Micron D9 GMH\GKX\JKH etc club

@mafio: bella per te ;)

cellshock pwnage ;)

Quote:

---

Originally Posted by simone18

@mafio: bella per te ;)

cellshock pwnage ;)

---

thx :)

finally back in the thread. I moved and had no internet in my flat now for nearly 2 months (sux ass).

Well in the winter i threw my Watercooling outside on the roof and used car fluid as cooler so i had temps around 2 degrees celsius on my system (it's friggin awesome even now my water temp is always under 20 degrees and my components reach 35 max that means a GTX 280 and a 0C q 9550 and wc RAM). During that i was able to do some nice benches with everest around FSB 510 and RAm @ 630 MHz with different settings and i reached nice 45,1 ns which kicks at that FSB imo.


My Core Temps are alwys frozen and start to react at around 35. But the Core Temps are much closer to the shown CPU temp so they should've been around 22 i think.

Used RAm: Cellshock D9GKX PC 8000 4-4-4-12

Here's some pics:


First run Performace lvl 8:

http://www.abload.de/img/capture0se2.jpg


Second time Perfomance lvl 7:

http://www.abload.de/img/capture1ewpt.jpg


Itchin the subtimings:

url=http://www.abload.de/image.php?img=capture2qpx1.jpg]http://www.abload.de/img/capture2qpx1.jpg[/url]

Further tweakin. More lead to bsod.

http://www.abload.de/img/capture3cuqz.jpg

Good job here :up:

I got my highest bandwidth today :)

http://i292.photobucket.com/albums/m...92/550FSB2.jpg

Nothing to great though. Not sure why the read speed is low.

Quote:

---

Originally Posted by Mafio

thx :)

---

anche tu qui :ROTF:..

http://www.pctuner.net/hardware/Rece...p/pict7869.jpg

it's mine ram, unfortunately I can't reach 700MHz because "low" vdram of my mobo [2,55v]

Quote:

---

Originally Posted by User111

anche tu qui :ROTF:..

http://www.pctuner.net/hardware/Rece...p/pict7869.jpg

it's mine ram, unfortunately I can't reach 700MHz because "low" vdram of my mobo [2,55v]

---

dopo che le merde hanno deciso che ero di troppo mi sono cercato altri forum con gente un po' più capace. :D

it's time to change your mobo or do some vmod :D

Whoa, those are some crazy RAM sinks. Very nice!

got a new Xeon E3110 so im going to be going for some high fsb action with my new set of teams pc10400's.will post some results later.this cpu has a nice low vid.
http://i43.tinypic.com/netjl3.jpg

@radaja: very nice xeon. go for 1400+mhz on those tg ;)

@user111: ciao caro. if those ram are really good, 2.55v are enough to catch 1400mhz ;)

can someone tell me what chips these have and what a fair price to ask for them would be?
thanks

Capacity: 2GB (2 x 1GB)
Type: 240-pin DDR2
Speed: PC2-8000 1000Mhz
Cas Latency: 5
Timing: 5-5-5-15
Signal Processing: UNBUFFERED
Error Checking: NON-ECC
Voltage: 2.2V
Configuration: 128MB x 64
Mfg. Warranty: Lifetime Limited Warranty
Manufacturer Part Number: BL12864AL1005.16FD3

Quote:

---

Originally Posted by Ender17

can someone tell me what chips these have and what a fair price to ask for them would be?
thanks

Capacity: 2GB (2 x 1GB)
Type: 240-pin DDR2
Speed: PC2-8000 1000Mhz
Cas Latency: 5
Timing: 5-5-5-15
Signal Processing: UNBUFFERED
Error Checking: NON-ECC
Voltage: 2.2V
Configuration: 128MB x 64
Mfg. Warranty: Lifetime Limited Warranty
Manufacturer Part Number: BL12864AL1005.16FD3

---

PC2-8000 Ballistix Tracer
P/N ending with .16FDx
5.0-5-5-15 @ 2.2V
Micron D9GMH (B6-3)
Micron D9GCT (B6-37E) (possible)
Micron D9GKX (B6-25E) (possible)
Micron D9DQT (BT-3)

http://ramlist.i4memory.com/ddr2/

very good memory

yup, damn good kit ;)

Quote:

---

Originally Posted by simone18

yup, damn good kit ;)

---

:cool: any idea what a fair price to list them for would be?
thanks

about 40/50 euro

yes, about that price...i think 50euro could be right ;)

Quote:

---

Originally Posted by Mafio

dopo che le merde hanno deciso che ero di troppo mi sono cercato altri forum con gente un po' più capace. :D

it's time to change your mobo or do some vmod :D

---

in effetti da un pò che sei sparito :eek::shakes:

horewer my test with my memory xtreem 9600

http://www.pctunerup.com/up/results/...534_Cas3_3.JPG

the voltage is under the spec of Teamgroup 5-5-5-15 1200MHz 2,35v

• 3-3-3-9
• 800MHz
• 2.15v

:up:

Quote:

---

Originally Posted by simone18

@radaja: very nice xeon. go for 1400+mhz on those tg ;)

@user111: ciao caro. if those ram are really good, 2.55v are enough to catch 1400mhz ;)

---

ciao bello :clap::D:welcome:

Finally had some time this morning and got my CPU to 4.8GHz for a quick run of Everest memory benchmark. Broke 10k with 480MHz FSB @ PL=7 and 576MHz CL4 on the memory.

Memory voltage was set to 2.66V, the memory is one of my Crucial 10th Anniversary Edition kits.

http://img9.imageshack.us/img9/1189/...7cru10than.jpg

Anyone know how good old Team 4200 C3 sticks are? MemoryC is selling the one kit it has at an absolute steal: http://www.memoryc.com/products/desc...ty-/index.html

Quote:

---

Originally Posted by Shiranui Gen-An

Anyone know how good old Team 4200 C3 sticks are? MemoryC is selling the one kit it has at an absolute steal: http://www.memoryc.com/products/desc...ty-/index.html

---

i wouldnt touch em unless they had d9gkx witch i doubt but anything is possible with old stock
i got 2 sets of cas 3 pc2-6400 and they do 1200 but need 2.3v

Quote:

---

Originally Posted by zsamz_

i wouldnt touch em unless they had d9gkx witch i doubt but anything is possible with old stock
i got 2 sets of cas 3 pc2-6400 and they do 1200 but need 2.3v

---

Well, they're Xtreem, and not Xtreem Dark, so they have some kind of Micron chips, the question is if it's RevD or perhaps the older "Fatbody" variety.

heres a link to our missing page

http://74.125.47.132/search?q=cache:...s&client=opera

my last run on this board b4 it goes on the shelf

460FSB PL7 , no tweaks

http://i237.photobucket.com/albums/f.../1240ram_2.png

pl 8 rulez :D

http://forum.hwproject.net/imagehost...96f31c1917.jpg