How did you get your ballistix?Quote:
Originally Posted by eBoy0
Printable View
How did you get your ballistix?Quote:
Originally Posted by eBoy0
Says in the original post, i got them direct from crucial.Quote:
Originally Posted by thunderstruck!
IE, he phoned them and asked to purchase from a rep.Quote:
Originally Posted by eBoy0
Btw eBoy, how are they fairing?
IE, he phoned them and asked to purchase from a rep.Quote:
Originally Posted by eBoy0
Btw eBoy, how are they fairing?
Psu blew up so i'll get testing sometime next week when my ocz 600 gameredition comes in.:)Quote:
Originally Posted by EnJoY
All i know is when i was doing my DICE runs, they did 255 2.5-2-2-51T 2.66v on my venice MC.:slobber:
Holy :banana::banana::banana::banana:. Very nice. Who the hell needs 280mhz+ 3-3-3 when you might be able to get 260+ 2.5-2-2! :DQuote:
Originally Posted by eBoy0
Indeed, i'll definately test the diffrences between running loose vs tight timings, ect.... though USPS is taking their time and getting my 520W back to OCZ... shipped on the 2nd its the 6th now... priority my ass.:stick:Quote:
Originally Posted by EnJoY
ozzimark sorry buddy, I can't seem to get a focused shot of the sticks close up... i'll try to get a hold of a better camera.
Anyone got a link to the thread with the bad batches of Ballistix in it?
Mine are CL1115N.2Q, I've started getting lockups which I could cure for a day at a time by raising vcore or relaxing timings or reducing CPU speed, but now I can't get through one pass of memtest at stock without a lockup. No errors yet, though. It might be the mem controller but I'd be surprised.
With my first Expert board, these sticks did 320 MHz 1:1 3-3-3-8. The board blew up within 4 hours lol. It was Chuck Norris RAM back then.
Thanks. 16TD1s are looking good.Quote:
Originally Posted by LlamaOfDoom
Hei everyone, this is my first post at XS, but have been floating around the forums for a while now. I am also quite active over at OCC.
Time to get my OC in here :)
2x1GB G.Skill PC4000 HZ, these are 604's
I can get soem SuperPI32M this weekend, but I think OCCT works as well:
http://img407.imageshack.us/img407/1...nstable2th.jpg
and no, I don't have CPUZ validation YET, will all go up this weekend!
I am very happy with these HZs, for 165$ the only thing I can say is :woot:
Welcome to XS and nice ram!:D
btw, that was 1T, 2.75Vdimm, don't have a program to check voltages on that MSI K8N Diamond Plus.... will test on my DFI on the weekend
and thx Celcius :P
Hasn't Crucial stopped selling this particular set for good? I can't believe it's as easy as calling their 1800 number and asking to buy a pair of 1GB Crucial Ballistix sticks. Prove me wrong if I am.Quote:
Originally Posted by EnJoY
It isn't that easy, you have to ask nicely. ;)Quote:
Originally Posted by Nocturnal
He's been proven wrong already ;)Quote:
Originally Posted by EnJoY
Got any results yet Eboy0? Please post them as soon as you get some. My pair should be arriving hopefully before the weekend so I can post my results.:) I can't wait!!
Tommorow my psu arrives, testing will then begin.:YIPPIE:Quote:
Originally Posted by thunderstruck!
So tell us about it! Mine arrived today and they are labeled ".16TD1". After 5 mins of memtest #5, I decided to do a 32M run. So far, my pair are not to shabby.:D ::cheer:Quote:
Originally Posted by eBoy0
EDIT: BIOS is 11/14, so no ODC option.
Loop 16
http://img103.imageshack.us/img103/2...026v0de.th.jpg
Finished
http://img475.imageshack.us/img475/5...026v4cx.th.jpg
These results already surpass my old kit of HZ. And these sticks run a lot hotter, so I had to use a bigger fan. I didn't include a tweaker shot because everthing is stock. DS/DDS: Auto/Auto, Tref = 3864 (100mhz, 1.95μs), and Vdmm = 2.6v in bios (Stock, didn't try lower one) One thing that's strange is that A64 tweaker reports my DS as "normal", but I will find the right values once I really push the ram. I have NO idea how Micron -5B D works, so I have a lot to learn. Any TIPS?
Ummm AIM me sometime, mine do 300 atleast, didnt have a problem running 3dmark at 295 2.66v, these chips run sort of diffrent than my Mickeymouse batch, i think his are real Micron- D since they need 3.0v to do that speed, these are diffrent chips.
Results coming this weekend, setting chiller up right now.
I got em running 265 3-3-3-4 1T 7/02 bios, 2.66v
GL dude.
These ballistix are really giving me a headache. One minute they pass 32M, the next minute they don't. It refuses to post at most drive strengths/data strengths sometimes, and other times it will. Really at a loss here.:confused:
I dont really mess w/ any of the settings in bios besides the big 3, i never really messed w/ drivestrength either.
Most of the tweaking is in windows. What clocks are you at now?
Well, I memtest fine at 300mhz, but not windows 32M stable until at least 287mhz. That's at 2.6v. I had to up vdimm to 2.7-2.8v to pass memtest at 300mhz, but windows is another story:rolleyes: . So your DS/DDS is at auto? How about tref? (PM?);)Quote:
Originally Posted by eBoy0
here is my 2x1GB DDR400 Kingston Value RAM using UCCC chips's (0552 + 0549) result :
Other specs are same with my signature :)
Max on 2.8v, don't wanna try higher for 24/7. Running my 165 at 2.9G, using the 180 divider until I get water hooked up.:(
Loop 8
http://img56.imageshack.us/img56/887...028v8wx.th.jpg
Finished
http://img49.imageshack.us/img49/842...028v1ou.th.jpg