http://premium1.uploadit.org/soundx98//ssAMD.gif
http://premium1.uploadit.org/soundx98//ssSIDEGLOW.gif
gallery http://www.uploadit.org/gallery/14200
Printable View
Soundx98,
Nice clean & classy look. One of the best I've seen.
I like that kind of clean, sleek look. :up:
Good Job!
Jebus, a compliment from TheDude. Thank you very much man. I mean that very seriously.
If no one minds me elaborating a lil bit. I'm really happy with the Matrix Orbital and the LED Indicator Buss. They deliver a lot of information.
Silverstone TJ-067 Info here: http://www.silverstonetek.com/products-tj06.htm
*Removed front fan filter
*Replaced CoolerMaster fans with ThermalTake Smart Fans
*Rear fan holder rotated 90 degrees as it was necessary to mount Von Karajan module without hitting the fan.
*Added handles to the top. This is a steel case with Aluminum front panel.
*Sleeved and wire tied all visible wires. I hid the rest of them.
*Made Custom Flat Cable for Floppy Connection on Venus motherboard
*Changed DFI Stock chipset fan to Evercool VC-RE chipset fan TWICE (1st one D.O.A.)
Info here: http://www.bigbruin.com/html/evercool-vcre.htm
*Added 2x80mm Antec 80mm fans under HDD cage in brushed aluminum housing (I’m trying to keep One (1) Terabyte of storage cool)
*Ran all wires and connectors under the motherboard
*Spent hours on cable management (it was probably more like days)
*Vantec Silver Fan Buss in 5.25” Bay to control 80mm and 120mm front intakes, rear 120mm exhaust, and XP-90 heatsink fan. I chose this model cause it only changes the voltage from 7V to 12v. Means I don't have to worry about other hands on the knobs. All of the fans are Thermaltake A201X series smart fans with Blue LEDs –
Info here: http://www.thermaltakeusa.com/2005/...d/bluesmart.htm
(Note: I’ll be modding a Silverstone blank panel as the Vantec writing bugs me.)
*Matrix Orbital MX421 and customized LCDC software (Reprogrammed completely) Info here: http://www.matrixorbital.com and here www.lcdc.cc
*Dallas One-wire Thermal Probes (Accurate to within 0.5 degrees C)
pdf here: http://pdfserv.maxim-ic.com/en/ds/DS18S20.pdf
Examples of the Matrix Orbital’s display capabilities can be seen here:
http://www.uploadit.org/gallery/13039
*Custom STATUS LEDs on front panel – (They are multi-mode and work in conjunction with the MX421) How do they work? When rig is powered ON as follows:
LED1 Status
OFF/Connected to Internet
ON/Disconnected from Internet
FLASH/Chipset Fan not running
STROBE/CPU Fan not running
ON/STROBE/OFF (sequential) A voltage rail has dropped more than 1%)
LED 2 Status
OFF/CPU Temp below 35C
ON/Temp above 35C
FLASH/CPU Temp above 40C
STROBE/CPU Temp above 45C
ON/STROBE/OFF (sequential) Temp above 50C
LED 3 Status
OFF/GPU Temp below 45C
ON/GPU Temp above 45C
FLASH/GPU Temp above 50C
STROBE/GPU Temp above 55C
ON/STROBE/OFF (sequential) GPU Temp above 60C
These are High Output 5mm Blue LED in a chrome housing so they literally throw a laser like beam of light onto the wall across the room. Pretty hard to miss even sitting off axis.
*Dallas One-wire Thermal probes (one on Memory and one on Raptor with Chomerics T414 Thermal Tape) All information on the Matrix Orbital MX421is also displayed on the “Virtual Display” on one of the monitors.
*6.5” Farenheit LCD Internal display as second monitor
http://camerasandelectronics.com/it...tem=fart6502hrs
*15” Panasonic LCD EDTV for 3rd Monitor (Component In and TV).
Info here: http://www.lcdtvbuyingguide.com/pana...c-tc15lt1.html
Voltage and temps are all read by a custom MBM5 config for DFI boards.
http://www.dfi-street.com/forum/showthread.php?t=6798
Thanks again for the compliments
Awesome looking rig!Quote:
Originally Posted by scream
Soundx98,
I know what you mean about the info., I love my Matrix Orbital and my Digital Doc too.:D
There's another one that I forget the name of...some sort of analyzer that does everything but the dishes! :D
Brings out the gadget Geek in me!
BTW: Thanks for the software link :toast:
hehehe, sorry for being a little long winded. :slap:
But I'm sure the good Doctor (R.I.P.) and the Big Lebowski would approve :toast:
Nice job soundx98! :up:
can anyone tell me what LCD display is that?Quote:
Originally Posted by _CrAzY_BoY_
Quote:
Originally Posted by DragonWoLf
I think it's this one, except in black.. http://www.frozencpu.com/lcd-46.html
Crazy Boy, what is that grill that you have to cover the radiator on top called?
The grid is an Aquacomputer for AIRPLEX 240. As i know Crazy Boy because i'm also portuguese and had watched is project at full detail, i can help too...
thank you!
it looks beautiful
Yes it is this... :clap:Quote:
Originally Posted by en4cer
That's Right, thanks Black Phoenix :toast:Quote:
Originally Posted by Black Phoenix
leter with Zalman 7000AlCu
http://strony.aster.pl/crollek/antec/blue%20power2.gif
now with Ninja :banana:
all case
Ninja
My baby. Not finished yet. But working on it.
http://home.earthlink.net/~brukla/im...6/DSC01542.JPG
http://home.earthlink.net/~brukla/im...6/DSC01549.JPG
http://home.earthlink.net/~brukla/im...6/DSC01605.JPG
http://home.earthlink.net/%7Ebrukla/...6/DSC01558.JPG
The project log is in the signature.
Will post final images when the system is done. And I know its messy but what the hey.
Wow, copper pipes?
The look of that copper piping is wicked....
Cooper Pipes... Is diferent of what i normally see...:wiggle:
Well I like the look of copper pipes. Pain in the butt to solder sand and clear coat though.
Quote:
Originally Posted by jaguarking11
But its very unique! Props to your coolness!:p:
Mine......simple setup.....Mushkin high performance 2x1GB on its way to my setup....whahahahahah
http://img.photobucket.com/albums/v4...5/P1000797.jpg
http://img.photobucket.com/albums/v4...5/P1000796.jpg
http://img.photobucket.com/albums/v4...5/P1000795.jpg
http://img.photobucket.com/albums/v4...5/P1000794.jpg
AnthraX3D
nice and clean internals
gratz
^lol is that a thermaltake beetle? and also anthrax3d where did you buy that case, i have to have one
Yep thats ThermalTake Beetle, what do you me anthrax3d?
the Case is ThermalTake Kandalf Bought here in The Philippines!
Staucher
Is this Gpu Nexxos waterblock to heavy for the card? and does it it by somehow reduce the flow of the water. Its internal pipes is smaller that the most common watercooling fittings.
Hi
It is the NexXxos NVXP3 from Alphacool!
No is not Heavy on this Card.
the flow is good :)
x1900XTX stock-clock and Volts.. my Dual-Radiator with 2x120@7V
Mosfet ~68°C
GPU ~43°C
PCB ~44°C
good temps for noise-silent System :)
THx much for your answer. I have bought this too, but i am a little bit "coward" on installing it due to its weight and its smaller inner pipes. Anyway i ll give it a try...
update us on the temps.
some nice systems here. time to show off mine :D
here is my case. thermaltake armor with watercooling. specs in sig.
@ Staucher. Get rid of the 90' connectors.
@ haste. Very nice! :up:
90´Connectors?Quote:
Originally Posted by JoeBar
looks now
http://free.pages.at/speedy444/wak%FC-sys5.jpg
No with straight connections that cannot be done
the Temps and the flow are nevertheless very good
I like the front mayk freak grills =D Imo, a red lighting setup would look much better.
It looks very good to me.
Saw you´re using a nexxxos, is it good?
It is! :)
Staucher , did you do the carbon fiber work yourself? Either way looks good. Are you planning on doing anymore of the case in CF?
Yes :) Carbon foilQuote:
Originally Posted by lowfat
http://www.forumdeluxx.de/gallery/da...61-1-thumb.jpg
:nono: Crossfire is worthwhile itself not for me.
i have only 19 " TFT (1280x1024)
Quote:
Originally Posted by Staucher
sorry i meant more of the case in carbon fiber, not crossfire lol. :p:
no is enoughQuote:
Originally Posted by lowfat
Before
http://www.forumdeluxx.de/gallery/da...PC61-0-med.jpg
http://www.forumdeluxx.de/gallery/da...PC61-1-med.jpg
Now
http://www.forumdeluxx.de/gallery/da...PC61-2-med.jpg
http://www.forumdeluxx.de/gallery/da...PC61-3-med.jpg
well i made some changes and this is wad my com looks like now!
http://i30.photobucket.com/albums/c3.../newcase3q.jpg
http://i30.photobucket.com/albums/c3...l/P1020201.jpg
Sladesurfer's Rig
what do you guys think? Nothing fancy:)
Asus P5WD2 Premium 955x
Intel Pentium D930
G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM Unbuffered DDR2 800 (PC2 6400)
74 GB WD Raptor
XFX Geforce 6500 Pci-e Passive card
Ultra 500w PSU
Pioneer DVD-RW
Intel Stock Cooling
http://img333.imageshack.us/img333/6499/dscn13220el.jpg
http://img333.imageshack.us/img333/1374/dscn13199am.jpg
http://img243.imageshack.us/img243/8444/dscn13174sh.jpg
http://img282.imageshack.us/img282/7739/dscn13128aa.jpg
very clean inside
Very nice wire management. I like the neat and clean look myself.
Well done....sometimes less is more!
:toast:
Nice clean job!
Very nice clean job... I like it...
http://i74.photobucket.com/albums/i2...comp020019.jpg
http://i74.photobucket.com/albums/i2...comp020020.jpg
http://i74.photobucket.com/albums/i2...comp020021.jpg
http://i74.photobucket.com/albums/i2...comp020022.jpg
http://i74.photobucket.com/albums/i2...comp020023.jpg
http://i74.photobucket.com/albums/i2...comp020024.jpg
http://i74.photobucket.com/albums/i2...comp020025.jpg
All custom etching done by me. 1/4inch radiators and 3/8ths inch blocks running 1 80w pelt on the gpu and soon to add a 226w pelt on the cpu after I get a new psu.
My project log is here.
http://www.gruntville.com/phpBB2/vie...er=asc&start=0
And here's the origional
http://i51.photobucket.com/albums/f3...2/DSC02190.jpg
that etching is pretty sick Fozzy, nice one
http://img425.imageshack.us/img425/1130/Image030.th.jpg http://img425.imageshack.us/img425/2240/Image028.th.jpg http://img425.imageshack.us/img425/4695/Image026.th.jpg http://img425.imageshack.us/img425/3687/Image025.th.jpg http://img425.imageshack.us/img425/415/Image023.th.jpg http://img425.imageshack.us/img425/363/Image022.th.jpg http://img425.imageshack.us/img425/3706/Image020.th.jpg http://img425.imageshack.us/img425/3919/Image016.th.jpg
Nice work Fozzy, is that the Sunbeam case?
cmon, more pics more cases!
CompGeek: Nothin personal bro, but that wiring job makes my head hurt!
I'm just a fan of the clean look in PC cases. I'll post mine up here later, when I can dig out the digi-cam.
-Ghent
That :banana::banana::banana::banana: is leet. Wish I could buy etches off of you LOL.Quote:
Originally Posted by Fozzy
Ok, here's my current work in progress...
Old Full Tower, but all 80mm fans.. can't have that can we?
now 92, 120 & 172x151mm fans, hate the buttons, so I'm putting a Bulgin, and moving the LED's.
First pic is original, but Sprayed black.
http://www.insancen.co.uk/casemod/before.jpghttp://www.insancen.co.uk/casemod/92 mounted+cut.jpg
http://www.insancen.co.uk/casemod/172 mounted+cut.jpghttp://www.insancen.co.uk/casemod/120 mounted+cut.jpg
http://www.insancen.co.uk/casemod/172 with fascia.jpg
And yes, that fan is dangerous, ripped my nail clean off when I got a finger in it.
Bulgin?
How loud is that monster?
Quote:
Originally Posted by YanBooth
Vandal swtiches, they are sexy! Hardware pron at it's finest
http://www.bulgin.co.uk/Products/Swi...luminated.html
Yep, that's the one, but non-illuminated (Don't want too many lights on this one), but may swap an Illuminated one in, depends on the looks when I'm done with the Fascia...
The big fan is not as loud as you would expect, but the Startup whine (Changes pitch, sounds like an Industrial belt sander starting up, but in reverse), is bloody amazing... n00bs sh1t when they hear it, now I'll have to looks to go with it:D
The fan is meant to run at 24v 235CFM, but is about 125CFM@12v... but the 235CFM 12v version is the same chassis if I get bored of this...:D :eek:
waiting for milliput ( http://www.milliput.co.uk/home.htm ) to dry around the big fan, jet turbine type intake.. off to Model shop tomorrow to try to get a Nose-Cone for it... also filling in the line you cab see across the entire case, as well the holes by the Bulgin, don't like them there.
And why did you put your finger in it?Quote:
Originally Posted by InSanCen
G
Trust me, that was NOT intentional...:eek:Quote:
Originally Posted by Master_G
Was reaching to flick off PSU (was sitting on my OC'ing bench before this), and ARGH... Many Many naughty & Obscene words were said.. I may well have even invented new ones...
*EDIT*
Does anyone know of a UK stockist of the Bulgin Vandal Resistant LED's???
http://www.bulgin.co.uk/Products/Ind...O505_400px.jpg
Nice cases
Thought I'd post mine here, just got fresh pics. Voodoo PC MESA case, drilled for blowholes up top, everything inside has been upgraded from what Voodoo originally put in it. Not quite as creative and not as much effort as some of the cases on here though!
http://www.got-chow.com/pics/geek/rage_05.jpg
http://www.got-chow.com/pics/geek/rage_10.jpg
http://www.got-chow.com/pics/geek/rage_06.jpg
http://www.got-chow.com/pics/geek/rage_08.jpg
Edit: looks like only 2 IMG tags per post, so the others I'll use a URL tag.
Edit2: Don't know why only 1 image is showing up, so I'll post the links to all of them...
Edit3: n00b move... Forgot to add XS to my list of hotlink protection exclusion list... ;)
Now that one looks sweeeet:)
Last two rigs we built
Lian li pc 70 for a friend:
http://img410.imageshack.us/img410/220/pics0146ki.jpg
Mine:
http://img443.imageshack.us/img443/3...2medium6eq.jpg
Sick case there, love the look of it. It's actually a heavily modified Lian-Li PC-65B :D.Quote:
Originally Posted by Got Chow
Nick
I like silencers too. hehe these last two should be displayed in an art gallery:p:
Very nice cases! :up:
LOL, he should have saved some money for a new monitor. ;)Quote:
Originally Posted by Ssilencer
Nick,Quote:
Originally Posted by NickS
That's what I thought at first too! But there are actually some slight differences between the PC-65B and the PC-6070B. The most prominent being the top lid has a slightly longer lip on the 6070. I wanted to buy a replacement top just in case, and ran into all these issues with the widely available PC-65B top. The side panels are all the same though but the 6070 also has the door mechanism which is used on the Voodoo case as well.
where can i get one of those voodoo pc mesa cases :slobber:
AFAIK, you can only get one from Voodoo... Included is a mobo, cpu, gpu, HDD, XP, etc. :D I bought mine used from a forum member over there and I have seen them on eBay once I think. That case is actually discontinued now, they now use a modified LL1000B I think, called the MAGA case, which is the case used for their entire "Omen" line.
Little update for you... Pretty much finished building up the Shroud around the Papst Fan... Couple of "Action Shots" for you...
http://www.insancen.co.uk/casemod/shroud finished1.jpg
http://www.insancen.co.uk/casemod/shroud spinning2.jpg
http://www.insancen.co.uk/casemod/floppy sanded.jpg
Care to give me some honest opinions on the Work so far?
Hey Got Chow do you know who makes the case for Voodoo ? Some parts of it remind me of a lian li case. Ops never mind I read the post below.
Oh yeah I like your case sladesurfer, I really like nice clean look. Is the power button on your case a dell monitor power button ?
Not sure how many like to see rackmounts, but here is my current setup.
http://img129.imageshack.us/img129/8526/img03999cd.jpg
My 150mm Papst NEVER EVER got turned on until there was finger protection on both sides, since @ full speed it WILL take off the finger (including bone) stuck in it :slapass: :slap: (Looks like something Rod would feed kittens to) Otherwise looking forward to the finished product WITH A GRILL :up:
And I run my 150mm off an adapter that uses 5V & ground :D
Quote:
Originally Posted by InSanCen
Profesional looking stuff. I rather like it.Quote:
Originally Posted by alucasa
I bet your an IT. Im working on my rackmount stuff. Including a 12bay scsi NOS device full of drives.
http://img156.imageshack.us/img156/1531/pict43764dg.jpg
http://img123.imageshack.us/img123/1759/pict43780mk.jpg
http://img149.imageshack.us/img149/4651/pict44036au.jpg
http://img149.imageshack.us/img149/5475/pict43946al.jpg
http://img223.imageshack.us/img223/518/pict43958gt.jpg
http://img288.imageshack.us/img288/1...ict42660on.jpg
Wow, CyberDruid!!! That's awesome, and it doubles as a good looking table. I wish I had that much woodworking talent.
I like I like!!!
GJ CyberDruid!!
:D:D:D
wow now thats somthing different...good work there!
i||uSi0n^
Pls resize the pics la....not everyone on 24in lcd le....wah lau
Those pics are 56k killers:worm:
But they are nice nevertheless.:toast:
Now that's what I call CUSTOM !!
Great pix. I like'em large too, shows the detail. Lot's of rigs there man, looks great. :D
Nick
Yeah for sure. Ill post mine when my new case comes :)
I have always contended that a mod is never done. This is the 3rd and final incarnation of WeldZilla 2 This time I finished off a lot more. My 10n year-old son and I got a little nuts. But we had a ball doing it!!
Even the Waterblock and hold down got it.
http://img.photobucket.com/albums/v2.../IMG_1856a.jpg
http://img.photobucket.com/albums/v2.../IMG_1855a.jpg
Even the top of my Desk got it!
http://img.photobucket.com/albums/v2.../IMG_1863a.jpg
I got to tell you when I got the Idea to put my WZ on the desk I knew it was all good
http://img.photobucket.com/albums/v2.../IMG_1893a.jpg
Even the Mouse and speakers are color coordinated
http://img.photobucket.com/albums/v2.../IMG_1881a.jpg
Even a couple hot wheels cars paid the price
http://img.photobucket.com/albums/v2.../IMG_1903a.jpg
http://img.photobucket.com/albums/v2.../IMG_1897a.jpg
http://img.photobucket.com/albums/v2.../IMG_1874a.jpg
It was all in good fun!!:toast:
WZ
Green and yellow....do you work at John Deere?? :lol2:
Reminds me of donkey kong :D
how so?Quote:
Originally Posted by sabrewolf732
looks like green bay packers colors as well hehe
Hey I was just tired of blue. Everywhere you look most systems have blue lights and I was just ready to change color schemes for awhile.
WZ