6min16 seems soo easy, even rejects do it under cold :D
Printable View
6min16 seems soo easy, even rejects do it under cold :D
trfc 56 passed a couple runs but was slower, strange could have pushed trefi harder but forgot woops.
So much win:bounces:Quote:
Originally Posted by Splave
Hey guys so I had 4 lrts of LN2 left and decided to test 2x2gb,would of liked bit more Ln2 to push bit more,think there still more in it,pretty close to my other time.
bullant - 6:16:328 - 102x49 - 1327.2MHz - 6-10-6-24-70-1 - Gigabyte Z77X-UP5TH -G.Skill Pi 2000C6 2X2Gb/PSC - 2.1v -CPU SS -30 / Memory LN2 -105
http://s22.postimg.org/3n6keyr5d/2x2x2.png
This one was even better
http://s16.postimg.org/ahdk846l1/2x2x2x2.png
^Show us TRCD 9 and I am sure you will beat your 4x2GB time with ease, hell your 2x2GB with above settings might do it.
Very nice as usual especially with only 4LT. My single stage should be showing up in the next few weeks so that will save some LN2, which means more memory to test under cold:)
I think the new goal we should be aiming for is 6:15.xx, before Haswell launch:D
last one until refill
bullant - 6:16:313 - 102x49 - 1327.3MHz - 6-10-6-24-65-1 - Gigabyte Z77X-UP5TH -G.Skill Pi 2000C6 2X2Gb/PSC - 2.1v -CPU SS -30 / Memory LN2 -105
http://s15.postimg.org/txtd1pyi3/313.png
hey bull so you can run 2700 with 4 dimm but 2650 with 2 dimm? or just run out of gas before you could push it
hey Splave,my .219 4x2gb run is at 2650 too,just the 2x2Gb can tighten up more,yeah the 2x2gb is more stable at higher Mhz like 2700Mhz.The 2x2gb seems as good cause I can tighten more.both 2x2Gb and 4x2Gb were both @ 6-10-6 2650Quote:
Originally Posted by Splave
Nice work on the tRCD 9 guys ^
^ my mistake :) is 2700 7-10-7 not faster? Ive never tried because my imc cant do it.
Yeah mate 2700 6-10-6 is faster but @ tWCl 6 its not easy to pass.The little test I did was about 8 loops but had to back of a bit on tRCD and tRFCQuote:
Originally Posted by Splave
trying some trident bbse right now
http://i.imgur.com/QbUyt4p.jpg
Just notice you said 2700 7-10-7,I didn't try cl7 was still on cl6.Im still using crap waza and no ram drive,you would notice on my 24 loop to value output is always about .100 of ,will have to work on it.Enjoy your benching I'm sure you will produce some nice results as always
seems this is not the best for 32m, maybe good 1m/PF or Im off on the vtt/sa combination that it wants.
http://i.imgur.com/bv0W8md.jpg
Youd think 7-9-6 twcl 7 or 6 would pass but not dice, kicking down to 2400 divider and adding some bclk they fail before the avantium. But maybe worth trying again in the future. Certainly not trash :X
testing l0uds epic bbse today thanks bro had a blast.
Splave - 6:17:500 - 100x50 - 1200MHz - 6-8-5-16-58-1 - ASROCK OCF -G.Skill Rip 2200C9 2X2Gb/BBSE - 2.1v -CPU SS -50 / Memory LN2 -155
http://i.imgur.com/vBH6Crr.jpg
Splave - 6:17:313 - 102x49 - 1225MHz - 6-9-5-16-58-1 - ASROCK OCF -G.Skill Rip 2200C9 2X2Gb/BBSE - 2.1v -CPU SS -50 / Memory LN2 -155
http://i.imgur.com/jehceIs.jpg
Couldnt pass 2600 anything really but thats IMC related must be because l0ud and I had totally different experience with this kit.
Rest is just fun
2800+ 7-9-6-18 (which was an accident forgot to lower mem divider)
http://i.imgur.com/Fcm1PiK.jpg
Pretty ballin' aIdA lol
http://i.imgur.com/GImzELV.jpg
never seen that before in 1m personally
http://i.imgur.com/nzQT3xe.jpg
^That kit is truly the red headed step child, PSC mhz, with Hyper timings + lots of volts + lots cold=win:ROTF:
Excellent work Allen would have never thought that kit could do 2800 7-9-6 and boot from bios at those timings, truly a special kit, I think that kit needs a bit more vdimm / right IMC and it is going to do some crazy stuff on Haswell:D
So much out of the box thinking man, just blowing my mind!
Indeed...insane kit right there Splave. Congrats on that random 2800mhz run :D
agreed, good luck tonight manQuote:
Originally Posted by l0ud_sil3nc3
You guys are going hard
Hard en the paint!Quote:
Originally Posted by bullant
BBSE is such a blast to run under cold man, even though it is much harder on the IMC, but I would have never guessed they could run so high mhz wise. What is the max vdimm on the Giga board Bull? Higher than 2.1v? Maybe time to give the UP5H a spin since it runs BBSE so well...
Setup ready to go
http://i.imgur.com/vRG4jDZ.jpg
randobin BBSE binning method per Splave, grab two sticks out of reject pile with eyes closed and bench, bench, bench:D
http://i.imgur.com/cjzXZQc.jpg
http://i.imgur.com/OS37Jy0.jpg
Didn't think you had a UP5, its 2.1v in bios,I've only tried 1 kit of BBSE on UP5 and it didn't even go well.It was a low end kit tho(1600 Mhz),im sure it run bbse nice tho .I really only use PSC on it,the correct imc,vtt volts is the key for up5,really the key IMO,this mite be also on most boards but I've only ever tested Gigabyte on Z77
^what do you use man, seems 1.103v is money on OCF
l0ud, the future of avantium is in your hands bro
the future is here:DQuote:
Originally Posted by Splave
So randobin Avantium dimms did not fail to please, sure there was no c6 twcl 6 action but considering these dimms would not run over 2400ish on air, I don't think the results are too bad.
best 5Ghz time
l0ud_sil3nc3 - 6:16:829 - 100x50 - 1300MHz - 7-9-6-18-68-1 - Asrock OC Formula -Avantium 2133 2X2Gb/BBSE - 2.1v -CPU LN2 -55c / Memory LN2 -150c
http://i.imgur.com/QRSODLv.png
Really weird though, here is a no waza run which was smoking fast
http://i.imgur.com/F16Yj5f.png
but every run with waza was sooo much slower, makes me think I am taxing the IMC a bit much or the dimms can't do it not really sure.
http://i.imgur.com/AvfETuc.png
nice sticks here, impressive runs Splave and loud! :clap:
l0ud_sil3nc3 which Vddr like it on air? I have BBSE, but their dislike Vddr over 1.84 at air and I don't know is it worth to trying with LN2 or not :confused:
If you mean vdimm, this kit needed 1.92v for 2400 8-10-7-21 with everything else tight and tWCL 6, so supper crappy in other words:rofl:Quote:
Originally Posted by MaJ0r
If you mean vtddr then, auto which in the case of the Asrock board is 0.764v.
I think if you have BBSE that gets to 2400 on air, then it is probably worth trying under cold, but keep in mind I needed -150c at the dimms for the above as even -110c was not enough:eek: