XS Yonah T2600ES competition !!!

Printable View

Show 100 post(s) from this thread on one page

04-19-2006, 03:14 PM
kiwi

Just R570 and 20K in parallel?
04-19-2006, 03:17 PM
dinos22

Quote:

Originally Posted by s7e9h3n

OK...I can verify now that this mod works on air...it allows temp adjustment while in bios :woot:

great any clocks to report :p:
04-19-2006, 04:36 PM
kyosen

My method in details
<img src="http://222.151.144.54/c-board/file/i975Xa-YDG_Tcore_detail.jpg">
I wanted to get rid of infulence from CPU's thermal diode, so cut pattern,
but s7e9h3n's method may be enough, good job:)

FUGGER, I don't know other case, but feel possibility...

BTW, Franck gives me permission for distributing ClockGen-1.0.4.4!!!
http://222.151.144.54/c-board/file/C...n_1.0.4.4a.zip
Many thanks, Franck:toast:
04-19-2006, 04:45 PM
hicookie

great! final version? or beta?
04-19-2006, 04:53 PM
kyosen

Quote:

Originally Posted by hicookie

great! final version? or beta?

Think it as beta, please.
I often experienced inexpected FSB dropping at applying new FSB,
but don't blame Franck, it still works fine, very helpful!!!
04-19-2006, 05:13 PM
wwwww

Quote:

Originally Posted by kyosen

Think it as beta, please.
I often experienced inexpected FSB dropping at applying new FSB,
but don't blame Franck, it still works fine, very helpful!!!

Yep, just noticed, I set 220, got 94...:P
04-19-2006, 06:57 PM
overcrash86

Quote:

Originally Posted by kyosen

BTW, Franck gives me permission for distributing ClockGen-1.0.4.4!!!
http://222.151.147.127/c-board/file/...n_1.0.4.4a.zip
Many thanks, Franck:toast:

you got the first version (monday 10 april) isn't the last, i've one from friday 14 april : Clockgen 1.0.4.4
04-19-2006, 07:10 PM
kyosen

Quote:

Originally Posted by overcrash86

you got the first version (monday 10 april) isn't the last, i've one from friday 14 april : Clockgen 1.0.4.4

Yeah, I have 5 versions, and 2 of 5(1st and 4th) works fine:cool:
But 1st version is enough for me so far.
Anyway thanks for your info:)
04-19-2006, 07:24 PM
overcrash86

Quote:

Originally Posted by kyosen

Yeah, I have 5 versions, and 2 of 5(1st and 4th) works fine:cool:
But 1st version is enough for me so far.
Anyway thanks for your info:)

ok, i have 5 versions too, but haven't the mobo, then can't test :(
recive mine today, but, wasn't at home :mad: then test friday afternoon :)
04-19-2006, 07:25 PM
Dumo

Quote:

Originally Posted by kyosen

Yeah, I have 5 versions, and 2 of 5(1st and 4th) works fine:cool:
But 1st version is enough for me so far.
Anyway thanks for your info:)

Thanks for info kyosen:)
04-19-2006, 08:06 PM
s7e9h3n

Quote:

Originally Posted by kyosen

but s7e9h3n's method may be enough, good job:)

Thanks, but all credit goes to you :toast:

This whole intel thing takes a bit of getting used to. Still trying to figure out everything. I must say though, these cpu's are quite decent performers. This is on Aopen stock cooler and some crappy memory. I don't think this is the limit of the cpu on air, but I'm gonna mount the autocascade soon:hehe:

http://img100.imageshack.us/img100/2325/312019s3uy.jpg
04-19-2006, 08:26 PM
NapalmV5

Quote:

Originally Posted by s7e9h3n

Thanks, but all credit goes to you :toast:

This whole intel thing takes a bit of getting used to. Still trying to figure out everything. I must say though, these cpu's are quite decent performers. This is on Aopen stock cooler and some crappy memory. I don't think this is the limit of the cpu on air, but I'm gonna mount the autocascade soon:hehe:

http://img100.imageshack.us/img100/2325/312019s3uy.jpg

stepping 4 here, same results
04-20-2006, 12:58 AM
Chri$ch

can anyone tell me what i must do that clockgen run?

i read the manual on cpuid.com, but i can not set the clock :(
04-20-2006, 01:28 AM
Waus-mod

chrisch ygpm
04-20-2006, 02:43 AM
overcrash86

i just asked to franck his last made version, and is dated of 19 april :

http://wowgame.free.fr/util/ClockGen.zip

anyone can test it, and view if it's realy the last fully fonctionnal clockgen ?
04-20-2006, 02:47 AM
mike

VERY IMPORTANT - WHEN SWITCHING BETWEEN CPUS - ALWAYS CLEAR CMOS - ACTUAL CORE TEMPS WILL GO UP BY 20-30C if CMOS IS NOT CLEARED
04-20-2006, 02:50 AM
wwwww

Quote:

Originally Posted by mikeguava

VERY IMPORTANT - WHEN SWITCHING BETWEEN CPUS - ALWAYS CLEAR CMOS - ACTUAL CORE TEMPS WILL GO UP BY 20-30C if CMOS IS NOT CLEARED

Why does that happen?
04-20-2006, 02:52 AM
Staucher

:confused:

http://free.pages.at/speedy444/clockgen.JPG
04-20-2006, 02:57 AM
overcrash86

Quote:

Originally Posted by Staucher

:confused:

http://free.pages.at/speedy444/clockgen.JPG

select the PLL ...
RTM 865-461
04-20-2006, 03:02 AM
Waus-mod

LoL wrong pll

@ mike: omg.... what a news.
04-20-2006, 03:26 AM
Staucher

Quote:

Originally Posted by overcrash86

select the PLL ...
RTM 865-461

Oky its working now...
04-20-2006, 03:32 AM
mike

Quote:

Originally Posted by Gamer

max fsb is 249 :(

but, that's the max in bios too ?

I have the same max FSB on 3 cpus so far now too ( step 4 and 8 ) will see more soon...
04-20-2006, 03:35 AM
Sloppy

Quote:

Originally Posted by mikeguava

I have the same max FSB on 3 cpus so far now too ( step 4 and 8 ) will see more soon...

That's really weird....dare I say, it's the board?
04-20-2006, 03:42 AM
kiwi

I was wondering why yonahs have FSB problems even below 250 if any dothan 7x0 will do at least 250-260+ easily
04-20-2006, 04:09 AM
Waus-mod

Well people... mayb i have some really weird question.. In the manual there's nothing about the jumper (yellow) near the cpu ;)

Does someone know what it does in other setting? Mayb this is our fsb wall?
http://img.photobucket.com/albums/v3...-051230-01.jpg

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 07:24 AM.

XtremeSystems