That's it settled then.
These reservoirs cannot take the vibrations from the pump.
Time to put this project to sleep and move on.
What a bloody waste of time and effort.
I think it's time primochill recalled and refunded these things.
Printable View
That's it settled then.
These reservoirs cannot take the vibrations from the pump.
Time to put this project to sleep and move on.
What a bloody waste of time and effort.
I think it's time primochill recalled and refunded these things.
damnit...Quote:
Originally Posted by The Byter
Mine is still dry, but I've got it very-soft mounted (<<10Hz). What setting were you running the d5 at? I was right at the point of having enough confidence in it to take it out of my bench setup and put it back in a case. How did you have it mounted?
DB, how did the t3 in the green nvidia case pictured on the cover of cpu mag hold up?
Man, t3 is such a disaster. Great design, very wrong material :)
Is there some other moldable plastic which is less fragile than this?
Also, do other acrylic reservoirs use a different glue, which is not affected by ethylene glycol? Only PC mentions that EG is bad for their res.
that was a Danger Den res. I have a Typhoon III in my Skulltrail server at the clinic that is not leaking but it looks like it has a couple small cracks on the top screws. I have a DD res to replace it when I have time to do so.Quote:
Originally Posted by meanmoe
I'm sorry, but I'm not seeing enough info to convince me that that is a rev A...and I learned a long time ago to not take anything at face value on the net. I know a few ppl that would love to see the T3 be written off as a huge failure and would stoop to some scummy tactics to achieve their goal. I'd like to know what coolant was used, How long the T3 was installed before the damage occurred...and most importantly, I'd like to see the package label the T3 came in.
Yep, mine is the same way. I started to really look at it when I pulled it out after my PrimoChill fitting broke on me. (Pretty certain that was partly my fault as it seemed I did tighten it a bit too much. :shakes:)Quote:
Originally Posted by DarthBeavis
I can see cracks forming around the screws myself. The res still didn't leak at least. It probably would have sooner or later though. :(
Well, guess I will wait a bit longer and see what happens. I was thinking of RMA'ing it, but if they are still having issues I may just end up trashing it.
After seeing stock at my favorite e-tailer.... (and thinking issues are behind us -also it must be a rev-A) I ordered and installed 4 days ago...Still running my rig sitting in a huge casserole dish in the event of any leaks...but so far so good.
I have some other issues like I'm surprised at the weld joint - looks amateurish (uneven and lots of bubbles in it) but you can't see that when mounted in the case - so not sure how much of a issue this is.
Looks like a well thought out design...just the materials and/or manufacturing.
4 days isn't enough time to make a statement....but not a drop anywhere - love the design I have to say.
Where is the premium version made of the same delrin material that the split window version is made from?
Geno never sold that design to Primochill so they won't be making it, the last I heard, Geno was still planing on shopping the design to other companies.Quote:
Originally Posted by DTR
such a shame, great design but horrible execution
I heard Thermaltake offered a mint for the design and material spec sheet of the defective T3s as they would be great fit for the existing TT product line.Quote:
Originally Posted by Waterlogged
that would be interestingQuote:
Originally Posted by DarthBeavis
I should mention that Primochill included optional (thicker) o-rings that I'm using with Bitspower 1/2 barbs - and no leaking at all.
I tried the ghost fittings but if you have to remove them...I found that the collar of the ghost fittings was binding with the tubing (Primoflex) and made it difficult - so switched to the bitspower barbs.
Also used the include o-ring (w/ reservoir) for the pump (thinner) than the thicker one that came with the pump.
Biggest issue off the top of my head (4 days in) is the non-standard mounting screws - with an incredibly small allan key (must be the smallest one) - smaller that a 5/64. If you lose these tiny screws...you cannot use any standard (computer type) replacement. So if it drops while trying to put it in...your going to spend 10 minutes looking for it.
These are just my unedited impressions - still love the design and function - mostly since my unit is not leaking :)
Edit: Running my pump (Swiftnets MCP655 (D5)) on # 3 setting
Quote:
Originally Posted by DarthBeavis
My bad - wrong acrylic bay res ;)... I had the magazine sitting in my living room. My son ripped the cover before I got a chance to really see it (w/o the rip). The skulltrail would be a terrible thing to lose.
Like I said. The tissue under mine (rev.A) is still dry, ~460hrs now. And as far as I can tell, no cracks. It's a very very soft mount, distilled + 1/10th dose of utopia (it's all I had after all the leaking, and replacing).
I want this to be it. I love looking at it... with the black facplate, little white led, and gentle hum of the D5... Mmmm sex.
EDIT: I run between setting 2 and 3. 3 is really too noisy for me open-air.
I keep hearing it is Vibrations from the Pump, so I used little glue backed FELT TABS on the bottom of my res to dampen the vibrations and so far both the original and the rev A have not cracked on me. But the first one did rust out on the fill port screws. The Rev A has plastic fill port screws so no rust and thats one step forward.
I don't know if the felt pads will help, but I know they won't hurt either and I can't feel much in the way of vibration either.
I have placed my bluray drive under my T3 and sandwiched a sheet of bubblewrap covered in felt between the two and no problems at all.
The bluray drive is now supporting the T3 and pump.
Before The T3 and pump were only supported by the screws at the side.
I think not having the T3 use the case rails in my cosmos s have affected the stability of it.
Excessive I know but necessary.
No cracks or leaks yet!
Tbh, considering how bendy and unstable some cases are today, I'm not surprised that a hard plexi part that is screwed tight to it will crackQuote:
Originally Posted by Barso
i'm sure if you made a tray styled thing out of alu and screwed it into the drive bay and had your t3 sit inside it with some padding it would be a solution?
Well this kinda bums me out, but Primo has had some time to work this out. I've still got well over 2 yrs. on my warranty.
It seems my T3 will never go anywhere but my bench. I'll just never trust it up in a case.:shakes:
DB, I'd get that thing out of your most awesome of Vet servers ASAP.
Love your sense of humor on this, my only enjoyment on reading this thread.:yepp:
Why "bench only"? I'd think that if it proves itself over time that you'd be willing to trust it and put it in a build.Quote:
Originally Posted by the finisher
Perhaps yes, time will tell. but I've moved on to other solutions as mine is an original w/top port. Vapors original 8 port fell apart all on it's own, he never mounted in a case only Velcroed it to his test bench.:shakes:Quote:
Originally Posted by Waterlogged
Like I said time will tell, I have 0 in confidence in my current T3, every time It seems like it's fixed, It seems it's not.
I will not attempt a rma till I think It's fixed. I'm not going on just 1 poster on this, I have this thread pushed to my mobile, and follow w/great interest.
Well, 1 negative poster is all I've seen so far concerning the Rev A, and they haven't really given quality details so....Quote:
Originally Posted by the finisher
I agree;) Rev. A could be OK, I hope so, I wish no ill will on Primo. As they appear to be working hard on making this good:)Quote:
Originally Posted by Waterlogged
My 8 port is still working fine :confused:
The acrylic at the case mounting holes is starting to crack though and it's never been mounted in a case...but no leaks yet fortunately.
OK think I misread.:shrug: I'm going back to reread, thanks for the update on current status of yours.Quote:
Originally Posted by Vapor
Edit: Reread, good to know it has lasted 1 mo. w/the cracks, but still not leaking. I still wouldn't have it up in a case though.
Yeah, sorry if it was confusing. It's still alive and well but it's showing warning signs :(
It's going away when I upgrade my testbed, just to avoid catastrophe :)