Printable View
I can do a 1m superpi on air easy 3.1ghz. You must have missed my post, its more than just a screenie. IF I put another fan onto my heatsink to replace my 59CFM 20DB panaflo I can do 32m most likely.Quote:
Originally Posted by mongoled
IF I pop the heatspreader I have no doubts at all that I will be 3.1-3.2ghz prime stable on air. Gotta see whether its worth doing though, especiually when I have phase change coming. Dont want to wreck what seems to be the 2nd best opteron on air out there.
Please do this, rather than talking abt it!!!! SuperPi 1M is easy peasy. Also suggesting tht it is 'likely' u can do 32M is again not good enuff, we dont do 'likely' here, SS and verification is where its at.Quote:
Originally Posted by computerpro3
You seem very confident tht you will do 3.1-3.2Ghz prime stable on air, 100mhz difference is alot when talking abt prime95 stability! Please make my comments look silly and jealous by showing me a prime95 screen shot at 3.1Ghz on air......
i can just see you living in the north pole in your igloo at - 30C posting a prime95 screenshot at 3.3ghz, LOL
:rofl:
Does this count as prime stable on air?http://img473.imageshack.us/img473/6...estable4uq.pngQuote:
Originally Posted by mongoled
No IHS, but I later realized when working on a 144 CABYE that the Windows was corrupt. Also on a nF3; my nF4 Ultra-D comes this week at which time I'll give 3.15 a serious go.
With the Opterons it seems it's 1M MHz minus 100-120MHz that's P95/OCCT stable.
Going from decent air to good watercooling only gains 50-80MHz. So if you're 1M stable at 3.1GHz right now, add 50MHz for the slightly better cooling and removing the IHS and then subract 110MHz for the P95/OCCT stable and you get 3.04GHz most likely.
No way you'll get 3.1 stable even on good water if it can 'only' do 1M @ 3.1GHz right now.
And (insert crazy long name here), yes that counts as Prime stable but not 3.1GHz ;)
And what kind of aircooling do you have? 30C idle temps are about 8C lower than I get with water :stick:
Magic air cooling? In seriousness, I use a XP-90. Ambient is around 19C, and my case is open.Quote:
Originally Posted by Vapor
I'd agree with that, it seems to be the way my chip reacts too.Quote:
Originally Posted by Vapor
Thts a good rough analysis on how these chips will clock,Quote:
Originally Posted by Vapor
as for the ambient temperatures, they are very low, looks like we will be going back to the discussion if air-con units strapped into case count as 'air-cooling'
Anyone got a butchers freezer near them, take your system in their, with your 'air-cooling' and get a prime95 stable scrren shot at 3.7Ghz
:D :D
tht would be air cooling right, LOL
hehehehehee
Nope, 3.1 is 3.1. On my 148 the last 30MHz comes hard. This isn't hand grenades ads or horseshoes. :DQuote:
Originally Posted by ixtapalapaquetl
:slobber: :slobber:Quote:
Originally Posted by ixtapalapaquetl
You got XP-90 and 30C idle temps with 1.6v :eek: , wht are your load temps, you got a freeking different CPU to the rest of us!!!
-EDIT-
Offtopic question, just noticed tht ixta... is on a nForce3 mthbrd, whts the voltage regulation like on those boards, better than the NF4's??
I don't know if you had a 9c ambient you could do 30c idle. :stick:Quote:
Originally Posted by mongoled
Yes possibly, with 9C but he has 19C ambient. Im on water cooling with 1.57v (multimeter) IHS removed and im idling at 30-33C right now, ambient temps id say are 19C.Quote:
Originally Posted by dogsx2
That is the million dollar question. I have always assumed that it is worse. I am getting a nF4 Ultra-D later this week, so I will have some interesting comparisons soon. Much more important than +/- 50MHz, however, will be my newfound ability to run my FF's at 1T!!! Now THAT'S going to make me happy!Quote:
Originally Posted by mongoled
@dogsx2: yeah, that last 34MHz is quite a hill to climb! We'll see...
148 running at 3.06Ghz @1.60v 30'C on air??? wow.....what kind of "air" you got there? can you get me some too? :D :D not only the cpu, but your chipset running at 1.6v and only 32'C and LDT voltage at almost 1.9v but pwmic only at 33'C!! interesting....still very nice clock and nice temperature though.
No for 30°C Idle its enough around 15°C Ambient with an XP90 and 1,376vcore.Quote:
Originally Posted by dogsx2
But 1,6Vcore its very hard with the IHS still on.
That's exactly our point....Quote:
Originally Posted by Rufus7
I think this might be the max on this CABYE 148 on air. The 146 and this 148 are sure close on max. I might be able to squee alittle more out of them. If only I had ixtapalapaquetl cooling, I know I could. :D
If you see anything in the 148 tweaker that will make it better, I'll sure try it.
http://img405.imageshack.us/img405/4...70vx1cc.th.jpg
Here's the 146:
http://img405.imageshack.us/img405/1...30705ot.th.jpg
Gun, here's the top HTT on this new mb:
http://img405.imageshack.us/img405/744/1484029ri.th.jpg
I forgot to reset the tweaker, sorry.
I have TT BT and I get 28C idle with 1.6V .. loaded 47C max...Quote:
Originally Posted by mongoled
With 1.55V idle = 28C ... Load = 44C max
With default V's = 26C idle and 39-40 load...
This is on MSI k8n neo2 plat blabla :p..
I have both, it must be kinda cool this time of year Somewhere in Hollanda. :) Do you live by ixtapalapaquetl?Quote:
Originally Posted by F|apDro|`
Assuming thats UTT then trfc 14 (12 if BH-5), preamble 6-6.5ns, MAL 7/8Quote:
Originally Posted by dogsx2
And trrd to 0 and trtw to 1.....good luck with those though ;)
Might want to also experiment with tref.
chilled air. can't argue with that :DQuote:
Originally Posted by mongoled
There isnt the Batch numbers!Quote:
Originally Posted by Rufus7
Cant se if its CABNE CAYNE or CABGE
Who is saing that the cabye do not rock :D
Water cooled IHS OFF
3200mhz Spi 1M 25,813 sek
3150mhz Spi 32M 23m12,047sek
3180mhz 3D05/03
http://service.futuremark.com/compare?3dm05=1354938
what sort of water cooling do you have....Congrats....that is certainly a very very nice chipQuote:
Originally Posted by t-max
Nice chip. I think the 148's are pretty good with any stepping. I have seen any bad 148's yet.The 144's get ALL the junk that doesn't cut it for the higher speeds.Quote:
Originally Posted by t-max