Just installed...boxed chip and OCZ 5400EB all maxed in bios with stock hsf/air
http://img115.imageshack.us/img115/6...shot0248yw.jpg
Board got to go to operating table asap before more cooling added....for 3 seconds quicker:)
Printable View
Just installed...boxed chip and OCZ 5400EB all maxed in bios with stock hsf/air
http://img115.imageshack.us/img115/6...shot0248yw.jpg
Board got to go to operating table asap before more cooling added....for 3 seconds quicker:)
Dumo, is there any chance you've try setting 10x multi and FIRE it up @ FSB, Im quite qurious if its the same as the former samples, or its actually a bit better this time, especially since "I've order same place at yo" :toast:
Its retail boxed T2600 (I think multi locked) and NE first day retail board..
http://img20.imageshack.us/img20/656...shot0290bl.jpg
http://img133.imageshack.us/img133/6...shot0095dh.jpg
Seems like Crystal cpuid can be use to change multi...
http://img77.imageshack.us/img77/666...shot0250wj.jpg
http://img77.imageshack.us/img77/502...shot0271ne.jpg
under air!
still improving!
http://iamxtreme.com/cpu/t2600/aopen_yonah_009.JPG
http://iamxtreme.com/cpu/t2600/aopen_yonah_010.JPG
or no :(Quote:
Originally Posted by kingkong
hi KatsumiQuote:
Originally Posted by kyosen
congrats (great results)
and ...yes...same finding here in Germany - though there are some rare fine results
with 4 stepping cpus , stepping 8 seems to be the way to higher fsb.
m
How to know it's it's a step 4, 8 or else ?
Written on what ?
anyone tested this stepping ? (T2400ES)
http://wowgame.free.fr/Yonah%20T2400/T2400ES.jpg
i know it's a T2600ES thread, but no one exist for other stepping :p:
can anyone from our friends in Asia
comment the rumours in circulation about a new revision A1 of
the AOpen board
A tad higher...
http://img488.imageshack.us/img488/2...shot0421za.jpg
I suppose the rev.A1 should be written on the pcb of the board...right??
My board is excaxtly the same at the specs....
http://i7.photobucket.com/albums/y25...AOPENspecs.jpg
but rev.A00..:(
http://i7.photobucket.com/albums/y25...S/AOPENrev.jpg
so VCCA mod wasn't totally useless....
good :) atleast I don't look stupid for suggesting it would raise the wall :D
Quote:
Originally Posted by mine
The pics are from me...............:mad:
What revision do you have??Quote:
Originally Posted by AndreYang
Calm down Andre...no need to get angree cause of this...:D
i got up to 266FSB using a T2300
went up to 243 using a T2600 ES
when i used the remote control to go higher, it went to 200mhz and then locked up. I havent had time to test further.
ill test more this wednesday when i have more free time
LOL :banana:Quote:
Originally Posted by AndreYang
and what is the different between A0 and A1?Quote:
Originally Posted by AndreYang
Quote:
Originally Posted by Chri$ch
Some people say A0 is ES rev. and oc to high FSB.
A0= Bios 1.00
A1=1.02
and andy ??Quote:
Originally Posted by AndreYang
do you know is there a new 01 or is this just the normal aopen box
saw it in a taiwanese forum :-)
oh the world is getting smaller and smaller
Quote:
Originally Posted by GoriLLakoS
All A1..........
By KUBOKUBO under LN2
CPU Voltage Setting： 1.5000V
DRAM Voltage Setting： 2.15V
NB Voltage Setting： 1.675V
CPU Clock@boot： 235
modPI 1.5 XS 1M: 16.969s @3562.4MHz （FSB274.0 x 13)
http://kubokubo.jp/cpu/coreduo_t2600...562_274x13.gif
modPI 1.5 XS 8M: 3m20.047s @3511.5MHz （FSB270.1 x 13)
http://kubokubo.jp/cpu/coreduo_t2600...511_270x13.gif
lol you guys are really benching hard aren't you..
so many (good) results in such a short period lol.. :D
can anyone do some cleaning or put all of the screenshots in the beginning is getting pretty hard to follow this thread.
regards and great timings
By CAL930 under DICE
Too bad Dry ice was run out @FSB269MHz...
modPI 1.5 XS 1M: 17.422s @3472.7MHz (FSB267.1MHz x 13)
http://cal930.sakura.ne.jp/cgi-bin/c...b267_17422.png
@Waus-mod
Please update the records in the front page.
Thanks.
All first day batch from NE are A1...
A few stuff to test:)
http://img93.imageshack.us/img93/339...shot0910br.jpg