+1 on the availability. Hopefully they will show up soon. I canceled an order a while ago and now I can't find one.Quote:
Originally Posted by systemviper
Printable View
+1 on the availability. Hopefully they will show up soon. I canceled an order a while ago and now I can't find one.Quote:
Originally Posted by systemviper
Not much life in this tread enymore ??? :-(
I was beginning to wondering that... everyone seems to have stopped replying!
Perhaps they have other things to work on and do ? :)
Are you working on anything interesting Bench? or did you mean 'work work' (of the boring kind you have to do to pay bills) rather than 'testing exciting components' work.... ;)
I'm currently working on the BloodRage review, and also working on other computers ( that's my job :D ) as well.
Hopefully I'll get the review ready & published by the end of the following week :)
p.s. We shall have a new BIOS for the BloodRage in a few days ( perhaps this Tuesday )
Hey Guys!! I'm stuck doing the kind of work which pays the bills.:mad: All I can do is read your posts on a very slow connection and dream of when I finally get home and can have a go!!! Trouble is, I probably do more at home than at work!!!:rofl::rofl: (when you build a house you are never done!!)
I found the board at Alternate.be, & snagged it!! They also had the OCZ 6gig Blade kit (2000 @ 7-8-7-20) listed cheaper than anywhere else in Europe and ordered that as well.:D (they have since raised the price but its still listed at Alternate.nl cheaper!!) :fact: I believe this has the same Elpida as the Corsair Dom GT. I'm now waiting for the Rev D cpus to come out. I'm also waiting for Sh0ck to post his results with that Heatkiller 3.0 WB. It not only looks great but seems to be getting some good press...but my German is terrible!! Good to hear a new bios is coming out..seems that the latest one fixed some memory compatibility issues, I believe Tripgood now has his Corsair Dom GT's running at full speed!! So, things might of slowed down but interest level is still high on this end....:)
PS Looking forward to your review BenchZowner!!!
Is the bios a beta or official release? Anyhoo, the board is working very well for me and 19a took care of the cas7, cold boot and higher vtt settings functionality I was having. Can't wait for the new stepping chips to see what she can do!:up:Quote:
Originally Posted by BenchZowner
New beta ( G series ) not "stable" ( P series )
Nice one bench... lookin fwd to reading your reveiw, and the bios of course!Quote:
Originally Posted by BenchZowner
Ik hope it will solve the X21 to X20 multi drop :cool:Quote:
Originally Posted by BenchZowner
for the rest the board is verry good :up:
My X58 motherboard round-up has been up for a few days now (www.madshrimps.be) :-)
Does anyone else have issues with the 29x multiplier?
ordered from ebay10 days ago,they send me an email today if i want my money back back :mad::mad:
Hey Massman,
Cool dat er hier nog Belgen zitten ook :up:
Nice to have some Belgium friends here lol :up:
what is the best bios to be using right now and where can I get it. I cant recall where I saw a link to the bios's Thanks
Will this bios work with D0 ?
I´ve heard a new bios is needed for this stepping.
Care to read the previous page ?Quote:
Originally Posted by INFRNL
If not... well... I'll give you the address one more time
BloodRage BIOS repository
Use G13 or P04.
When the D0 stepping gets released Foxconn will have a BIOS with the new stepping's microcode, no need to worry about CPU support.Quote:
Originally Posted by Sch0cK
Quote:
Originally Posted by BenchZowner
LOL, thanks Bzowner. also your linky doesnt work. I found them both though. found g13 somewhere else and found P04 a page or so back.
Anyone know where to get one statside? eveyone seems to be OOS. Have received some replies from vendors that are saying that it is FOXCONN that is not filling the orders.
Quote:
Originally Posted by INFRNL
Sorry forgot a directory :D
Here's the correct link ( I'm adding every new BIOS as soon as it's out )
Foxconn BloodRage BIOSes
NewEgg should have some in stock this week.Quote:
Originally Posted by Alphamale
Are there issues with G19a that I haven't seen mentioned? It's been pretty well-behaved for me so far.Quote:
Originally Posted by BenchZowner
The P04 seems to be a bit better.Quote:
Originally Posted by MpG
Just that.
My personal recommendation is G13 or P04 if you're having any problems with G13 ( the PSU compatibility issues for example ).
g19 is working well but my multiplyer is dropping on p04 and p05.I dentical bios settings ppm disabled
http://img4.imageshack.us/img4/9343/g19a.jpg
http://img26.imageshack.us/img26/7886/p04andp05.jpg
I am just curious at why you (rwoodburn1) are putting so much voltage through your chip for the amount of overclock you are doing? Shouldn't you be around 1.45v vcore?
Thanks.
Yea its not the greatest chip retail from the egg:) Vdroop is also giving more than what I set it at.Quote:
Originally Posted by Utnorris
Still waiting on the NON droopable multipplayer bios :-(
its back in "stock" at ewiz for 255. assuming u trust them to actually have it
310 at NewEgg as well. It feels like forever since anybody has had them in stock in the U.S.Quote:
Originally Posted by i7luver
its probably the current reading, get P06 and use the turbo always on setting, the current reading is circumvented/fooled by hardware now :DQuote:
Originally Posted by rwoodburn1
itll still have EIST, and disabling doesnt work in bios atm, but just set the power management profile to performance/always on in windows and it wont drop
pm me your email address and ill mail it to you :)
same as above, pm me your email address and ill add you to the bios mailing list :toast:Quote:
Originally Posted by M.I.K.E.Y
sorry it took a bit to trick the current reading of i7, we adjusted it on the board already and thought its enough but if you push high vcore its still limiting at some point. like i said, P06 enables a hardware workaround to fool i7s current feedback :)
good to hear boards are in stock again, yeah it really was a while :D
if you guys need anything else drop me a pm :)
oh and please check out the foxconn section here on xs and vote in the polls in the suggestion box subsection!
I need your feedback about what features you want to see on future boards :D
Ive yet to power up my i7 system, but using Turbo mode sounds good after all (I actually didnt want to use it). But, if you set performance mode in Windows and use anything non-multithreaded, will all cores remain at the same multiplier? So say Ive a 20x multi, with Turbo that would be 21x on all cores. But there's this thing that if you've a single threaded app all cores will stay at 20x and the main core will be 22x instead right? Is there a way to prevent that from happening?Quote:
Originally Posted by saaya
Anyway, Im happy with my Bloodrage. Didnt even fire it up yet, but Im already in love:cool:
I hope I wont get dissapointed like I got with DFI's AM2 boards, that was ridiculous:shakes: Installed my waterblock with backplate, high force:devil: Installing fan on north bridge was... well, harder than expected. Not hard though, but my two last cooling solutions were a TRUE and TR IFX-14+IFX-10 combo, if you survive that you can survive anything:p:
I updated the FTP with more BIOSes and working on adding release notes & change list per BIOS now ;)
Here's the address once again :p:
Just fired her up, awesome:cool:
Running BIOS just for like 30minutes, will note down default Voltages.
Thus far idle temp is only 23C, then again... EK Supreme + TFC X-Changer 480mm (yes that's only in the loop).
Thanks for posting p06 I gave it a try but I am still having the issue with the dropped multiplier set 29 and end up with 24 with latest cpuz.One of the good things is cpu turbo is now working for me at lower overclock and the voltage seems a little better.
Oh, guess Ive figured out how to prevent Turbo mode switching between 21*/21*/21*/21* to 22*/?*/?*?*, disabling CxE. I dont know sincew I didnt try it, installing Vista now. Can anyone confirm this though?
Yeah FOXCONN :eek: :clap: :up:
It holds the 21 Multi,even at high VCore.
Fantastic job and the best X58 Mainboard now :D
Here a picture,dont kidding,the VCore is only for a test ;)
http://www.abload.de/img/br21erel49.jpg
:rocker:
Indeed, very nice job Foxconn! This board is amazing. Im still testing but thus far it has been a very solid piece of w... art:up:
This is my first i7 system and have been using AMD for the past 7 years. So I didnt have a clear thought what Voltages to start with. I simply set Vcore +20mV, VTT +80mV, X58 IOH 1.12V and didnt have to change anything thus far:cool:
Then I set 160Mhz Blck and a RAM multi of 10 (since my RAM is made for that) and changed everything according to that while keeping the CPU around stock speed. All was set simple and fast without hick ups.
Then I changed CPU to 20x with Turbo enabled, no issues.
Changed to 180Mhz Blck, RAM back to 8x, VTT to 16x and QPI to 9:8 VTT, stable.
Set Blck to 191 (for the 'mighty 4Ghz'), already going for an hour. If this continues like this Ill end up maxing out the Bloodrage its self and having to test for lower Voltages:rofl:
Temps are only 47C/45C/45C/42C under full load!
Back to this board though, it's simply amazing. How easy things are changed, unbelievable. I didnt know I could expect this ever again from a motherboard after my DFI experience from 3 boards the past 1.5 year;
UT 790FX-M2R, digital PWM's were screaming and need a fan at stock to not let them reach 85C. BIOS is after 1.5 years still not bug free and incomplete.
DK 790FXB-M2RS, waited 4 months for arrival and then NB/HT MOSFET blew within a week with a marginal OC.
DK 790FXB-M2RSH, simply refused to boot.
Loads of other AM2+ boards had varying issues. Now Im just happy I took the i7 way because of the available boards for that platform, and it seems like I picked the right one to start with:cool:
Thanks for posting the new P06 bios - testing it now.
Just wanted to run a few things past you guys in the hope u might be able to give me a few pointers. Ive had the board 2 weeks now, and overall im really pleased with it. Its rock stable for starters. Anyhow, i have a few observations to make -
voltage
Vcore - i tend to get a reverse vdroop - when the CPU is under 100% load, the board increases the voltage, sometimes by quite a bit. e.g. at 1.33v it increase's to 1.344v when priming. Note, i have EIST/CxE etc turned off. Whats more interesting, is the amount it increases buy, changes depending on the multi I use. On my 965 for example at a 25 multi, it overvolts FAR more than at 23 multi. But at 21, it hardly overvolts at all. Has anyone else noticed anything likethis? Its not a deal breaker cos i can adjust the voltage in bios accordingly. BTW, I have measured with a DMM to check this wasnt just everest misreporting.
uncore Everst seems to read considerably higher voltage than DMM - the DMM is pretty much spot on vs. hardware monitor in bios. E.G. Everest reads 1.38v when DMM reads 1.33v from the pad. Also, I am after some guidance on what would be considered 'Safe' 24/7 uncore voltage. Ive been as high as 1.36v, is this still within the realms of everyday use?
Finally, just wanted some pointers with the overclock on my 965. I have 4ghz nice and stable at 1.33v, but i just cant get it any higher... maybe I have just hit a wall, but was wondering if there is a setting ive missed somewhere. Ive been up to 1.41v vcore so far (I know i can push higher as im on water, but it seems a big just from 1.33v @ 4ghz) 1.36v uncore, 1.30v NB, 1.88v QPI. Is there anything that can aid stability? this is at 179x23 btw.
Apologies for the long winded post, but some of you thoughts would be extremely useful! (oh, and im about to stick my 920 back in and try 21 multi now its fixed! ;) )
Ive been playing with Vdrop Control too. With +150mV I got this;
Enabled -> Idle 1.392V -> Load 1.424/1.44V
Disabled -> Idle 1.376V -> Load 1.392V
Seriously, in combination with the 'Enabling Vdrop Control might damage the board' warning in BIOS, WTF is the point of this feature to begin with:confused:
Anyway, testing at 4.3Ghz now, it's stable but at what Voltage is unknown yet:p: Somewhere between 1.392 and 1.44V:rolleyes: At least I know I ain't missing anything on the Vdrop Control part:ROTF:
Does anyone know if the Kingston 6GB HyperX DDR3 2000MHz will work on this board?
I have a big problem here!!! Last night I went to switch back to my 920 to test the 21 multi. Switched CPU's as normal, but the board wouldnt POST. Odd I thought. fiddled around with a few things, still nothing. At first I thought my 920 had gone, so I put the 965 back in... same problem (I had been running it 15 mins earlier no probs).
Basically all the lights/fans come on, but there is no code displayed on the code debug LCD. Ive tried everything now, I even put the batt discharge jumper accross overnight, with no power to the board. After reading Benchzowners error code post, I see its either no CPU detected, or an issue with power to the board. I find it VERY hard to believe both CPU's have busted, so I unplugged and plugged back in the ATX and 8pin connectors. Still no joy.
I thought perhaps the bios had screwed up, so i selected the 2nd one via the jumper on the board.
The only thing I can think of is this is a rev. 1.0 board, and i am using a 1.2kw PSU (thermaltake toughpower). Could it be something to do with this?
Does anyone have any thoughts to help before I RMA?
If it worked with that PSU before, then it's not a PSU related issue ( unless your PSU crapped out :p: )
Did you try removing all the power from the board ( 8pin EPS & 24pin ATX ) and remove the CMOS Battery for 15 minutes ?
Also PSU issues are fixed in later BIOS versions, doubt it's that tbh.
Thanks guys... had a feeling it wasnt. Just tried your suggestion bench, infact left the battery out for a couple of hrs as I had stuff to do. Didnt work though. Im gonna get the board out of my case tonight and get it on a bench to see what i can do. Really odd... dont understand why it would just stop like that! Just hope I can get hold of another one as they are pretty hard to get hold of right now.
Hmmm, guess Im seeing the possible benefits from having Vdrop Control enabled, with +200mV and Vdrop disabled, Vcore seems to vary from 1.392V/1.408V to 1.424V (CPU-Z):rolleyes: Now that cant be a good thing for reliable OC testing:p:Quote:
Originally Posted by Rammsteiner
Anyone try a SAS drive with this board? Just curious how the performance is.
Marvel Controller:Quote:
Originally Posted by Utnorris
http://www.chawks2.com/images/Puter/...D0.Marvell.jpg
Intel Controller:
http://www.chawks2.com/images/Puter/...C.Intel.01.jpg
Curious what drives were being compared? Was it a pair of SAS vs. a pair of SATA's?
Thanks
is there way to not allow turbo mode to change the multiplier so much? i disable the CxE, enable ppm and Eist. but it seem jumping between mult 20-21, i heard i7 920 doesn't like even mult?
So. I finally got off being busy... I need help getting to 4.0ghz!
I have the g13 bios... Pry gonna need some help with ram timings and volts. And let me know what I need to type up for you guys.
Directions/pointers appreciated.
I think the issue is that the I7 920's do not like even multi's in the bios. I run 200x19 with HT and turbo enabled and it puts my multi at 21. Of course this is on my current EVGA and I have not gotten my BR yet to try it. Hopefully on Tuesday I will get it and be able to get set up.Quote:
Originally Posted by s002wjh
Set CPU Turbo to Always On instead of Enabled and disabling EIST might help as well.Quote:
Originally Posted by s002wjh
EIST Enabled
CxE Disabled
Turbo Mode set to Always On
it seem when i put bclk 200, vcore +100mv, set mult=19, CxE disable, everything else enable, turbo always on, it always set to multi 20, but never 21. ne1 know whats the deal here?
k ill try disable EIST, see if it help
It's normal.Quote:
Originally Posted by s002wjh
Turbo sets the multi 1 time higher when in load and you're using more than 1 cores.
To use the 2nd step over you need to disable HT and enable & use one core only
Noob question incoming... get your facepalms ready
What is EIST? (is it speed step? is it needed to use turbo mode?)
My Bloodrage comes in on Thursday and I am prepping myself for the project and this has me confused.
Ok I'm done witht he noob questions back to reading. I'm in information overload and alot of these terms are basically a foreign language to me coming from an AMD rig.
Thanks!
yes it is speedstep, i don't know if its needed for turbo on the bloodrage tho, some boards need it, some don't
I thought you wanted to disable everything under CPU features except for turbo and possibly HT. I know on my EVGA that is what is recommended to get the best overclock. Does enabling EIST allow the turbo function to work properly and does this mean disabling EIST in effect disables Turbo mode?
actually the turbo+2 mode doesnt kick the other cores back to normal, they stay in turbo+1 mode, so at 21 for a 920 that booted with 20 multiplier.Quote:
Originally Posted by Rammsteiner
haha, glad you like it :D :toast:Quote:
Originally Posted by Rammsteiner
yeah not exactly plug and play solutions... i really like zalmans mounting system, though the best would be something like the original 754/939 mounting system! hook it in on one side and then pull the lever and hook the level in on the other side... mounting and unmounting the heatsink was a thing of seconds and didnt require any force at all... would be awesome if something like this would exist for tower heatsinks or waterblocks!Quote:
Originally Posted by Rammsteiner
schweeeet! thanks bill! :toast:Quote:
Originally Posted by BenchZowner
thats odd... what temperature are you at? current is def not throttling the cpu multi with p06 so it must be temperature...Quote:
Originally Posted by rwoodburn1
just to be sure, can you change the tdp tdc settings in the cpu feature menu to see if that helps? set it to 2000 both, or maybe 3000, that should work in case current is throttling the cpu.
glad your happy with it :DQuote:
Originally Posted by jooney
thats very nice... really very nice... congrats! :toast:Quote:
Originally Posted by Rammsteiner
glad you like it :toast:Quote:
Originally Posted by Rammsteiner
if you want anything in bios changed let me know or post in the thread in the foxconn suggestion box section here on xs :)
hmmm if eist is turned off you shouldnt be able to use a 25 multiplier... are you sure its turned off? and are you sure CxE is turned off? tried the vdroop setting?Quote:
Originally Posted by MikeMK
can you tell me what vcore is like in idle and under load for the different multis using the same vcore setting? thanks! :toast:
yes, the onboard monitor reads vtt much too high since it reads it inside the vtt pwm... once it reaches the cpu its actually up to .1v lower depending on the load and voltage setting... we adjusted the bios reading/setting a bit to make up for it, but tools reading from the hw monitor directly report it too high.Quote:
Originally Posted by MikeMK
what vtt is safe?
i know a lot of people who ran 1.5v for a long time without any problems.
Actually quite some people run 1.7v vtt to max out the uncore and i havent heard of any cpu dieing from that so far...
have uncore run at the same clocks as core seems to help iirc, and... you run 1.88v qpi voltage? what do you mean?Quote:
Originally Posted by MikeMK
ive heard from several people that a voltage jump is needed to get the cpu past a certain point, check if 1.5v helps. make sure mem isnt limiting you and try different uncore ratios, some work better than others.
have fun! :DQuote:
Originally Posted by MikeMK
so vdroop disabled does work fine, almost no fluctuation there, right?Quote:
Originally Posted by Rammsteiner
dont get what you mean regarding what the point of vdroop is...
vdroop is necessary for the pwm since we are pulling a huge current out of it and keeping the voltage 100% stable while switching from load to idle would hurt the cpu and the pwm. thats why vdroop disabled still has some droop, if it would be disabled completely it would damage the cpu and pwm in the long run.
elpida reference pcb, should work fine :)Quote:
Originally Posted by Lu(ky
check the cpu socket, you might have bent/broken one or several pins :SQuote:
Originally Posted by MikeMK
was the board powered off when you switched cpus?
why not? the only thing that matters is the load voltage.Quote:
Originally Posted by Rammsteiner
i havent seen a cpu crash in idle cause vcore was too low, in idle even very low vcore is fine at high overclocks, its load vcore that matters.
if you need more vcore then its usually because as soon as the cpu starts crunching it doesnt get enough juice.
thats with 2 SATA 75gb raptors in raid0 right?Quote:
Originally Posted by chawks2
so they are both about the same... i wonder how much faster sas is tho, havent seen any numbers myself.. been playing with sas here, but havent had time to bench.
turbo mode is basicaly reverse thermal throttling.Quote:
Originally Posted by Theansweris42
if your cpu gets too hot, itwill reduce the multiplier, right?
well to understand turbo mode better, imagine it like this.
a core i7 920 is actually not a 2666mhz (20x133) cpu but a 2933mhz (22x133) cpu! since, as we all know, i7 runs quite hot, its throttling to 2666mhz (20x133) all the time. UNLESS the temperature is ok and the current draw is ok... then it can run at 21 or 22...
turbo+1 works with all cores active
turbo+2 only works if 3 cores are idle/disabled
all boards need eist for turbo, the cpu needs it, but some have added an option and call it disable eist which stops the cpu from throttling in idle mode, but turbo still working. basically we do the same but call it "turbo always on" mode... think about it, in that mode the cpu will not drop the multi in idle like EIST does, and you can still run turbo mode and turbo multipliers...Quote:
Originally Posted by i7luver
others might call this EIST disabled+turbo enabled... :)
EIST isnt disabled though, so we prefered to call things the way they are and not the way its easier for people to understand, as it might end up misleading and confusing them and helps spreading misinformation and misonceptions.
i recommend you guys to keep HT off... really, there is no single real workd scenario/game ive seen that benefits from it, it actually slows some apps and games down, and what it mostly is does is just heat up your cpu and burn some extra 10-20W. if your on air this is very crucial as disabling ht might reduce your temps enough to push higher vcore and get a higher oc, which, admittedly, wont have a big impact either since i7 is a damn fast cpu and we are anything but cpu limited nowadays, but its more of a boost than having ht on... :D
I guess I misunderstood the point of the whole feature then. I thought, if enabled, it should actually be lowering Vdrop as much as possible, basicly keeping Volts stable at all times.Quote:
Originally Posted by saaya
But I noticed that when it's enabled the Vcore fluctated only more between load and idle than when it was disabled.
But if some Vdroop is needed to prevent the board/CPU from dieing, then why is there a warning message in BIOS saying enabling this might hurt the board? Cause yeah, with disabled the Voltage is a lot more stable, still varies, but with enabled the Voltage can differ a whole 0.05~0.06V.
As said, I guess I misunderstood the whole point of the feature to begin with:p: I always thought you'd want the Vcore to be as stable as possible when OC'ing, so hardly no fluctuations.Quote:
Originally Posted by saaya
Anyway, so what do you recommend then? Vdroop Control Enabled or Disabled? Cause Im confused which one to use now along with the warning message in BIOS saying enabling it might hurt the board, but at the same time with having it enabled the Vcore sky rockets under load, pretty much doing what you said was good (different Idle/Load Volts regarding Amps).
Thanks for reply saaya .I tried what you said but It didn't help.I have no problems achieving the 4.4 with decent temps at a lower multiplier but I just cant get past 24 with this bios.Here is a pic of temps and voltage with a lower multiplier.
http://img5.imageshack.us/img5/4428/bloodragep06.jpg
^ nice overclock man
So I just want to make sure I understand a few things Saaya:
EIST has to be enabled in order for turbo mode to work, correct? And all though other MFG's allow you to disable it, you really are not disabling it, is this correct?
You recommend HT off because real world software doesn't take advantage of it, is that correct? If so, then why does my Sony Studio 9 show it using all 8 threads when it is running?
Vdroop enabled means that the voltage to the CPU fluctuates, correct? Or do I have it backwards?
And you are recommending that you do have vdroop fluctuation for a better overclock unlike EVGA, Asus or Gigabyte, which recommend you enable Load Line Calibration in order to stabilize the voltage for a better/stable overclock, am I understanding you correctly? If I am, why do recommend that?
Are you saying 1.5v vcore is safe for the cpu? My understanding was that 1.45v vcore was the max Intel recommended, not saying we don't exceed that, I am just trying to understand yours and Foxconn's position on this.
I am just trying to figure out some things about this board since mine will be here Tuesday and I do not want to be let down with this board. This is suppose to be the "Ultimate" overclocking board and just plain bad a**. I currently have the EVGA and I have played with the Gigabyte Extreme. The EVGA is awesome, easy to overclock, stable bios and great support. The Gigabyte, not so much, rough bios' and the support is lacking. What can I expect from this board? Will I be pulling what little hair I have left out or will I be praising Foxconn? I am currently at 200blck x19 on my EVGA and with turbo and HT on which puts me at an effective 4.2Ghz clock. It was pretty easy to do, but I am expecting to hit higher on this board, is it wishful thinking?
Understand that I am just trying to set my expectations for this board and that if it isn't the right board for me then fine I will move on. Some of the statements from your last post seem to be opposite of other posts/threads and statements that I have read from various sources and I just want to make sure I understand correctly.
Thank you.
One more issue with p06 .My computer does not shut all the way off now.When I power down it puts windows to sleep instread of shutting completely down.Any body else having this issue?
Yeah, mine does that too. Kind of convenient, actually. :D I wasn't sure whether this was some Vista quirk or the board itself, but nothing's been hurt so far. I think it was doing it with G19a as well, but can't recall, I didn't have that bios loaded for very long.
vdroop is the voltage fluctuating between idle and load, thats a design requirement from intel, trying to keep the voltage stable all the time when switching from idle to load would hurt the cpu and pwm alike.Quote:
Originally Posted by Rammsteiner
the current the cpu sucks when going to load is huge, and the change is so fast that, as far as i got it, its physically impossible for the pwm to react fast enough to keep the voltage stable. it can try, but if it does that, the voltage drops quickly as soon as the cpu goes under load, then the pwm pulls it up agressively to compensate for it, then the voltage spikes up, spikes down, up and down until it stabilizes. you wont see this on the hw monitor or even with a digital multimeter, only a scope can meassure it afaik.
think of it this way, your holding an empty tablet in front of you (no load/idle) and your goal is to keep it at the same hight (same voltage).
as soon as somebody drops lets say a phone book on it (sudden load), you will either drop the tablet a bit, or you will actually pull the tablet up slightly since you push too hard.its the same with pwms... the harder you try to keep the voltage at the same level the higher the chance you actually pull it too high or have it drop a bit, at least for a short period.
NOW, this is all with you seeing things, you can see when somebody drops the phonebook, and you can see the tablets position and after some time you will have learned to adjust for the load of the phone book and the speed it falls with. a pwm can NOT see the phone book falling! So more realistically, imagine the whole situation with your eyes closed... :D
now imagine how hard it is to keep the tablet at the same level when all the sudden a phone book falls on it :D
and a pwm doesnt face the same load all the time!
picture the same secnario, with closed eyes, and sometimes somebody drops a cd on the tablet, sometimes a wallet, and sometimes 3 phone books... :D so, i think that gives you an idea why its not easy to keep vcore balanced, and why the harder you try to keep the change from idle to load close to zero and the voltage at the same level, the more you might pull the voltage higher than it should be or have it drop more than it should be.
voltage changes are not that important, and idle voltage is not that important, what matters is having the voltage stable once you load the cpu. and there is a complex design of capacitors, power planes, traces, and capacitors on the board and pcb package of the cpu again, and then a mesh of power and ground pins inside the cpu pcb package that irons out fluctuations very well. so even if you see vcore fluctuating, chances are the cpu never saw it.
again ,keep in mind that monitoring voltages via the hardware monitor is far from reliable, it could read a stable flat voltage but actually its not, and it can read fluctuations that arent actually there for the cpu since the voltage is read at a diferent spot than the cpu socket, or, the hw monitor chip or algorythm is simply unreliable and tends to fluctuate even though the reading is stable.
sorry for the long post :P
to sum it up:
vdroop = voltage change between idle and load
vdroop compensation = try to keep vdroop as low as possible
basicall vdroop compensation makes the pwm try harder to keep the voltage at the same level between idle and load.
the only way to improve this is having a faster feedback from the cpu to the pwm, to warn it as soon as it goes into load. thats basically what VRD12 is about that intel will introduce in H2-10 the way i got it. the cpu will communicate directly with the pwm controller, and the next step after that is probably the cpu having the pwm controller integrated. another point is that intel can watch over the voltages its chips get that way, but until the fully integrate the pwm into the cpu package or cpu, we will always find a way to trick them :P hehe
is that with CxE enabled?Quote:
Originally Posted by Rammsteiner
probably, right? in that case, what happens is that the cpu tells the pwm "im under load, i want more voltage please" and thats why it fluctuates.
core i7 has a dynamic vid adjustment which is basically intels way of forcing droop :D
the cpu will ask for higher vcore under load than in idle, it will change the vid just as it does hen it switches to power saving mode with 6x multi and lower vcore. to stop this, disable CxE... :)
the option is not vdroop, the option is vdroop compensation as in telling the board/pwm "fight vdroop as good as you can" :DQuote:
Originally Posted by Rammsteiner
and the fact that it causes more voltage fluctuations is most likely because it changes the vid to ask for more vcore under load.
yes, thats true to some point, but there is no pwm that could do this the way i understood it, and trying to do this will make the pwm overreact and voltages will shoot too high and then drop and wiggle around for a few fractions of a second every time the load changes, which in effect is worse than having is drop or increase slightly between idle and load.Quote:
Originally Posted by Rammsteiner
like i said, what matters is stable load voltage, you can ignore idle voltages as they usually dont matter, i havent seen a cpu crash in idle cause idle vcore was too low, and having a high or low idle vcore doesnt mean a thing, what matters is if the cpu is stable under load, and what voltage it runs at under load :D
i never studdied anything remotely related to engineering, so dont stone me if im wrong! :D but thats how i understood what a bunch of engineers from different companies explained to me over the time.
try both, it actually shouldnt make a difference if the resulting load vcore is the same, the max stable speed should be the same as well. the only difference really is rather that the voltage changes between idle and load, and unless your cpu needs vcore to be almost the same in idle as in load to be stable, there is no need to enable vdroop compensation actually... for all i could care vcore could drop .2v in idle or jump up .2v in idle, both wouldnt really matter since the cpu barely draws current in idle. lower is of course better since it saves a tiny bit of power...Quote:
Originally Posted by Rammsteiner
did you adjust the tdp tdc settings in bios?Quote:
Originally Posted by rwoodburn1
everest reads les than 130W max tdp, which is lower than default...
not sure if it reads it correctly, but i think it does.
please increase the setting and check with everest, it should be 150W or more depending on how high of a vcore your running and how high your ocing the cpu, then any multiplier will work fine on a 965 :)
as far as i know, yes... i asked the nehalem lead architect at idf last year, turbo is basically a EIST p-state, right? and he said yes... turbo works through eist. thats how its explained in all the intel docs as well...Quote:
Originally Posted by Utnorris
there are some few apps that do use 8 threads, that doesnt mean its faster though... if it is, and you use that app a lot, then sure, keep it on. im just saying there are barely any apps that can even use more than 4 cores/threads... most apps and games struggle to use more than 1 core efficiently at the moment... there are games that use 4 cores, like assesins creed, but they dont nearly max them all out and barely get a perf boost from having extra cores. so if you can clock less cores higher by disabling additional ones, then it will most likely end up faster than having many cores barely beeing used running at a lower clockspeed. thats the whole idea behind turbo mode... intel realized that most apps are single threaded and run faster with one high clocked core compared to several lower clocked cores.Quote:
Originally Posted by Utnorris
vdroop is always enabled, its a design requirement for intel boards, amd as well...Quote:
Originally Posted by Utnorris
vdroop compensation enabled means vcore should fluctuate less between idle and load. but like i said, if you keep CxE enabled, the cpu will request higher voltage by jumping up to a different vid state, which will make the voltage fluctuate even more as those steps are bigger.
only asus calls it load line calibration afaik, but yes. the thing is this, if we would follow intels spec on vdroop, then vcore would fluctuate a whole lot more, and would most likely cause problems for overclocking. disabling it makes things better, but hurts the pwm and the cpu. what we did instead is adjust vdroop so it DOES droop, but not nearly as much as intel calls for in their spec. and you can reduce the droop even more by enabling vdroop compensation.Quote:
Originally Posted by Utnorris
my position is that 1.6v+ is safe as long as the cpu is kept cool, foxconns position is probably "why are you increasing vcore? thats dangerous!" :lol: :DQuote:
Originally Posted by Utnorris
hmmmm to tell you the truth, overclocking wise most boards seem to be very close to each other... like i said, there has been a hype for beefy pwms for a while and all current highend boards have very good pwms, so theres no big difference there...Quote:
Originally Posted by Utnorris
at a certain point more just doesnt help anymore...
i dont like the bios layout of the gigabyte tbh, and the board layout either... i havent played with the evga but the bios i saw was ok, a bit simple but fine i guess... and the board layout and design seems good too. im curious how you will like BloodRage actually :D
i dont want to lie to you, evga has a very nice tool, while aegis panel is a bit unstable and buggy, so thats a drawback...
Another thing is that we are still tweaking the bios to get higher than 222 bclocks working. on the evga asus dfi and giga boards you can get 10mhz higher bclocks stable, maybe 20 under ln2... thats no big difference and for aircooling it wont make a difference even with 920s which are bclock limited.
some people still think higher bclock means better perf, but actually thats not the case. its a pure reference clock now, and if you run a lower multi with higher bclock and have cpu clocks, mem clocks and all other clocks the same, there wont be a difference in performance.
on ln2 and compressor cooling it makes a difference with 920s if you have a good one as the extra bclocks might help you to get an extra 200mhz cpu overclock. then again, if your benching ln2 or have a compressor cooping you will most likely be benching a 940 at least, so then bclocks dont matter again.
But we are working on it and should have 10mhz higher bclocks soon as well :)
i personally like the BloodRage the best of course, but thats cause its my baby to a big degree :D
better design, watercooling ready, better bios layout, more bios options, better cpu pwm, better mem pwm, better pcb layout for sli and xfire (free slot between the first 16x slots) 4 pciE 16x slots if you want to run tri sli or tri xfire (watercooled) possibly with a raid card, and pci soundcard, and a pciE x1 tv card :D
or quad xfire with 4 single slot cards, plus pci plus pciE cards... :D
no worries :)Quote:
Originally Posted by Utnorris
if there is anything you dont like about BloodRage or dont understand, just let me know! :toast:
hmmm thats a vista thing i think?Quote:
Originally Posted by rwoodburn1
ive always hated that, the default option is sleep mode...
weird that this changed when updating the bios though...
can you stil shut down if you click on the power button and then select shut down?
Quote:
Originally Posted by MpG
saaya I have tried tdp tdc without any changes took it up slowly even to 300w.Still nothing past 24x multiplier posts with p06.Here is a pic of 150 I have 29x set in bios.On the sleep mode issue, no my power button doesn't work.I have to hit the button on my backup to shut down now.Seriously thinking of RMA.
http://http://img17.imageshack.us/im...61/tdc1200.jpg
button on the backup... what do you mean?Quote:
Originally Posted by rwoodburn1
which button doesnt work? the button on the board or the vista power button in the task bar?
what if you use a lower setting? does everest read that correctly?
maybe the setting is too high already? hmmm
The button on my battery back up is the only I can turn off power to board now my case button has no effect either.When I shut windows down my fans and lights stay on but monitor goes off .Here is a pic of 150w result .Still stuck at 24.I didnt really explain properly.I tried several settings for tdc tdp even higher than 150w
http://img17.imageshack.us/img17/9061/tdc1200.jpg
Saaya, a hell of a long post but I fully understand it now, thx a lot:up:
Ill keep it disabled then since there's basicly no reason to have it enabled. I did have it enabled but the difference between idle and load was in some cases huge, 0.5V! Although, idle and load Voltages were higher to start with when it was disabled, but FWIW that's all read by CPU-Z.
Im slightly dissapointed in my system though:( Ive beautfull components, but the Uncore refuses to work at high speeds:( 4.3Ghz requires quite some Volts compared to 4.2Ghz, but I tried hard getting 20x210 instead of 21x200, but it's a no go. I tried lowering Uncore multiplier (with RAM being 50% of that of course) which worked, but what's the point of DDR1260 RAM:p:
The UnCore frequency depends on the Vram ( DDR3 Voltage ).Quote:
Originally Posted by Rammsteiner
Higher ram voltages allow the UnCore to gain stability at higher frequencies.
And of course, the maximum UnCore stable frequency depends on the CPU itself and not the board.
And keep in mind that there's nearly a wall on every i7's UnCore freq on air, restricted by the temps ( need to go subzero to be able to get pushed any further ) and not the voltages.
Im on water:p:Quote:
Originally Posted by BenchZowner
But... in what terms of Vdimm are we speaking here, cause 1.75Vdimm didnt do it:( Also wtf is the scaling of Uncore then? Cause it's stable at 16x200, but 16x210 isnt like a lot more:confused:
hmmm thats odd... so... you can use higher multis but under load it drops to 24? or you cant even use higher multis at all?Quote:
Originally Posted by rwoodburn1
weird...
well you understand what i mean :DQuote:
Originally Posted by Rammsteiner
that doesnt necessarily mean its the truth, i always recommend taking everything with a grain of salt and question everybody and everything, even, and especially, the proven things and people! :D cause those are the things and people that tend to not get questioned.
hmmm but i think cpuz eads pretty accurately on BR... can you please try with CxE disabled and vdroop enabled and check? it should be much better then :)Quote:
Originally Posted by Rammsteiner
yeah uncore is a big limit for i7... im sure without that 2 to 1 limit to mem clock we would be seeing DDR3 3000 already... at huge timings, but still... :DQuote:
Originally Posted by Rammsteiner
heres a hint, i heard 1156 has a 1.5 to 1 limit, so higher mem clocks with lower uncore will be possible :)
from what ive seen the realworld impact of mem ocing on i7 is tiny... ocing uncore seems to be a bigger boost than ocing memory itself.
and in some scenarios low speed tight timings seem to be better and other benchmarks/apps pefer high speeds with lax timings...
on x48 you could run low speed tight timings and high speed high timings and get about the same perf... the fastest was 1800 cas6, the second fastest was around 2000 cas7... i havent played that intensively with i7s imc yet, so im not sure about this stuff with i7... but i saw that tony from ocz focussed on low speed tight timings instead of high speed high timings when tweaking his i7 system...
from what ive seen most seem to aim for 2000+ cas7, still, same as on x48... so for that 4ghz uncore is more than enough... if you want more then you need to go subzero afaik... and you need a good cpu, the newer ones can run notably higher uncore with lower vtt, ive heard of 4ghz on water with 1.2v vtt :D not sure if that was 100% stable though...
vtt and vdimm, yes...with good mem that doesnt need high vdimm you can reach huge speeds without much vdimm, so in my experience vdimm is mostly needed if the mem needs it, not the uncore. but its similar to x48, more chipset voltage got you a higher mem clock stable or the same clock stable with less vdimm. its about the same with vtt and vdimm on i7. naturally... its most likely the same memory controller...Quote:
Originally Posted by BenchZowner
and the x48 memory controller stopped scaling around 1.8v, and for i7 it seems to be around 1.7v, slightly less...
and just like with x48, the first chipsets needed high voltages, some even 2v, and the later the stepping the less chipset voltage they needed to be maxed out, the latest x48 chips can do high mem clocks with 1.4v... same with i7, the first chips needed high vtt for high uncore and mem clocks, the more recent ones can do it with much less vtt...
what are your cpu clocks?Quote:
Originally Posted by Rammsteiner
i think uncore doesnt clock well if its above cpu clockspeed?
maybe thats why it needs so much vtt to get higher...
did anybody ever check how the efficiency is with uncore clocked the same as core compared to higher or lower? i remember anandtech did that but only briefly and they didnt check it at high overclocked speeds with fast mem speeds...
I always had CxE disabled;)Quote:
Originally Posted by saaya
Im not even pushing for DDR2000 lol, Im fine with DDR1600~1700. But yeah, my Uncore runs at 3.2 now, with a Blck of 210 it would run what, like 3.36Ghz. But it just refuses to, tried around 1.4VTT, 1.75Vdimm, just no way, C1 error.Quote:
Originally Posted by saaya
Set RAM multi to 6 but still C1, which pretty much makes the only suspect Uncore:rolleyes: Now if RAM multi at 6 would be worth while but it ain't regarding latencies (DDR1260 with tCL6:rolleyes:)
Weird thing is, my Uncore does 3.2Ghz with +100mV and 1.65Vdimm, but upto +300mV and upto 1.75Vdimm it just doesnt do it:confused:
My CPU is at 4.2Ghz, 21x200. But I'd rather have 20x210 for the increased Uncore and RAM speeds, but whatever I do, no way. Sometimes it doesnt come up with a C1 error but simply BSOD's after POST or just before log on, even tried to increase Vcore a bit incase CPU likes more Volts with a higher Blck:rolleyes:Quote:
Originally Posted by saaya
Quote:
Originally Posted by Lu(ky
Thanks saaya :up: I want to make sure before I spend $400.00 bucks...
Hi Gys,
maybe i am Blind or a retard but i d'hont see/have the option TURBO ALWAYS ON ??????? I just see ON or OFF ??? :-(
I use the PO6
Firstly Saaya... can I say thanks for the fantastic support and feedback you are giving on this thread... it genuninely is very useful and helpful, and makes me pleased I went and bought a Foxconn for the first time :up:
Secondly... im sure you will share my relief, that I got my board working again!!! You were right Saaya, a pin had been bent by the looks of it. Couldnt see it when it was in the case, and even when it was outside the case it took alot of staring blankly at the CPU socket to spot it.
Anyhow, with a small pin & magnifine glass I managed to bend it back into position and the board works fine. Ive changed CPU's soooo many times over the last few years and never done that... i guess its just a little reminder to myself be careful ;)!
Well, since I got it working, I stuck the 920 back in, and followed some of your tips in recent posts, and now have it prime stable at 4.1ghz - and the 21 multi on P06 works great btw!
http://img5.imageshack.us/img5/8417/92041ghz2.jpg
Testing 4.2ghz right now!
Did you confirm by checking in BIOS the tab Board Information? Or whatever it's called, I thought I flashed P06 but it still had P03, tried it 2 times after and still P03 untill I renamed the BIOS file into something really easy, copied to the flash disk and tried it again and that worked;)Quote:
Originally Posted by M.I.K.E.Y
Yup checked it an it says PO6 in bios and in CPU-Z :confused:Quote:
Originally Posted by Rammsteiner
i only see : TURBO MODE ( disabled/ enabled) ???
I must say , once i had the (always on) option in one of the previous biosses, cant realy tell wich one it was, but the option was there... now it's gon :shakes:
plzzz need help with this really annoying problem :welcome:
Ok, so I just unboxed mine that I received today from Newegg. I have a few opening comments on just the packaging and what not.
The good:
1 - Beautiful package.
2 - Well packed, everything is neat and packed well enough no damage should occur.
3 - Plenty of accessories (except a few, see below).
4 - Very thick manual and nice quick start guide.
5 - The board looks gorgeous, breathtaking.
6 - Water block is heavy all copper, awesome.
The Bad or Hmmmms:
1 - Only comes with a dual SLI connector, no triple SLI connector in the box. I only mention this since my EVGA board did come with it and one of the benefits of this board is the quad PCIe slots.
2 - There are 5 SATA cables and only one SAS cable, just seems like you forgot two. The board has 6 SATA connectors, so I do not understand why only 5 and it has 2 SAS connectors, why only one. Either include them all or none, that's all I am saying.
Overall, this is just a friggin awesome board.
Love the policy. Love the info. Back to benching.:cheer2:Quote:
Originally Posted by saaya
Bloodrage come for me today. Can't wait to start doing some tests.
http://i31.photobucket.com/albums/c3...d/DSC_2529.jpg
Wow, a lot Dallas guys on here. We should have a BR party. :D
Dallas BloodRage Virus... soon to be in the news! ;)
Well, now I need to figure out what everything does. The bios is quite a bit different from the EVGA board.
Dallas XS Lan Party 2009Quote:
Originally Posted by Utnorris
:yepp::D
Lan Party would be awesome. Get Runmc to bring the LN2. :D
So I got the Blood Rage to replace my EVGA and the bios naming convention is somewhat different, can someone tell me what the 3 I have listed below are in the Bloodrage? Also, did I get the rest correct?
Thanks
EVGA - Blood Rage
Vcore - Vcore
CPU VTT - CPU VTT
CPU PLL - CPU PLL
QPI PLL - ??????
IOH Vcore - IOH Core
IOH/ICH I/O - ??????
ICH Vcore - ??????
what other voltage i should adjust other than vcore in order to get cpu stable?? does the pll etc matter? also any other setting i should know that need tweak. it seem the cpu pass prime95 but can never pass intel burn test. anyone try the intelburn test yet?
Whats the best bios for this board? I am running P06 and am having some trouble getting my Kingston HyperX DDR3-2000 kit stable at their rated speeds. I am coming from the EvGA board and they ran fine at ddr3-2000 so I know they can do it. Thanks.
I was eager to get it up and running, so currently on Intel fan and all stock settings. Nothing special here, but more to come.
http://i31.photobucket.com/albums/c3...i7firstrun.jpg
hmmmm odd... ill check if i can reproduce this and will ask the engineers to check if maybe the vdroop compensation setting doesnt work properly. your on p06?Quote:
Originally Posted by Rammsteiner
did you play with other voltages too? what cpu clocks?Quote:
Originally Posted by Rammsteiner
dont get what you mean, sorry... but yeah, seems to be uncore that doesnt work... hmmmQuote:
Originally Posted by Rammsteiner
have you tried an even higher uncore multi? some dont work properly...
mhhh tried more relaxed timings? some imcs dont seem to like tight timings...Quote:
Originally Posted by Rammsteiner
and your keeping mem at low clocks and lax timings?
tried more vtt?
hmmm well what the max vtt you tried? only +300 aka 1.4v?Quote:
Originally Posted by Rammsteiner
thats probably around 1.35v real, so not really that much... and your cpu seems to need more vtt, its an older c0 right?
oh and rammsteiner, please lay off the :rolleyes: smileys for a couple of days, i think im seeing an addiction developing there :D hehehe
theres cpu turbo and sytem turbo. sytem turbo enables the overclocking options, cpu turbo should have enabled disabled and always on.Quote:
Originally Posted by M.I.K.E.Y
maybe the option was removed by accident in p06? i actually didnt check, ill check tomorrow!
for those of you having problems flashing the bios, make sure you set the bios jumper to select either rom1 or rom2. otherwise you might flash rom2 while using rom1, which explains while after a sucessful flash you still dont see the bios you flashed :D
thanks :)Quote:
Originally Posted by MikeMK
yeah 1366 lga pins seem to be more sensitive than 775, glad you could find the bent bin and set it straight again!Quote:
Originally Posted by MikeMK
good to hear :DQuote:
Originally Posted by MikeMK
nice! :DQuote:
Originally Posted by MikeMK
glad you liked it!Quote:
Originally Posted by Utnorris
1- tri sli connector... well only very few people use it, and people might use different slot combinations since there are 4 slots... so we didnt want to spam everybody with tri sli connectors... but we should have included a long flexible sli bridge so people can setup tri sli if they wish to by using 1 long and 2 short bridges... thats true.
2- all sata and sas hdds i bought/got at work came with a cable... so again we didnt want to spam everybody with loads of things they dont use... we werent 100% sure if somebody maybe buys a whitebox sas or sata drive, or some vendor decides to sell them without a cable, thats why we included one sas and a couple sata cables.
i dont know about you guys, but i have a pile of cables from boards and cards that i never used and probably never will use... most people i know have a box full of those svideo, vga to dvi, usb and firewire slot frames, sli and xfire bridges in all lengths, shapes, colors and brands, floppy cables, pata cables, sata cables, molex to sata power cables, molex to vga power cables...
i just thought cutting it down a bit would reduce costs of the bundle a bit to make the board cheaper or have some other feature implemented on the board, and i dont want to sound like a hippie, but i really dont like the idea of contributing to stockpiles of plastic that never gets used and sooner or later gets burned... all to make a mainboard bundle look a little more complete...
if you really need more cables or connectors you can get them on ebay for 2$ or let me know and i can ship you a set. and we can change that in future boards, actually let me go and start a poll on how many connectors you want/need bundled with the board in the foxconn qf suggestion box section here on xs :D
thanks for the feedback! :toast:
wow, thoe evga card come in red now too?Quote:
Originally Posted by BrokeDown
looks very sweet! :toast:
there isnt really a qpi pll voltage, gigabyte called it that but its only referred to as vcca IOH 1.1v in the intel docs, so thats what we called it. it does help with high qpi/bclocks, but i dont think it actually is the qpi/bclock pll voltage.Quote:
Originally Posted by Utnorris
ICH vcore is called ICH Core in BR, thats the sb voltage, and IOH/ICH I/O is called IOH VCCA 1.5v on BR i think.
IOH and ICH are connected via the DMI bus, which is essentially a 4x pciE 1.1 link, and that uses 1.5v.
pll and ioh core and ioh 1.1 seem to help with high bclocks/qpi clocks and curiously sb voltages seem to help sometimes i heard, but i never saw it give any boost myself...Quote:
Originally Posted by s002wjh
3x1 or 3x2gb kit?Quote:
Originally Posted by Bootsy
what vtt?
3x2gb vtt @ 1.57 ,IOH at 1.32, do I need to go higher? And thank you for responding!Quote:
Originally Posted by saaya
I'll try to get some better pics later today.Quote:
Originally Posted by saaya
Quote:
Originally Posted by Bootsy
BenchZowner BETA BIOS can be found here Boosty... Try the G19a Beta
Foxconn BIOS
^^
Got it and thank you Lu(ky!
Thanks for the response Saaya. As far as the cables go, it's just an observation and not a really a complaint. I have plenty of SATA cables around, so that is never a big deal. Since I usually get OEM drives to save a few dollars they do not come with the cables. So really, it is just knowing that it doesn't come with it that would really help. I don't know of any MB manufacturer that actually lists the parts inside on the box, maybe you could do that.
As far as the voltage names and what not, I will give them a try and see what I can do. I did find a peculiar issue, I was having stutter or slow down on response time from the computer, meaning if I was dragging the mouse from right to left it would pause and then go several times. I traced the issue back to a program called overclocking.exe. I believe this is part of the Aegis panel and once I ended that particular process, everything was good to go, just something for the techs to look at.
Not for the million dollar question, where/when can I get the VFD panel?
Thank you again for all the help and answers.
ditto!!Quote:
Originally Posted by Utnorris
P06 yeah.Quote:
Originally Posted by saaya
However I discovered that with Turbo Boost on that Vcore is different than when it's off:p: Although Im pretty damn sure having Vdroop compensation did made quite a significant difference in Vcore read by CPU-Z, Turbo Mode does a little job there as well;)
I kindly played with IOH and IOH VCCA Voltages however I think not that much, set IOH Core to 1.25 and IOH VCCA (1.1) to 1.25 or so).Quote:
Originally Posted by saaya
Also played with CPU PLL, but as I seriously have no clue what's that for I couldnt bother going higher than 1.87V (10mV within Intel's specs:p:)
I tried VTT, Vdimm and Vcore of course, CPU speed was around 4~4.2Ghz, in stable range though.
I might try that, although 12x Uncore gave issues too. However just at the end of testing and giving up I discovered Turbo Boost gave another Vcore boost, so I might have undervolted my CPU back then while testing with the 12x multi:ROTF:Quote:
Originally Posted by saaya
Yes, went up to 9-9-9-20-2T, 6x multi, resulted in a C1 error.Quote:
Originally Posted by saaya
I dont know what old is, but the batch is 3841A522, which seems to mean week 41. It's a C0/C1 stepping according to CPU-Z and Core Temp reads it as an ES:p:Quote:
Originally Posted by saaya
But yeah, upto +300mV max VTT.
lol:p:Quote:
Originally Posted by saaya
So the first three IOH settings could make a difference in Blck clocking?Quote:
Originally Posted by saaya
Could you eventually give a little guideline for a 210 to 215Mhz Blck regarding Voltages? For 24/7 usage though, although I know you cant guarantee anything but I do not plan to RMA my CPU every month:p:
Thx in advance;)
I'm trying to decide the same thing! :yepp:Quote:
Originally Posted by s002wjh
There are a couple things first. There are two versions of the standard EVGA x58 board, same board, the only difference is that one comes with a two year warranty and is missing a few accessories, while the other has a lifetime warranty. So that will be the first thing to decide on. Now for the differences between the EVGA and the BR and there are a lot:Quote:
Originally Posted by rambler358
What the BR has that the EVGA does not:
1 - Included cooling options for passive to LN2.
2 - Two SAS ports that will also work as SATA ports.
3 - 4 PCIe slots that operate as 2 at x16, 3 at x16x8x8 and 4 at 8x8x8x8. The first two are the same as the EVGA board.
4 - The BR will except a 775 cooler mount.
5 - Separate audio card vs. built in.
6 - In theory it should be a better overclocking board base on the components. Whether this is true or not is debatable and probably lies more on the chip than the board.
7 - Optionnal VFD, which is friggin cool.
What EVGA has the the BR does not:
1- Probably one of the most important, Shamino is helping design the boards and bios. If you do not know him, he holds a bunch of overclocking records and may be considered the best, although that is always debatable too.
2 - 6 memory slots
3 - 3 x16 slots that are spaced equally to make it easier to run tri sli.
4 - I personally found their bios easier to use and navigate when overclocking, however if I had started with the BR I might feel the opposite.
5 - You can turn off EIST and turbo still works.
6 - Their vdroop disable works very, very good, I mean almost no fluctuation.
Mainly it seems to me based on what I have read on these forums like the EVGA bios has more support. This is always debatable, because it should be about quality, not quanity. To me the BR has more features, better cooling and just looks wicked. It also costs more, now granted if you do not want the cooling options or the SAS ports then the new GTI may be better for you, but until that actually gets released you are looking at anywhere from $20 to $70 between the two boards. If I was going with EVGA, I would just do the cheaper with only 2 years warranty. With the BR it isn't so simple since I water cool and I like having the SAS ports, you may not need these and therefore you could save by going with the GTI.
There are a lot more that you could talk about as far as the differences go and a lot will have to do with opinion.
Hope that helps some.
One last thing, I had the EVGA for 2 months before getting the BR and as long as I can overclock it the same I will not be going back to the EVGA board. Just my personal preference.