NICE, eva....what is the maximum mhz running wPrime 1024M stability bench for that 8500?...i use that bench for my stability test.
NICE, eva....what is the maximum mhz running wPrime 1024M stability bench for that 8500?...i use that bench for my stability test.
Hi guys
why if i am trying to change vtt voltage in bios i cant see the diffrence in programs like cpuz or everest? they still have automatic voltage 1.12v
what i am doing wrong?
How did you get on installing audio drivers? Mine always says driver installation failed. Grrr. Maybe theres a site to get them from? As thats all I get when installing from the CD
You must be talking about something other then VTT voltage. CPU-Z doesn't show VTT.Quote:
Originally Posted by kolazero
qx9650 @ 4.0 Ghz. Nice low voltages too!
http://www.pbase.com/eltonandersen/i...3080/large.jpg
oh sorry i am looking for cpu voltage options
but i can't see different options abt cpu voltage in the bios
in bios voltage page i have smt like this:
sb core/cpu pll voltage -1.51
nb core voltage -1.265
cpu vtt voltage -1.211
clock gen woltage 3.45v
gtl ref voltage - disable
which options are for cpu core voltage change?
my cpu stocked in 3.37ghz, probably i need to make higher voltage
Still getting driver failed on audio drivers even downloading new ones from dfi site. any ideas?
the top option on that same screen, change it from auto.Quote:
Originally Posted by kolazero
NICE!...what is your VID for that 9650?...have you tried increasing the mhz to see where is the top limit for everyday idle conditions?Quote:
Originally Posted by crazyea
Right now, I am testing my other pc, but I believe my vid was about 1.136 or so. I'll verify that later for you.
These results were done with 4x2gb of g.skill as well. :D
Anything above 4ghz needs a bit more voltage, much like all the others I see out there. I am a bit wary to throw 1.4v at if for an extra 200mhz. That and the heat also increases into the 60's when loaded, and I'm watercooled here.
I think 4ghz is my ideal for this chip. I have also test with the exact same voltages at 421x9.5 and it is prime stable over a couple of hours, so I think the fsb is going to be where I squeeze a bit of extra performace out of it. This may, however be limited a bit by the 8gb of memory I have installed.
This article was very helpful on finding the right voltages for my cpu, and memory subsystem. I highly recommend it.
Overclocking Intel's New 45nm QX9650: The Rules Have Changed
So hows this Board compared to the mighty P35?
fine board with QX 45nm ... but she sux in fsb with E8x00 cpu's ... :eek: I hope DFI will solve it quickly.Quote:
Originally Posted by Brother Esau
Quote:
Originally Posted by crazyea
Nice oc..... you must be that funny looking guy I met at NCIX yesterday:D
Pitt, are we sure its a bios thing and not the board itself thats limiting the fsb on the wolfies? Any news when a new bios will be out? thanks
I wont bother testing for stability yet till they release a new bios to fix the wolfdale issues... I get BSOD even at faily low clocks once in a while...Quote:
Originally Posted by Ace-a-Rue
i hope :peace:Quote:
Originally Posted by luihed
It does?Quote:
Originally Posted by Pt1t
http://www.edgeofstability.com/image...misc/500x8.jpg
yeah, 500*8 is easy strait off the bat
Ah, you recognized me by the need to post low voltages huh? LOLQuote:
Originally Posted by luihed
I am still amazed at your 6.0Ghz screen shot though. :D
500fsb is not a problem but we'd like to see the cpu hit the fsb wall instead of the mobo:(, I thought I was haveing the worst luck cos I tried 2 E8400 and both cant get past 530fsb...Quote:
Originally Posted by Praz
Thanks.... actually its more the 2 mobos in your sig that made me recognized you... now I know how to get in touch with you if ever I need a stock cooler for my QX hehe....Quote:
Originally Posted by crazyea
Quote:
Originally Posted by luihed
don't blame you...the wolfdales and yorkfields seem to be hit and miss with a good overclock and being stable...the stability issue could be a bios issue.
Has anyone gotten clockgen or setfsb working on this board. Thanks
yes 500mhz , but high fsb is > 600mhz.Quote:
Originally Posted by Praz
i boot maximum to 520mhz on the DFI X38 and maxscreen to 540mhz.
The LP UT P35 tr2 one does easy 600mhz ... and the DARK P35 seems to do like LP LT X38 TR2. where are the mistake ??? PCB / Bios or chipset itself. :confused:
For the moment , only unlocked multi CPU's can do nice OC on it :D
http://users.skynet.be/pt1t/QX9650es/QX9650_5859.PNG
Has ANYONE got their audio to work on a DFI? Im going to have to go buy an audio card I think if I cant sort this.
Cheers
Sheldon
yes, setfsb works perfectly. :)Quote:
Originally Posted by PhilDoc
just select the "CY28551LFXC" clock generator
http://s2.directupload.net/images/080203/vik5kw4s.jpg
mine worksQuote:
Originally Posted by Bikerz
mine with setfsb if i boot 500 fsb and give just one all freeze....but it is not the wall i can boot and 520 but whatever above 500 i can't do it work....
I have an E8500...
I am with the fisrt bios may want update??
How i will do it and what bios do you suggest?