impact can run 42/42 4/4 holly :banana::banana::banana::banana:
http://img707.imageshack.us/img707/2127/u93l.jpg

Uploaded with ImageShack.us
http://img96.imageshack.us/img96/8643/un7x.jpg

Uploaded with ImageShack.us
09-10-2013, 10:36 AM
Splave

try some bbse today
http://i.imgur.com/xmacpqu.jpg
09-11-2013, 01:20 AM
crustytheclown

One hint for BBSE that may work,train with 0.78v vtddr but run with 0.75v.
On Ivy mine needed 1.92v optimal on haswell 1.89v-1.9v is the sweetspot
09-11-2013, 05:21 AM
Splave

seems this retail imc limit 6-9-7 2600 :( and needed 1.5vCache, maybe try again with qe6s today.
09-11-2013, 05:53 AM
crustytheclown

yeah cannot do cl6 with my bbse too no matter what,but can do 2720 7-9-6-22
09-11-2013, 06:24 AM
bullant

Not quite pass yet but starting to work it out,was only able to get to -140 tonight,will keep pushing :up:
Had a couple better runs then this one but this one did the most loops
http://s10.postimg.org/aab8ulo3d/close2.png
09-11-2013, 07:16 AM
Vivi

bullant the half pi master :D
09-11-2013, 10:02 AM
Splave

rocking it bro
09-11-2013, 04:01 PM
bullant

Quote:

Originally Posted by Vivi

bullant the half pi master :D

Ahah

Quote:

Originally Posted by Splave

rocking it bro

Thanks bro,starting to make some progress,it was one of those session that I learnt from it
09-12-2013, 10:34 AM
Tommi_Vercetti

As second run@SPI 32M, it's my personal best so far, could be better
Tommi_Vercetti- 6:04.765 - 50x100 - 1400.00MHz - 9-12-12-17-108-1 - ASROCK Z87-OCF - G.Skill 2600C10/SAMSUNG HCH9 - 2.15v - CPU H2O/RAM AIR

http://i.imgur.com/QrkMu3V.png

http://i.imgur.com/i6ECYFs.jpg
09-12-2013, 11:02 AM
Splave

^ try lower maxmem to 600 and move 30-31 copies of 01 D: to C: one time then run :) delete wahaha
09-12-2013, 12:57 PM
hiwa

what SPLVE said +change wcl to 6
09-12-2013, 07:43 PM
bullant

So im currently benching now,starting off pretty good had few better then this but its a start :up:
bullant - 5:55.890 - 49x102.7 - 1361MHz - 6-9-6-24-64-1 - OCF - GSkill Pis 2x2GB/PSC - 2.18V -CPU-25,Memory Ln2 -140
http://s21.postimg.org/dbewxlnrb/fyu.png
http://s8.postimg.org/w9tbkan79/DSCN7808.jpg
09-13-2013, 01:25 AM
l0ud_sil3nc3

TRCD 9 is soo much win!

Great job Bull:D
09-13-2013, 01:51 AM
hiwa

nice one Bullant
more runs and more CW playing = 55.5XX
09-13-2013, 02:09 AM
bullant

Quote:

Originally Posted by l0ud_sil3nc3

TRCD 9 is soo much win!

Great job Bull:D

Thanks Loud

Quote:

Originally Posted by hiwa

nice one Bullant
more runs and more CW playing = 55.5XX

Thanks hiwa,yeah had few better runs but they failed.I'll keep trying and playing with waza more like you said because you are correct.
Thanks
09-15-2013, 03:23 AM
l0ud_sil3nc3

l0ud_sil3nc3 - 7:19:453 - 39x102.6 - 1436.7 MHz - 9-12-12-16-108-1 - Z87M OCF - Corsair 2666 c10 2x4GB/HCH9 - 2.04v - air @ all

http://i.imgur.com/kiHYgLj.png

this kit looks promising to say the least:cheer2:

Will try to get in to the 18's on ambient temps but a touch of cold might be necessary.
09-15-2013, 04:59 AM
XBrytanX

XBrytanX - 5:56:938 - 50x100 - 1333.0MHz - 7-10-6-22-80-1 - Asus MVI Impact - G.Skill 2200 c9 2x2gb/BBSE- 2.04v - LN2/LN2

http://imageshack.us/a/img571/9089/ax1w.png

40x100 -7:19.047

http://imageshack.us/a/img5/9215/p3x8.png http://imageshack.us/a/img707/5928/z00o.jpg
09-15-2013, 05:58 AM
TaPaKaH

are these my ex kit?
09-15-2013, 01:03 PM
XBrytanX

yes
09-16-2013, 05:38 PM
StrategosSan

Hi guys!

First touch with Haswell, seems to be not that good, might have issue with my efficiency. Will try later.
I had few better run in 5m57.xxx but guess what, not exact in a round :D
http://img822.imageshack.us/img822/953/shq0.jpg

PS : no RAMdisk
09-16-2013, 11:34 PM
bullant

Got it guys :)
bullant - 5:55.485 - 50x100.6 - 1400MHz - 6-10-6-26-70-1 - OCF - GSkill Pis 2x2GB/PSC - 2.18V -CPU-25,Memory Ln2 -160
http://s11.postimg.org/jugmsrxgj/fhj.png

Here is another one i did guys 55.500 with tRFC 64 fast start but it faded away,maybe bad waza or windows was getting corrupt
I have a video on my iphone of this run if i ever work out how to upload it I will :up:
http://s21.postimg.org/5rjg12cif/ert.png

Here is one that was tRfC 68 tRAS 24 that was -78s faster then my best run at loop 15
http://s21.postimg.org/b9c1ov7pz/199.png
http://s17.postimg.org/qs6qjs65b/DSCN7824.jpg
09-16-2013, 11:40 PM
MaJ0r

bullant what a great kit did you use? 2400 CL8? Awesome memory clock and timings!
09-16-2013, 11:42 PM
bullant

Quote:

Originally Posted by MaJ0r

bullant what a great kit did you use? 2400 CL8? Awesome memory clock and timings!

Thanks Major,G skill Pis 2000 cl6
09-16-2013, 11:53 PM
MaJ0r

Quote:

Originally Posted by bullant

Thanks Major,G skill Pis 2000 cl6

Cool I've got the same kit, maybe I'll be lucky too )
09-17-2013, 02:02 AM
l0ud_sil3nc3

Wow 2800 c6, you are in no mans land!

I would have never guessed the 2800 divider would have worked so well.
09-17-2013, 02:34 AM
hiwa

Simply AWESOME run bullant.
09-17-2013, 02:54 AM
C-N

That is off the wall crazy man well done!
09-17-2013, 03:56 AM
Leeghoofd

Crazy run Bullant, nice work. Congratz on top spot !
09-17-2013, 04:08 AM
TaPaKaH

Do you use IGPU for pi or you just removed the VGA for the picture?
09-17-2013, 04:12 AM
bullant

Quote:

Originally Posted by TaPaKaH

Do you use IGPU for pi or you just removed the VGA for the picture?

Hey Sam, I use a VGA I just removed it for pic its a gtx 480 the only card i have to use and its a bit big in pic so I removed it

Thanks for the kind words guys :up:
09-17-2013, 06:21 AM
Vivi

sick stuff!!

keep owning it
09-17-2013, 07:00 AM
XBrytanX

they do like cold no doubt,simply the best Usain !
09-17-2013, 12:32 PM
Splave

hey bull 8155?
09-17-2013, 02:14 PM
l0ud_sil3nc3

l0ud_sil3nc3 - 7:19:234- 33x121.3 - 1455.3MHz - 9-12-12-21-108-1 - Z87M OCF - Corsair 2666 c10 2x4GB/HCH9 - 2.09v - air @ all

http://i.imgur.com/t7oRGD1.png
09-17-2013, 02:52 PM
bullant

Quote:

Originally Posted by Splave

hey bull 8155?

Yeah they are mate
That first run I did was on the first lrt off ln2

Nice run loud,this the same kit or next 4 dims?
09-17-2013, 09:02 PM
l0ud_sil3nc3

Quote:

Originally Posted by bullant

Yeah they are mate
That first run I did was on the first lrt off ln2

Nice run loud,this the same kit or next 4 dims?

Still the same ones from the prior sub, going to be giving some PSC a spin tomorrow on X79 on a certain Black board:D

http://i.imgur.com/tbNnirk.jpg
09-17-2013, 11:18 PM
bullant

Hey guys this is the video clip of that 55.500 run I said that I would post :up:
http://www.youtube.com/watch?v=PQQWP...ature=youtu.be
http://s2.postimg.org/8f4cll2wp/ert.png
09-17-2013, 11:19 PM
MaJ0r

Guys I need a help. Which BIOS is the best for AsRock Z87 OC Formula and SuperPi 32m? I see you use different BIOSes, maybe it depends on sort of memory or so...
09-17-2013, 11:31 PM
bullant

Quote:

Originally Posted by MaJ0r

Guys I need a help. Which BIOS is the best for AsRock Z87 OC Formula and SuperPi 32m? I see you use different BIOSes, maybe it depends on sort of memory or so...

Hey MaJor,ive really only tested the one im on now and it seems good but i notice loud was on 1.50 and think it was 1.52,maybe start with those ones first and see how they go.I have only used PSC tho
09-18-2013, 12:33 AM
MaJ0r

I have one more question. Does AsRock Formula Drive work at WinXP SP3 x32?
09-18-2013, 12:43 AM
bullant

Yeah MaJor it does it's what I use the lite one,I just install the intel ME driver so blk will work
09-18-2013, 01:04 AM
MaJ0r

Quote:

Originally Posted by bullant

Yeah MaJor it does it's what I use the lite one,I just install the intel ME driver so blk will work

The lite one, What did you meant? I have some issue with Formula drive
http://i.imgur.com/m0rPkpv.png but as you can see I have this library in my system. Intel ME driver installed and its service is working. May be I have to check other services but I have no idea about them.
09-18-2013, 01:18 AM
bullant

There is a lite version of formula drive,will be on first page of Splave thread
Also some updates here http://forum.hwbot.org/showthread.php?t=75024
09-18-2013, 01:24 AM
MaJ0r

Quote:

Originally Posted by bullant

There is a lite version of formula drive,will be on first page of Splave thread

Thanks, found it.
09-18-2013, 01:39 AM
MaJ0r

Quote:

Originally Posted by MaJ0r

Thanks, found it.

But it didn't help me. In process of installation I saw error HDMISwith.exe and the same library not found
09-18-2013, 01:51 AM
bullant

Quote:

Originally Posted by MaJ0r

But it didn't help me. In process of installation I saw error HDMISwith.exe and the same library not found

Once you install windows all those items should install no problem,the me driver is just to make blck work on formula drive,did you turn any services off after you installed windows to make the error
09-18-2013, 02:14 AM
MaJ0r

Quote:

Originally Posted by bullant

Once you install windows all those items should install no problem,the me driver is just to make blck work on formula drive,did you turn any services off after you installed windows to make the error

I don't know how but lite version is working fine, thanks )
09-18-2013, 05:08 AM
Splave

nice kit on FB major, time for coooooold :}
09-18-2013, 07:02 AM
MaJ0r

Quote:

Originally Posted by Splave

nice kit on FB major, time for coooooold :}

Need to figure out how to overclock Haswell on air before
Thanks. First touch of Haswell and AsRock ))
MaJ0r - 7:24.657 - 40x100 - 1333MHz - 8-12-8-28-88-1 - OCF - GSkill Pis 2x2GB/PSC - 1,93 -CPU-air,Memory-air
http://i.piccy.info/i7/5a0222eaf7a57...ot0018_800.jpg http://i.piccy.info/a3/2013-09-18-15...00x500-r/i.gif
Just set Nick profile PSC 2600 tight and changed memory divider. Have to find good timings and Waza.
Tried to find max clock
http://i.piccy.info/i8/61f4a4870d830...ot0017_500.jpg http://i.piccy.info/a3/2013-09-19-20...00x313-r/i.gif
09-18-2013, 12:10 PM
Tommi_Vercetti

Finally able to run SPI32M at decent result, thanks Splave, Hiva and John Lam for the tips.

Tommi_Vercetti - 7:23.078 - 40x100 - 1400.00MHz - 9-12-12-17-108-1 - ASROCK Z87-OCF - G.Skill 2600C10 4GB x2 - 2.15v - CPU H2O/RAM AIR
http://i.imgur.com/IxvtoXa.jpg

Tommi_Vercetti - 6:00.579 - 50x100 - 1400.00MHz - 9-12-12-17-107-1 - ASROCK Z87-OCF - G.Skill 2600C10 4GB x2- 2.15v - CPU H2O/RAM AIR
http://i.imgur.com/2HbIcNz.jpg
09-18-2013, 01:07 PM
mikecdm

Quote:

Originally Posted by MaJ0r

But it didn't help me. In process of installation I saw error HDMISwith.exe and the same library not found

I have had that pop up recently when switching an OS between different boards, one of which was an MSI. The rapid OC gave me that error, but the formula drive lite works just fine. I've never had an issue when installing a fresh OS on the asrocker.
09-18-2013, 01:26 PM
MaJ0r

Quote:

Originally Posted by mikecdm

I have had that pop up recently when switching an OS between different boards, one of which was an MSI. The rapid OC gave me that error, but the formula drive lite works just fine. I've never had an issue when installing a fresh OS on the asrocker.

Yes, you're right I changed the board from Asus Maximus V Extreme to AsRock. I installed fresh OS when I participated in Asus OOC 2013 but it didn't give me any boost to compare with old OS which saw a lot of platform ) So I'm too lazy to install new WinXP SP3, may be I'll do it if I'll be close to some WR )))
09-18-2013, 02:54 PM
bullant

Very nice start MaJor,always a good idea to have a fresh OS it will help with your stability
09-19-2013, 11:45 AM
l0ud_sil3nc3

I guess it is my turn to be the half pi master:p:

Time to switch cpu's back to the non wounded one and give it a spin in a day or two.

http://i.imgur.com/ZiWRYhT.png

fail 4G:confused:

l0ud_sil3nc3 - 7:17:938- 39x102.6 - 1367.4MHz - 6-10-6-24-64-1 - Z87 OCF - G.Skill 2400 c8 2x2GB/PSC - 2.15v - LN2 @ all

http://i.imgur.com/rYrCe19.png

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 04:02 AM.

XtremeSystems