Printable View
using the 0703 bios on a plain P5Q ive been able to boot Windows upto 550fsb and have stability @ 500fsb. the P5Q is without a doubt the most uncooperative motherboard ive ever used :eek:
http://i224.photobucket.com/albums/d...Q/cpuz-550.jpg
http://i224.photobucket.com/albums/d...Q/occt-500.gif
Yeah the Pci-e one is loads faster, lower latency and much more efficient. I have got the pci one disabled in my bios.Quote:
Originally Posted by ebh
I have used the following hdd's without any issues.Quote:
Originally Posted by Nelly
- Hitachi T7K250
- Raptor 74GB (ADFD)
- WD 640GB (WD6400AAKS)
- Samsung F1 1TB
- VelociRaptor (WD3000GLFS)
I used AHCI/RAID mode for all the disks on XP Pro x32 SP3, Vista Ultimate x64 SP1, Server 2008 x64.
Hm, how do i know which is PCI and which is PCIe ?Quote:
Originally Posted by Mumid
It tells you in device manager but the pci one is number 2 in the bios.Quote:
Originally Posted by RejZoR
hey guys, i have one question, but off topic.
what is this temps and rpm cooler (aux) ??
psu maybe?
Thanks. :)Quote:
Originally Posted by Anvil
Ive got a weird issue with this board.
If I turn of the electricity at the mains overnight when I turn on machine, fans start then machine shuts down. Everything starts as normal second time round.
As long as I don't turn it off at mains machine starts up and shuts down normaly.
Ive got an e8400
4 g.b of G.Skill pc 8500
2, 74 gb w.d raptors in raid
and a 600 watt seasonic, running with vista 64 bit.
Yes it is.Quote:
Originally Posted by R@ptor =]]
Strange thing is that while using the pci-e one, I got "connected" to my isp at 1Gbps (instead of 100Mb while using the pci one). I thought both were gigabit.Quote:
Originally Posted by Mumid
Thanks for the advice.
here's what i am at
Q6600 @ 3.6ghz ... crysis stable and orthos stable for a good hour (needed machine).
AI Overclock tuner: MANUAL
CPU Ratio Setting: 9
FSB Frequency: 400
FSB Strap to North Bridge: AUTO
PCI-E Frequency: 100
DRAM Frequency: DDR2-1066Mhz
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: MANUAL
1st Information :
CAS# Latency: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Precharge: 5
DRAM RAS# Activate to Precharge: 18
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time: 55
Write Recovery Time: AUTO
Read to Precharge Time: AUTO
2nd Information :
READ to WRITE Delay (S/D): AUTO
Write to Read Delay (S): AUTO
WRITE to READ Delay (D): AUTO
READ to READ Delay (S): AUTO
READ to READ Delay (D): AUTO
WRITE to WRITE Delay (S): AUTO
WRITE to WRITE Delay (D): AUTO
3rd Information :
WRITE to PRE Delay: AUTO
READ to PRE Delay: AUTO
PRE to PRE Delay: AUTO
ALL PRE to ACT Delay: AUTO
ALL PRE to REF Delay: AUTO
DRAM Static Read Control: DISABLED
DRAM Read Training: AUTO
MEM. OC Charger: DISABLED
AI Clock Twister: AUTO
AI Transaction Booster: AUTO
CPU Voltage: 1.325
CPU GTL Voltage Reference (0/2): 0.660
CPU GTL Voltage Reference (1/3): 0.670
CPU PLL Voltage: 1.60
FSB Termination Voltage: 1.34
DRAM Voltage: 2.0
NB Voltage: 1.26
NB GTL Reference: AUTO
SBridge Voltage: AUTO
PCIE SATA Voltage: AUTO
Load Line Calibration: ENABLED
CPU Spread Spectrum: DISABLED
PCIE Spread Spectrum: DISABLED
CPU Clock Skew : NORMAL
NB Clock Skew : NORMAL
Advanced CPU Settings
CPU Ratio Setting: 9
C1E Suppport: DISABLED
Max CPUID Value Limit: DISABLED
IntelŪ Virtualization Tech: DISABLED
Vanderpool Technology: DISABLED
CPU TM Function: DISABLED
Execute Disable Bit: DISABLED
had it @ 3.2ghz (400x8) with 1.25v core / 400 strap producing everest mem bench results as much as 400mb faster than what i am getting now. would like to improve the voltages as i didnt achieve 3.6ghz sensibly - instead of altering values one at a time i was jumping several and not always by small increments. was done at around 4am my time whilst starting to sober up!
any recommendations?
settings for 4.0ghz 8x500fsb 1200DDR... (e8200/P5Q/Mushkin PC8500)
1611 bios
AI Overclock tuner: MANUAL
CPU Ratio Setting: 8
FSB Frequency: 500
FSB Strap to North Bridge: 333
PCI-E Frequency: 100
DRAM Frequency: 1200
DRAM Timing Control: Auto (5-5-5-18)
DRAM Static Read Control: DISABLED
DRAM Read Training: DISABLED
MEM. OC Charger: ENABLED
AI Clock Twister: AUTO
AI Transaction Booster: MANUAL (PL8)
CPU Voltage: 1.35
CPU GTL Voltage Reference: AUTO
CPU PLL Voltage: 1.52
FSB Termination Voltage: 1.14
DRAM Voltage: 1.98
NB Voltage: 1.14
SB Voltage: 1.10
PCIE SATA Voltage: 1.50
Load Line Calibration: DISABLED
CPU Spread Spectrum: DISABLED
PCIE Spread Spectrum: DISABLED
CPU Clock Skew : AUTO
NB Clock Skew : AUTO
CPU Margin Enhancement: OPTIMUM
C1E Suppport: ENABLED
Max CPUID Value Limit: DISABLED
Intel Virtualization Tech: DISABLED
CPU TM Function: DISABLED
Execute Disable Bit: DISABLED
:D
no worries, thats normal :yepp:Quote:
Originally Posted by octihead
Same here, i think is normal :p:Quote:
Originally Posted by octihead
i think the name of this is cold boot, correct me if I'm wrong guys :cool:
Cheers. Good to know.
Why you do this ??? Turn off the electricity is not needed at all, instead of times when BIOS fails to POST due to bad settings and you need to switch power button of PSU or to disconnect mains cable... I cannot understand why you ask such question - every time when you change settings in BIOS such as CPU voltage etc. this kind of restart occurs... So you have to be familiar with this instead if you do not clock your PC ;) I will say it again !DO NOT TURN OFF THE ELECTRICITY AT THE MAINS!Quote:
Originally Posted by octihead
Sorry if this is a daft question, how does it get the temperature from the psu? Does it come through the power connector?Quote:
Originally Posted by truehighroller
@BF2
don`t worry about youre core temps!
Still no tool available wich can read them exactly.
nice oc :up:
good to hear you're jumping on the P5Q-D bandwagon! Welcome!Quote:
Originally Posted by Big.Wayne
Hi forum! Hi @ll!
Well i got one of these mobos and I wonder if someone with Q6600 G0 has got FSB500 stable. I know I have to play with PLL, GTL and clock skews but Iīve been playing this afternoon and couldnīt enter to Windows (Vista Home Premium x64). Iīd like to know some prime stable config at 500fsb. Iīm with 0803 atm.
I wonder if my RAID0 could be problematic with oc and Vista x64 too. Thankss a lot !
PD: Long time without practicing english, spanish guy here. Greetings !
Well, I've surpassed my previous OC record for my Q6600 on this board.
http://i37.tinypic.com/vzizd4.jpg
1.575V, Ram at 2.1V, 5,5,5,15, 1:1, On Air
It wasn't stable enough for anything more than SuperPi though. Perhaps when cooler weather arrives...
That Vcore is too high I think. Be careful.Quote:
Originally Posted by Dr_BenD_over
q6600s are indestructible....i wouldn't worry.
No fears, it's earned it's keep, and that's as high as it goes.
Are those values @ Auto, right?