Printable View
The GO version can in theory be overclocked at lower voltages. Considering this idea, you should be able to overclock much higher at lower overall voltages. I think in reality if you shoot for low overclock 3.2-3.6Ghz you can overclock at lower voltages with the GO. However, anything over 3.6Ghz and the voltages for 4Ghz requires similar voltages on the GO processor as well as the other version.
You've got a sweet setup 2000army. Nice job with the watercooling.:clap:Quote:
Originally Posted by 2000army
Got my new chip today... the old b3 is sold.
The new one is: (dunno what numbers u guys need, write them down all)
BX80562Q6600SLACR
MM# 891337
FTO: L731A442
Packdate: 08/22/07
Anyone know what is baby shold clock to?
Thanks Alot! Getting ready to sell it and start a new one.Quote:
Originally Posted by Hans Gruber
Nice gbglassen, you test max fsb yet?
yeah, arround 500:down:Quote:
Originally Posted by Eldonko
Yea, mine's the same, I think that is pretty standard. Need to find the 550+ fsb chip. :(
Atm I'm priming at 3.6GHz and 1,48-1,49v under load (not so nice vdroop on the MSI :() Temps are 73, 73, 68, 68. Is that ok? Cooling is on the sig (using the fan on the Xigmatek at full speed)
Seems like I got a really awesome CPU... Q6600 L737B G0, I am booting and 3DMark06 stable at 3,2GHz (400 x 8) @ 1,26V (1,3V in BIOS)
Thats sick :D
BTW with a Thermalright Ultra 120 (non-extreme), I am Idling at 36-37 degrees on the cores via Core Temp!
This is such a nice start:
http://img265.imageshack.us/img265/4...marks06qy7.jpg
VCore is at 1,256 atm ^^
Sweet. I could do 333x9 at stock volts, but as soon as I set it a few MHz above that, I had to pop voltage up to ~1.35 o.OQuote:
Originally Posted by S1mon-
I got the same batch, 3920Mhz @ 1.48v for now, will post some screens soon. So far 510Mhz FSB stable on P5E3. Will test today on P5K Deluxe or Gigabyte X38 DQ6 DDR2 :up:Quote:
Originally Posted by S1mon-
Rbs.
:wave:
Awesome!!!Quote:
Originally Posted by rbsmontemor
Same batch (and Vid) as mine, 4Ghz Small FFT prime stable with 1.5v as my sig :)
Your temps are so low :shocked:Quote:
Originally Posted by Devious
Here @ 3920 1.48V Im' at 65ºC SmallFFTs :( I don't know what I need to do to get lower temps :(
I'm really angry with my WC setup...:down:
Rbs.
Mine is about the same rbs. Devious' chip is abnormally cool.
It is cold here and I did recruit the help of 2 x Y.S Tech fans ;)
My Q6600 is also damn cool... 35-38 degrees on the core with CoreTemp @ 3,2GHz and 1,256V... I know the voltage is low but I was expecting about 45-50 degrees on the cores at 3,2GHz. This CPU keeps surprising me!
My cooler is a TR Ultra 120 (non extreme) with a Silverstone FM122 (at med speed)
I was wondering if the extreme edition could be better but now I notice that my current one is just fine.
Look what I got for 198.99 CPU+Cheapo Motherboard SLACR !!
http://i220.photobucket.com/albums/d...n/IMG_2457.jpg
So far I have got too 3.24GHz (360 x 9) stable running Prime 95 for 8 hours.
I have just tried 3.30 GHz (366 x 9) and the PC either BSOD's or fails Prime95 in the first 15 mins.
Setting are as follows.
RAM 800 MHz 2T 5, 5, 5, 5, 24 1.9v
366 x 9
vCore 1.45v (1.40v BIOS)
FSB 1.40v (1.40v BIOS)
SPP Auto
MCP 1.5v (1.5v BIOS)
HT SPP <> MCP Auto (1.2v BIOS)
CPU is cooled with the Swiftech Apex Ultra kit, load temps are 60'
Any help is welcome !!!
I just placed an order for mine. I have managed to get myself the GO stepping. Can't wait to try it out.
Anybody out there using a Scyth Ninja for cooling? how far are these things going with air cooling?
you lucky bastard! Nice :up:Quote:
Originally Posted by leoftw
Here is my Q6600 I bought last week. Happy with it so far. This screen shot was from some quick testing, will do more soon.:D
Batch, L737B
http://img413.imageshack.us/img413/6...001mairjz5.png