I might end up getting it and trying. Just to feel a little safer, I might end up using this Artic Adhesive to fully secure it.
What do you think?
Printable View
I might end up getting it and trying. Just to feel a little safer, I might end up using this Artic Adhesive to fully secure it.
What do you think?
My god !!Quote:
Originally Posted by Tyke
Why not use the Evercool heatsink+fan ?
Maybe with your watercooled cards it's OK, at least when you can get some flow over it.
Behind 3 aircooled GTX280 boxes passiv = no go.
If you want a fan this looks even better.Quote:
Originally Posted by Justifire
http://www.enzotechnology.com/slf_1.htm
As you say with WC cards I am OK with passive. Will try the Evercool tomotrrow.
This one?Quote:
Originally Posted by Justifire
Is it big enough to cover the middle (main) part of the SB?
That's the one I've ordered. Should be here tomorrow.Quote:
Originally Posted by slim142
Like I said on PM, please dont forget to post a picture once you get it installed :)Quote:
Originally Posted by Tyke
Hi,
anyone a Idea how can i bring up my CPU up to 4.5 GHz +
(CPU and NB was Watercooled with Mora Pro 2 and 2 Fan Radiator)
at the moment it runs at 4.3 GHZ with Multi 13
and
Vcore 1.42V
VTT 1.16V
PLL Auto
GTL 1+4 +28mv
GTL 2+3 + 26mv
NB 1.46V
thx and sy for bad english
Yes, and it's installed on the pics i posted before.Quote:
Originally Posted by slim142
God how come I didnt notice this!Quote:
Originally Posted by Justifire
But just one question, on the first picture it looks like its really tall. Tall enough to make the middle slot useless for Tri-SLI.
How did you make your middle card fit?
Also, is that heatsink good? what are your temps for SB? Is it crooked or angled?
[QUOTE=slim142;3145523]Im tellin you, I dont think there is anybody here able to run 1T. You wont get a huge drop when using 2T, but you gain a lot more stability. Give 1600Mhz 2T a try.
??? I've been running 1T the whole time, I never crash or have any problems.
Computer runs 110% :up::up::up:
[QUOTE=TheHardCase;3146124]1T 2GB okQuote:
Originally Posted by slim142
1T 4GB I think is an issue.
SlimQuote:
Originally Posted by slim142
The Evercool is a great fit. It fits straight, and is rock solid. Temps look good. Tri Sli is no problem, there is about 1mm clearance from the middle card! :up:
[QUOTE=Trigger5521;3146210]My memory runs 1T fine at 1600MHz. pretty good for 2GB sticks.Quote:
Originally Posted by TheHardCase
Hello there,
Can anybody tell me best bios i am on 704 at the Mo and still getting the old random game crashes:mad:
spec Q6600 @ 3.74
reaper ram at 1150
2x8800gtx
The overclock is 12 hours prime stable nice temps just random freezing in games not system crashes:shrug:
Cheers
Yeah, I just noticed that from Hard Case :p:Quote:
Originally Posted by Trigger5521
But between 2Gbs 1T and 4Gbs 2T, I think the choice is pretty obvious :)
You dont know how happy I am from hearing that! Do you have a number (temp) by any chance?Quote:
Originally Posted by Tyke
Slim, if you need further convincing about the evercool, see mine below:
http://img297.imageshack.us/img297/6...edresiznp3.jpg
Fits fine, and should have clearance from cards - ive used it in SLI setups before and height isnt an issue. The only thing to be aware of is the lug/catch on the white PCI-E slot gets in the way a bit, but u can bend it out the way a little and that sorts it. :)
Mike, that is just what I needed!. Thats a nice setup! :up:Quote:
Originally Posted by MikeMK
Now that I see your motherboard, thats how I want mines to look!
Thanks for the picz :cool:
I tried 1.92v, and I don't see any improvement.... it is already 0.12v above the safety limit and I don't want to go any further.Quote:
Originally Posted by Trigger5521
And it is completely stable at 4037 MHz / 1700 MHz, 10 hours of 3DMark06 + Orthos + Bittorrent and still going. VCore can be reduced to 1.33v too, temp looks much better.
There were some false alarm though, Crysis has antifact and random crash, it turned out to be due to Beta Forceware driver 177.40 and 177.66. Back to WHQL 175.19 and all is well.
I don't know why, seem you guys these Beta driver to solve the SLI issue, even at stock. I don't have those issue, instead it was these beta driver which give me issue.... not only in Crysis, but general performance is bad also.
For Justfire
Heya man, just wondering if you wouldn't mind posting your BIOS specs for your setup. Still tryin' to hit 4ghz+ stable..getting ever so close but it seems this bad boy needs lots of voltage.
Cheers :cool:
P.S. By all means if anyone else with a QX9650 wants to post some 4ghz+ specs, have at it. :D
Hey seem you have my problem, do you have problem watching video too?Quote:
Originally Posted by hyb
Seems 804 & 901 would both be very wise choices, best experience has been with either. Try one or the other, doubt you'll go wrong. :)Quote:
Originally Posted by hyb
I upped the voltage to 1.6 and in the bios the temp was 32C. This was obviously at idle as I have not loaded windows yet.Quote:
Originally Posted by slim142
Perhaps you and I need to meet up for more than PC things ;)Quote:
Originally Posted by Tyke
My ride :D
http://i89.photobucket.com/albums/k2...O/DSC00037.jpg
I am also thinking of going down the water cooling route, so all this info is helping me out.
No probs Slim, I'll post some pics when its all finished... just leak testing atm. Good luck with your watercooling!Quote:
Originally Posted by slim142
0901 seems to have addressed the corruption issue successfully.Quote:
Originally Posted by TheRoyalty
So far it's been #1 for me (finally).