Yeah Kenneth where did you disappear to. At one moment you were hear and you were gone at the next.
Yeah Kenneth where did you disappear to. At one moment you were hear and you were gone at the next.
Just read that thread I posted, its all in there :)
Here is a updated pic, i ran out of money so i have no cpu atm.
http://webpages.charter.net/jumper75/mobo.JPG
J/K'ing hopefully the damn FX chip will be here thursday the 15th.
sysfailur: I hate your comp, but I love for mini fridge bar:D.....kidding:toast:
hi all
my bedroom with my rig:banana:
http://membres.lycos.fr/m4inaction/a...%20(Large).JPG
heheh...nice bedroom rig :D
What kind of heatercore is that, it looks pretty big with nice fitting placement.
Dark:Thats one ghetto azz bedroom rig :p:
Yuri:AWESOME! :slobber: Very clean work :toast:
hmmm...somehow I never noticed yuri's pics until now :toast:
damn, that's nice looking. Do you have a larger diameter tubing going to your pump inlet, or does it just seem like it in this pic.
26k is damn nice :D If only I had waited 1 month I would have had a 3200 and not a 2.6c and 2.4c :stick:
:welcome: :up:
:D
a small update
Argh that case is too bright.
If it is under a table facing a way it wouldn't be bad at all. In fact, you probably wouldn't even need to change the lightbulbs in your celing light fixture if they went out :D
LOL........But it is not enough to light the room......too bad.:)
DAMN:mad: :banana:Quote:
Originally posted by shidokanjohn
LOL........But it is not enough to light the room......too bad.:)
My rig :)
http://home.no.net/geek:banana::bana...c/IMAG0006.JPG
thats sexy :toast:
http://home.no.net/geek:banana::bana...c/IMAG0010.JPG
Not xtreme yet :( but very soon :banana:
Nice ....Quote:
Originally posted by shidokanjohn
:D
a small update
Just finished painting my case.
Pretty much just a frame left.
http://home.gt.rr.com/biggie135/Stripped.jpg
Front of my burner.
http://home.gt.rr.com/biggie135/burnerfront.jpg
Dirty D. cutting the graphics on the top panel.
http://home.gt.rr.com/biggie135/dirt...ing-grafix.jpg
Dirty D. drawing the graphics on the top panel.
http://home.gt.rr.com/biggie135/dirt...ng-grafix1.jpg
Finished top panel. (except for out line of graphics and clear coat.
http://home.gt.rr.com/biggie135/dirt...ix-painted.jpg
The paint I used.
http://home.gt.rr.com/biggie135/paint.jpg
Parts in the process of painting.
http://home.gt.rr.com/biggie135/parts2.jpg
Side panel First set of graphics. it's still not done more stuff will be added to it.
http://home.gt.rr.com/biggie135/side.jpg
Another almost stripped pic.
http://home.gt.rr.com/biggie135/stripped3.jpg
Stripped except for the bottom.
http://home.gt.rr.com/biggie135/stripped4.jpg
Just seeing what it looks like.
http://home.gt.rr.com/biggie135/test1.jpg
Schweeet modding.
nice biggie, keep us updated.
here is my system...
:brick::brick::brick::brick::brick:
http://www.hkge.com/bbs/attachments/CwF6_PICT1041.jpg
http://www.hkge.com/bbs/attachments/4MCi_PICT1042.jpg
http://www.hkge.com/bbs/attachments/Ak46_PICT1048.jpg
http://www.hkge.com/bbs/attachments/LAhE_PICT1012.jpg
http://www.hkge.com/bbs/attachments/zJRp_PICT1013.jpg
http://www.hkge.com/bbs/attachments/9dX7_PICT1017.jpg
http://www.hkge.com/bbs/attachments/e4QZ_PICT1049.jpg
http://www.hkge.com/bbs/attachments/lGvy_PICT1014.jpg
custom case and h2o?
Thanks I have a few more pics but my camera isn't working right.Quote:
Originally posted by r3b0rN
nice biggie, keep us updated.
It's put back toghether except I left the top loose so I can have the outline and clear coat done and the non windowed side still has a few things left to be done to it and I'm thinking about etching some graphics on the window also.
Edit: got it working.
http://home.gt.rr.com/biggie135/pic0002.jpg
http://home.gt.rr.com/biggie135/pic0003.jpg
Custom case, mmm preety.
hkalex that system is no reason to be banging ur head against a brick wall :D its very nice, id be over the moon to have a rig that good.
biggie, very nice job, wish i had that custom case :cool:
hey all, Ive been in this forum only for a couple months, but I have to say I feel at home here. I tried different forums, and Ive learned something from having so much "forumination", a lot of people are idiots out there, and Im glad to have found such smart , knowledgable people, with creative ideas. Well here are some of my rigs, I havent photohgraphed my other computer room, as Im still sticking it together. I have a total of 9 actual rigs that I use, and that are overclocked... and a few laptops here and there.
..
.
my R404 Mach I with YS tech fans
and in my basement, a full music studio with sound booth and all...
this pic came out a little fuzzy
just one question, whats your line of work?
Im an executive director for Shine-films, we do music videos and promotions for celebrities. An Senior Executive at Syntech, a private company that provides high level data encryption for coporations. and I own 9 very popular adult websites ), which I started back when the most popluar ISP was not AOL, but "Prodigy" :) . Im extremely busy, and usually work 7 days a week and have to travel a LOT, which sucks, cause more than half the time, I just want to be sitting in my computer room playing some games, or reading on the internet...
ahh ok, (cough, drugs) Very impressive , and welcome to the forums, you'll fit in just fine!
lol yah I get that from cops all the time, they think I sell drugs haha. thanks for the welcome :)
i am a bit frustraded, after seeing all those rigs.
but mine 9800 pro with a DCP plate.
you said a DCP plate was for setting broken bones, right? Are you a doctor or did you break something? :p:Quote:
Originally posted by Marvin
i am a bit frustraded, after seeing all those rigs.
but mine 9800 pro with a DCP plate.
yeah, looking at all of expempt's rigs makes me want to shoot myself....:lol:
lol, don't shoot yourself... :D
Sorry ,DCP is a plate design to fix bone fractures.Yes, i am a Traumatologist.:)Quote:
Originally posted by Çhrist0ph
you said a DCP plate was for setting broken bones, right? Are you a doctor or did you break something? :p:
yeah, looking at all of expempt's rigs makes me want to shoot myself....:lol:
Nice :D.. could someone make me a guid how to fix a watercooled computer? u guys seem kinda l33t to me so plz help me and show me whats the best :banana: :banana: :banana: :banana: :D
Marvin, do you know where I might be able to get a hold of some of those (I am not a doctor :D). They seem perfect for mounting coolers and such, like you are using it.
gouda96, this kind of plate is a bit expensive (more or less U$400,00) because is design especifically to this surgery, but i think you can find cheaper solutions.
:)
400.00! :eek:Quote:
Originally posted by Marvin
gouda96, this kind of plate is a bit expensive (more or less U$400,00) because is design especifically to this surgery, but i think you can find cheaper solutions.
:)
gouda69, im sure a strip of aluminum bar with holes drilled in it would work, no?
Yeah, it might work...but where would I find a small piece of Al or plexi glass for under $400 :toast:
Çhrist0ph is right. It is a bit complex :
http://products.synthes.com/prod_sup...gLCP3908Bh.pdf
here is anoption i had think before using the plate.Quote:
Originally posted by gouda96
Yeah, it might work...but where would I find a small piece of Al or plexi glass for under $400 :toast:
Drll two holes with 5.5 cm between them
So I guess that was the thing protecting the flyers defensemen, Eric Dejardins' broken arm that broke, while having a catch with his son, that put him out for the rest of the season :mad:
plexi for under 400? omg here in sweden u can buy a chassi in plexi for 60
I use the :D to convey sarcasm. I can get a nice big 4'x6' piece of 1/4" for like $15 I think. Stupid homedepot's plexiglass cutter is broken, so I am gonna make them out of pci slot covers. I have like 50 extras fron lian li cases and they are nice and thick and chromed out.
I really need to upload a pic of my rig at some point but I can't be bothered.
heres mine atm. i dont even know why i have it out all over the table, im not benching or modding anything.
it is much quieter tho....
I found some ducting so i thought id try to make my temps with a ducting mod.
cpu temps are 21c idle on my 2500xp @11x200(1.65v) with a 120mm 130cfm delta blowing 41F outside air onto my tt volcano 7+.
another pic.....
Nice rigg...
i hate it. Stupid 2500xp does 2.2ghz on 1.65v, yet sh*ts its pants when i try to run it any faster, even with 2.0vcore.
Its only holding me over till my vpc cooled AFX w/X800XT rig :D
nice duct, but do you use it 24/7?
hehe. I only used it for an hour or two. I decided it is pointless to keep my cpu cooler when it wont go any higher no matter what.Quote:
Originally posted by wimpie007
nice duct, but do you use it 24/7?
have you tried changing multi's or just raising the fsb from there? Is that a locked 2500?
Are you sure your ram can do higher?
its locked :(Quote:
Originally posted by gouda96
have you tried changing multi's or just raising the fsb from there? Is that a locked 2500?
Are you sure your ram can do higher?
im pretty sure the geil is crap for anything over 200mhz, but i also plopped in some
CH5 that has run up to 245mhz on past rigs. No luck even then...
updated pic with a touch of light..:
http://www.oc-central.dk/pics/cpu/rig.JPG
Hope you´ll like it :)
My POS system for now:rolleyes:
I dont even have a side window I take of the side panel...lol:p:
You just registered a month ago. I say no more than 1 year and that rig will have a prommy freezing atleast the gpu :DQuote:
Originally posted by =[PULSAR]=
My POS system for now:rolleyes:
I dont even have a side window I take of the side panel...lol:p:
I dont know about that, I'm ordering stuff first like AMD64 3200+, ZNF3-250, OCZ PC4000 Gold. Im gonna TEC cool everything and have 2 Thermochill 120.3 Rads. Gotta of course vmod everything too. I'm buildin a custom case as I type...lol.... an 18" Cube to house everything. Should have the case done by this weekend.
actually i´ve never seen a TEC cooled a64.. wonder how´s the oc would run?..
I have seen A64 do 2.5Ghz on watercooled with no MB vmods and you get 2.85Ghz...a TEC would prolly get somewhere in the middle, I would be happy with 2.75Ghz. Bias how much voltage are you running to your CPU and NB?
1.95 vcore.. NB voltage non as its non excisting ;)
I'm sorry the hot heat is killing my brain feels like that dont do drugs commercials with the eggs frying in the pan...lol...I meant the chipset.
chipset stock :)
My rig ATM..
Waiting for my FX 53 :D
http://www.home.no/dpa/Ftp/Bilder/XS%20bilde.JPG
im loving the rig dpa :D close those blinds though... :p: looks like the suns shining right onto ur computer lol.
mmmm R404a.
Sorry for all the posts, how do you attach multiple pictures???
Just got my Lubic case in friday too bad I was at NY and couldnt play with it when it came. Anyways heres some pics of the project so far. Right side of the case is so big I'm planning on puttin 2 Thermochill 120.3 Rads in this puppy:D
angle shot
front, look at all that room on the right, TECs are gonna be running a nice temp.
night shot....and thats it
thanks!Quote:
Originally posted by r3b0rN
im loving the rig dpa :D close those blinds though... :p: looks like the suns shining right onto ur computer lol.
Dual R404a "Power" :D
pulsar to have more than 1 pic in a post you cant attach the image, you will have to upload it to some webspace and use the [img] command to show them.
what codec is needed? i cant seem to play anythingQuote:
I use Winamp to open this file
@ =[PULSAR]= Nice Case, how much did that set you back?
Macci's video is in Divix...
Anyone know what the name of that song is? I like it :p:
Well without shipping the MB tray and 5.25" tray were $80, the lubic kit was $110, so $190 for now and gonna spend $50 for a lexan sheet to do the sides. A bit munch to spend on a case but I need the room for all the little gadgets I wanna put in there.
This is my DigiDice Setup - Tryed to break 3.0C@4.2Ghz, but without any luck.. :(
here she is atm.
For some reason, my computer decided it doesnt want to work when its inside the case. Ive put everything in the case several times, and every single time, it refuses to work properly. Looks like im going to have the comp all over my desk till i get a new case...
another one...
yeah i like da ghetto look :D
but i have a coolermaster praetorian with self made window and blue cathode looks nice too ;)
http://www.home.no/dpa/Ftp/Bilder/XS%20bilde.JPG
How hard is it, to extend the evap tube on a Mach II!
I plan to get one with a Lian Li PC75 ;)
My P4 2.2a rig from time ago! Has changed quite abit since then :)
http://www.fury-tech.com/images/user...2/DCP_0027.JPG
Çhrist0ph I know why your computer do not work inside of the case. Probably the are these metal bits to fasten the motherboard screws on the motherboard tray, they are wrong placed so they make short circuit on the motherboard.
(I do not know if you understanded me, but try to remove some of the metal bits that are sticking out of the mother board tray)
Bennah det er tøft å møte en nordmann på et amrikansk forum, jeg har sett proskjektet ditt før på ocshoot. og det virker kjempe tøft, når kommer neste oppdatering?
:banana: Yeahh , :rolleyes: :D :D
http://tafaelp.vila.bol.com.br/Tafa4.JPG
You what? :rolleyes:Quote:
Originally posted by MailmaN87
Bennah det er tøft å møte en nordmann på et amrikansk forum, jeg har sett proskjektet ditt før på ocshoot. og det virker kjempe tøft, når kommer neste oppdatering?
He said: "Its nice to nice to meet another norwegian on an american forum. I have seen your rig before, on www.ocshoot.no, and it looks awsome. When is the next update?"Quote:
Originally posted by Bennah
You what? :rolleyes:
Its norwegian. He got the names wrong tho.. Im guessing he actually ment dpa
My latest go at the benching madness.... I don't usually run the gpu wet but for some benching fun I slap on my mcw-50t, a little crude of a setup but effective nonetheless... Sorry about the crappy pics (1.3mp 5 year old cam)
http://www.reviewzone.ca/3.jpg
Yes thats right, I ment dpa. I hope i will get up some pics of my lame system soon.Quote:
Originally posted by Formann
He said: "Its nice to nice to meet another norwegian on an american forum. I have seen your rig before, on www.ocshoot.no, and it looks awsome. When is the next update?"
Its norwegian. He got the names wrong tho.. Im guessing he actually ment dpa
formann du er på ok.no ikke sant, jeg heter "det dvergiske kaffebord" der.
Hello.. Next update? What about now?
i have just tested some dry ice.. can upload som pictures tomorrow.
hyggelig med flere norske her ;)
my first dry ice testing ever (iam so young, only 17.. :-):
http://www.home.no/dpa/Ftp/Bilder/T%...%f8rr%20is.JPG
More pictures: http://www.home.no/dpa/Ftp/Bilder/T%f8rr%20Is/
those HUGE pics are going to rape your bandwidth.
talking to me?Quote:
Originally posted by All Kill3r
those HUGE pics are going to rape your bandwidth.
yup. i viewed the first 3 pics after about 5 minutes that it took for em to load, they are loading very slowly, sometimes i get an error while they try to load.
wxhat the hell,what kind of motherboard is that?!Quote:
Originally posted by JacobHansen
This is my DigiDice Setup - Tryed to break 3.0C@4.2Ghz, but without any luck.. :(
home.no are having som trouble..Quote:
Originally posted by All Kill3r
yup. i viewed the first 3 pics after about 5 minutes that it took for em to load, they are loading very slowly, sometimes i get an error while they try to load.