Micron D9 GMH\GKX\JKH etc club

Printable View

Show 100 post(s) from this thread on one page

06-07-2009, 10:31 PM
WaterFlex

radaja
Very good job, mate !

Guys! Congrats me! I have found the second RED DEVIL kit from CellShock manufactured 24/07! Now I have 4 Gb of CellShock power :up:
Tests soon...
06-08-2009, 04:01 AM
radaja

Quote:

Originally Posted by WaterFlex

radaja
Very good job, mate !

Guys! Congrats me! I have found the second RED DEVIL kit from CellShock manufactured 24/07! Now I have 4 Gb of CellShock power :up:
Tests soon...

thanks.
thats great news about the second kit of RED DEVILS:up:
06-08-2009, 04:35 AM
WaterFlex

radaja
Never thought Giga can produce quite good mobos...
Very nice chip :up:
06-08-2009, 05:37 AM
radaja

yea these gigabyteUD3's are great boards.
but like zsamz says,memory scores are about
average on the P45 front.the DFI P45's
memory bandwidth is much better.but hey
the way i look at it is these boards are right
in the middle of perfection.

PS-where did you find the cellshocks?
if you dont mind me asking.
06-08-2009, 10:06 AM
Don_Dan

Quote:

Originally Posted by radaja

well i couldnt seem to get 560x8 stable(orthos blend) so i just ran 1mPi and
took and everest SS.this is at pl9.im going to see if i can get 560fsb ddr1340 pl8
and run 32m Pi.because at 556x8 ddr1333 pl8 i got 12019 copy score.

Hey radaja, could you please post some settings, I'm mostly interested in CPU and MCH voltages ( ref, vtt... )

Would be very much appreciated! :)

Quote:

Originally Posted by WaterFlex

Guys! Congrats me! I have found the second RED DEVIL kit from CellShock manufactured 24/07! Now I have 4 Gb of CellShock power :up:
Tests soon...

Congrats! You have been looking for that kit as hard as me searching Crucial anniversary kits... maybe even harder. :clap:
06-08-2009, 12:23 PM
EliTE22

1 Attachment(s)

just playing around with my corsair dominators pc2 8500 ver 1.2
06-08-2009, 12:35 PM
GeorgeStorm

Everest bandwidth numbers needed!
06-08-2009, 03:29 PM
radaja

Quote:

Originally Posted by Don_Dan

Hey radaja, could you please post some settings, I'm mostly interested in CPU and MCH voltages ( ref, vtt... )

Would be very much appreciated! :)

Congrats! You have been looking for that kit as hard as me searching Crucial anniversary kits... maybe even harder. :clap:

sure.here you go.i had a hard time going above 540fsb then i changed my mch ref from 0.750v w/vtt of 1.28 to 0.770v w/vtt 1.28 shows in ET6 as 0.720v.

Code:

Load-Line Calibration [Enabled] CPU Vcore [ 1.25000 ]...................1.368 CPU Termination [ 1.20 ]...................1.28 CPU PLL [ 1.50 ]..................... 1.57 CPU Reference [ 0.760 ]...................normal MCH Core [1.100 ].....................1.40 MCH Reference [0.760 ]...................0.770 MCH/DRAM Refernce [0.900 ].................normal ICH I/O [1.500 ].......................normal ICH Core [1.100 ]..................... normal . DRAM Voltage [1.800 ]...................2.34 DRAM Termination [0.900 ]...................normal Channel A Ref [0.900 ]...................normal Channel B Ref [0.900 ]...................normal
06-08-2009, 09:17 PM
WaterFlex

Quote:

Originally Posted by radaja

PS-where did you find the cellshocks?
if you dont mind me asking.

There is one guy from my country, Russia, another city, which had had them for the last year :) Kit will have been shipped till the end of this week

My current kit does 1200mhz at only 2,02v, fully stable (Prime, WinMemtest 3.8). That guy sent me pics, his kit can do the same.
Today I take my Swiftech and EK wb`s for NB and Mosfet. Hope my MIIF will handle 4x1gb to make me happy :up:
06-08-2009, 09:24 PM
zsamz_

Quote:

Originally Posted by WaterFlex

There is one guy from my country, Russia, another city, which had had them for the last year :) Kit will have been shipped till the end of this week

My current kit does 1200mhz at only 2,02v, fully stable (Prime, WinMemtest 3.8). That guy sent me pics, his kit can do the same.
Today I take my Swiftech and EK wb`s for NB and Mosfet. Hope my MIIF will handle 4x1gb to make me happy :up:

many last good d9 pc2-8500 can do that but i guess u wanted them red heatspreaders lol
06-08-2009, 09:38 PM
WaterFlex

Quote:

Originally Posted by zsamz_

many last good d9 pc2-8500 can do that but i guess u wanted them red heatspreaders lol

You`re absolutely right :p:
06-09-2009, 01:47 AM
radaja

thats good that your new kit does 1200MHz at 2.02v too
that will make it easier to do 1200MHz with all dimms populated
and hopefully with 2.02v:)
06-09-2009, 11:47 AM
zsamz_

Quote:

Originally Posted by radaja

thats good that your new kit does 1200MHz at 2.02v too
that will make it easier to do 1200MHz with all dimms populated
and hopefully with 2.02v:)

they gonna need 2.04.2.06v;) for all 4
06-09-2009, 09:16 PM
Slyr7.62

Quote:

Originally Posted by EliTE22

just playing around with my corsair dominators pc2 8500 ver 1.2

If I may know, what Vdimm to you need for 4-4-4-12 @ 1200Mhz+ ? Also, what Vdimm do you need for 5-5-5-12/15/18 @ 1200Mhz+ ?
:up:
Thnx.
06-09-2009, 09:47 PM
EliTE22

Quote:

Originally Posted by Slyr7.62

If I may know, what Vdimm to you need for 4-4-4-12 @ 1200Mhz+ ? Also, what Vdimm do you need for 5-5-5-12/15/18 @ 1200Mhz+ ?
:up:
Thnx.

cas4 @ 613 was 2.7vdimm in the bios:( alot higher then i liked and cas5 600 is 2.1vdimm in the bios stable and with 4 dimms (same doms) in its 2.12v in the bios my other kits not as good
06-11-2009, 02:37 AM
Shiranui Gen-An

1 Attachment(s)

I'd previously posted these results back in April before XS lost quite a few posts, Maximus Formula with Rampage BIOS and my G.Skill 2GBHZ 1000 C4 kit.
06-12-2009, 08:47 PM
fatguy1992

I just tested 1 stick of my CellShock PC2-8500 ram with D9GMH it got 1200MHz (600) 4-4-4-12 :D with 2.58v.

http://img32.imageshack.us/img32/401...0613140453.png
06-13-2009, 12:00 AM
Slyr7.62

Quote:

Originally Posted by EliTE22

cas4 @ 613 was 2.7vdimm in the bios:( alot higher then i liked and cas5 600 is 2.1vdimm in the bios stable and with 4 dimms (same doms) in its 2.12v in the bios my other kits not as good

2.1V for Cas 5, 1200Mhz isn't bad at all. Especially with 4 dimms. 2.7V is insane, what do you use to cool the ram? Even though I don't overVolt my ram(much), earlier tonight I rigged an Antec SpotCool fan on Low speed.

Quote:

Originally Posted by fatguy1992

I just tested 1 stick of my CellShock PC2-8500 ram with D9GMH it got 1200MHz (600) 4-4-4-12 :D with 2.58v.

Wow, 1200+ Mhz Cas 4 sure does eat Voltage. 2.58V for you and 2.7V for Elite22. :lol2:

Good work though. Plenty of skills mixed with some luck equals breaking (performance) barriers.
06-13-2009, 12:07 AM
fatguy1992

Thanks :up:
06-13-2009, 01:59 AM
WaterFlex

Well done guys!
P.S. The results of playing with CellShock 4x1Gb PC9200 "Red Devil" are coming soon ;)
06-13-2009, 02:32 AM
Shiranui Gen-An

Quote:

Originally Posted by Slyr7.62

Wow, 1200+ Mhz Cas 4 sure does eat Voltage. 2.58V for you and 2.7V for Elite22. :lol2:

The last time I tested them, which admittedly has been a while, my Corsair DDR2-1250 kit could do 600MHz C4 with about 2.45V. It really just depends on the kit, but I'd say that confirms the sticks use GKX. I don't think GMH can do high C4 with low volts like that.
06-13-2009, 03:38 AM
CryptiK

Yeah those PC10000 corsair sticks were regularly hitting 600 - 620 MHz CAS4, but despite that some still couldn't hit 650 - 660 MHz CAS5 bench stable.
06-13-2009, 03:50 AM
Mafio

good gmh can do this. :yepp:

my crucial pc8500 can do 1200 4-4-4-4 with 2.38
06-13-2009, 11:22 AM
zsamz_

Quote:

Originally Posted by Shiranui Gen-An

The last time I tested them, which admittedly has been a while, my Corsair DDR2-1250 kit could do 600MHz C4 with about 2.45V. It really just depends on the kit, but I'd say that confirms the sticks use GKX. I don't think GMH can do high C4 with low volts like that.

good d9gmh can do 1200+ cas4 2.4v;)
06-13-2009, 05:58 PM
fatguy1992

Quote:

Originally Posted by Mafio

good gmh can do this. :yepp:

my crucial pc8500 can do 1200 4-4-4-4 with 2.38

Lucky, I wish I had ram that good :(

Show 100 post(s) from this thread on one page