I keep it in a separate room since they are too loud.Quote:
Originally Posted by pcaddict
Printable View
I keep it in a separate room since they are too loud.Quote:
Originally Posted by pcaddict
Here is my play rom atm :-)
http://dl.dropbox.com/u/59552/IMG_3703.JPG
You guys are crazy with your multi-monitor setups. Are those 24"s?
Finally got all main parts watercooled :)
http://img235.imagevenue.com/loc74/t...7_122_74lo.jpg
http://img165.imagevenue.com/loc463/..._122_463lo.jpg
http://img46.imagevenue.com/loc441/t..._122_441lo.jpghttp://img150.imagevenue.com/loc245/..._122_245lo.jpg
http://img287.imagevenue.com/loc501/..._122_501lo.jpghttp://img221.imagevenue.com/loc872/..._122_872lo.jpg
Before:
http://www.upload.ee/thumb/845205/Temp_before.jpg
After:
http://www.upload.ee/thumb/845206/Temp_after.jpg
Before with the fan, chipset temps got to 65-70c IDLE!!!!! srsly cant ASUS make a GOOD stock heatsink for their extreme boards?:
http://img258.imagevenue.com/loc152/..._122_152lo.jpg
Before without the fan, temps got to 85-90c IDLE!!! :lol: I mean wtf, the thermal paste i replaced with MX2, temps got sooo hott... INSANE. ASUS should friggin start making good chipset coolers like Gigabyte.
http://img277.imagevenue.com/loc65/t...e_122_65lo.jpg
I'm trying to figure out what's going on in each screen.......
Nice! That must cost you an arm and a leg for that SSD aloneQuote:
Originally Posted by lowfat
Yes 3x 24 and 1x 19 inch screen.Quote:
Originally Posted by vengance_01
the thing is what the gpu card setup i can only see 1 bridge conector on the cards so is it 3way x-fire or something i dont know how the radions work with multy gpu's or is it sli with seperate physxQuote:
Originally Posted by lowfat
sweet rig by the way cinda want to water cool my rig dont have the confidence to do it :)
3x GTX 460 for folding (F@H I think).
Indeed it did cost me quite a bit of money.Quote:
Originally Posted by pogiman
pcaddict is correct. It is firstly used for folding@home and gaming secondly.Quote:
Originally Posted by rubber5
the thing is how is the pc running the 3 cards i thught you had to have a sli brige across all the cards to use them properlyQuote:
Originally Posted by lowfat
Probably 3 to do the rendering, 1 for physx.Quote:
Originally Posted by rubber5
I don't game with all three. Just the first two do 3D. The other one just runs folding@home while gaming still.Quote:
Originally Posted by rubber5
cool i did not know you can do thatQuote:
Originally Posted by lowfat
it just shows you that you can lern something new everyday
I didnt know that either. Now you can truly get F@H 24/7!Quote:
Originally Posted by rubber5
just wondering is there a really good 3rd party cooler for the gtx 470
i had a thermalright cooler for my old gtx 280 but after i fitted it the memory got so hot the screen wold go brown after i put the stock cooler on about 2 weeks later the memory went down
i reall dont want that to happen again
my 2x 470 can hit mid 90s under gaming at 100% fan and i dont kno what to do
any ideas peapole
Fix your case cooling? Don't overclock so much?Quote:
Originally Posted by rubber5
That is very odd. You have the HAF X which should offer more than enough cooling for even 3 GTX470s..Quote:
Originally Posted by rubber5
Did you overvolt it of some sort?
Anyways, this will be a good aftermarket cooler for the Fermis.
my cards are at stock and i have the coolermaster haf-x case like lkiller123 sead so i know thair is plenty of air flow i just dont know what to doQuote:
Originally Posted by pheonix991
no overvolting i dont even touch them at all with settings
My new grafics, ecs gtx460 black. Now, all fans powered by artic cooler
http://img256.imageshack.us/img256/5365/s5033107.jpg
Uploaded with ImageShack.us
http://img412.imageshack.us/img412/5919/s5033109.jpg
Uploaded with ImageShack.us
Both at the same temps? Are you sure they are at 100% speed?Quote:
Originally Posted by rubber5
You might consider RMAing them.
i took the heat sink off and relaced the tim with artic silver 5Quote:
Originally Posted by lkiller123
when im gaming the fans are about 60-70% and the temps hover about 80-88c
but thay are no ware near as loud as thay were
is the cards going to be safe at these temps now do you think
i am thinking of watercooling
but i dont know what sise rad i will need for 2x gtx470 (no overclocking) and a
i7 920 @3.8ghz
i know peapole say go for 2 loops but i priced it up for a single loop and its going to cost £420
ps i have the haf-x case from coolermaster and i can fit a 120.3 rad at the top and a 120.1 at the back
so i can technicly fit a quad rad im my case will that be enugh
(thats the price for the setup is 120.1 rad 120.3 rad 2xblocks for the gpu's
cpu block and waterpump+sump and all the fittings and piping all of it from scan computers)
its alot of money but is it really worth it so shal i go for it or not
FRedzzzz can we get a pic at night with the cathode turned on?? THat's very similar to what i want, i'm going to sleeve everything white and black, already removed the yellow Corsair sticker:D
Already have the 120MM black and white fan, just waiting for Sandy BRidge to get a bigger cooler that will fit with it. :up:
Yes, this my old system within gtx 285Quote:
Originally Posted by Kingcarcas
http://img338.imageshack.us/img338/646/s5033096.jpg
Uploaded with ImageShack.us
Modded Lianli PC-A06B with 6 hdd slots for my server :D
http://koti.mbnet.fi/ipe91/b/2.JPG
Nothing really fancy here. Had to remove the "light" from the front panel of the case to impove airflow a little.