Venice 3200 LBBLE 0525 CPMW using an XP-90 and a sanyo-denki.
http://img242.imageshack.us/img242/5...wbal9mc.th.jpg
Printable View
Venice 3200 LBBLE 0525 CPMW using an XP-90 and a sanyo-denki.
http://img242.imageshack.us/img242/5...wbal9mc.th.jpg
I finally got my new mobo today and after some quick testing i got this at stock volts..
validation link
Regards
Btw the ram is just at 1xx mhz cuz its bh5 and i dont got the ddr booster or voltmod... and i cant find my beloved tccd's :mad:
Does anyone know. Is this good stepping for 3200 venice? Thinking of buying one from a guy for $115. Thanks.
LBBLE 0516EPGW
3200+ E6 Venice can anyone tell me anything about these. How high you have got them to overclock...
ABA3200DAA4BW
LBBWE 0529DPGW
I am right now at
2.4 @ 1.45vcore.
Asrock 939Dual-Sata 2 OCWB beta 2 bios
Havent done any vcore mods so 1.45 is the highest I can go. Thinking about going ahead and doing the mod.
Running danger den water cooling... current temp is 25C.
Thanks
Have been offered this stepping
Opteron 146 cabye 0536 gpmw.
Is this much better than my CABGE?
I think you got the wrong thread. This is venice thread. Theres an opteron thread you should ask.
But the answer to your question is yes. CABYE is good. CABGE = BAD
Quote:
Originally Posted by mbm
Lets see a prime screenshot of 2.8ghz for 6 hoursQuote:
Originally Posted by x3ro
I found E6 Venice 3200 with this stepping 0533 BPBW,are this good stepping ?
Here's 24+hours prime at 2.8 with venice in my sig. Might be selling it now that opty is looking to be a better chip.Quote:
Originally Posted by laydback
If you are selling it, let me know.
Haven't decided yet, maybe in a couple of weeks.
Can someone give the best Venice weeks after 20th week.
As i cant find the beautiful 17th week here in India now.
Will be using it with a DFI Nf4 Ultra-D
Will be cooling it with a XP90 or a SI120.
Wanted a 3000+ Venice which will atleast OC till 2.9Ghz
Please Guys i am completly relying on you guys for this info.
Also if its posted in some thread please post the thread that would also be useful.
Earlier i had seen a Venice Core Database thread where many people with there
15,16,17,18th week venice had posted there max oc's on air , water & ln2.
Got a prime95 question for someone. Ocing my 3200+ venice on my Epox 9npa+ mobo.
Trying to OC at 2.5ghz right now. I am at 1.55 volts. It was the same error with 1.5 volts. I just did 10x multi with 250 frequency. Ive tried it with HTT at 5x, 4x, and 3x. All similar errors. Memory is relaxed right now at SPD settings. Which is 3-3-3-9 2t right now at 2.7volts(to rule out memory problems. My memory is Corsair XMS 4400C2PT which is TCCD. So its not the memory...
What does this prime95 error refer to? CPU related? Voltage? Memory?
Test 1, 400 Lucas-Lehmer iterations of M11922945 using 1024K FFT Length.
FATAL ERROR: Rounding was 0.4999991484, Expected less than 0.4
Hardware failure detected, consult stress.txt file
Hi, my clockgen for nf3 just stopped reading the correct cpu clock, it shows amzingly high clock speed :( What can the problem be? CPUz is working fine tho.
I will now reinstall my nf3 drivers. Still reporting wrong numbers.
Here fooling aound on my dad's new computer. It's a A64 3200, ASUS A8N-E, 2x512MB OCZ Premier setup. Just doing some SuperPi 1M runs with 1.525v (BIOS), and this is my best so far. Also, I can't seem to get any better then around 2.65Ghz Prime95 stable even with extra volts (i.e. I get the same result with 1.475v), and I get the same error as "FallenGod". Then again, given my dad probably won't be using this for anything other then offic work, I think that's more then enough, lol.
Oh, I didn't get a chance to see the stepping before the CPU was installed :(, but afaik it's not that great. This is one of the AMD Tech Tour chips.
One other thing, this is on WinXP x64 Pro.
http://valid.x86-secret.com/show_oc?id=48403
I've had my system for a few months now and everything seems fine except the odd problems from CSS / HL2 which I believe are related to their rubbish updates. Anyway, aside from that all is well.
Does anyone have any idea how far I would be able to push my system?
Everything is in my sig except this: - LBBLE 0516 DPMW
I played around with overclocking a few months ago but didn't have the time to do all the required testing so I left it for a while. Anyway, I have a bit more time that I can spend doing some benchmarks and tests and leaving it running Memtest and Prime so all I need now are a few pointers to some good primers relating to the Venice's.
If anyone has any experiance with a similar week Venice 3500 then your comments would be greatly appreciated.
Thanks
Quote:
Originally Posted by Quad Master
I can get you about 40 (yeah 40) 0517APAW for $219 USD/each if you really want, i'm sure shipping to india is no problem.
http://img487.imageshack.us/img487/3...p32m8vf.th.jpg
http://img487.imageshack.us/img487/6...sp1m5eo.th.jpg
http://img324.imageshack.us/img324/6...able3cq.th.jpg
hawkeyefan really nice chips you got there!!!
2.7-2.8 with only 1.65Volts and ONLY for 217US$.... :stick: :stick:
Anyway...Not my business
Take a look at this chip.Its a decent overclocker but cant get high enough for me:( waiting for opteron 146 CABYE 0540 :woot:
Venice 3200+ 0517 BPEW
24/7 stable @2820 1.48V
Bench @ 2930 1.61V [Vcore is a bit higher than it really needs]
OCZ pc4800 platinum ltd edition @ 1:1
IMC tested @ 9x300 2.5-4-4-10 1T
Take a look some pics [random cpu speed]
29sec Spi 1Mb [I need some BH/UTT ASAP:)]
http://img142.imageshack.us/img142/767/10x2939fl.th.jpg
Sandra arithmetic 10x290 [Memory 1:1]
http://img481.imageshack.us/img481/8...etic0uk.th.jpg
10x282 S&M stable
http://img481.imageshack.us/img481/1189/28208ft.th.jpg
10x280 1:1 [4+ hours Memtest error free]
http://img256.imageshack.us/img256/2...test6uq.th.jpg
hi guys, i have a 3200 venice DH-E6 for what i read this steping suks but mine its ok , i can get 2500@vcore default and max stable 2750mhz@1.6v -
PICS:
>>2500@vcore default :--http://img278.imageshack.us/img278/1702/140v6xt.th.jpg
>>2800@1.63v:-- http://img19.imageshack.us/img19/5377/28001lh.th.jpg
Quote:
Originally Posted by ALXgr
hehe, I've seen people pay a lot more for a lot worse. look at it this way, I got an (almost) stock FX-57 for ONLY 219$ ;)
also those are not "my chips", the only time I've ever dealt with the retailer who has them is to buy this single chip
here are best benchies so far, also figured out that I was using too much voltage to get stable at 2763, memtest was passing in DOS but found out the hard way it was not Windows stable...you live and learn
SP 512K 2907mhz @1.678v. Can get SP1M @2989mhz but not higher. bah.
http://img463.imageshack.us/img463/3...512k7rq.th.jpg
stable 2700mhz @1.534v
http://img463.imageshack.us/img463/3...ours3rz.th.jpg
SP32M at my 24/7 settings. hehe, go crappy value ram! :cord:
http://img463.imageshack.us/img463/6...p32m3zo.th.jpg
My current max on wc:
don't look at voltage ;)
http://img120.imageshack.us/img120/3161/10520pf.jpg
cpu in sig, xtreme air cooling
http://valid.x86-secret.com/show_oc?id=51242
Hi everybody,
I saw that somebody used a sse3 patch,
isn't this cheating or is this always in superpi,
someone just explain it to me please ;)
xyus
how much vcore did you have to throw at it ?Quote:
Originally Posted by Celcius
about 1.71v-1.72v:(Quote:
Originally Posted by Burnt_Ram
3000+ E6, no great shakes but still nice at 2G4. Does 2G5 SPi32 but won't prime. Hits the wall after that; volts make a marginal difference.
http://0wned.org.uk/pics/shots/venice2g4.jpg
atm I'm running 2530mhz @1.53, 16 hours prime, (vcore can go lower!!)
just burning cpu in.
but I have to switch to 2T approx 288htt :(
cpu is a 0528GPFW E6 +3000
I'll post a pic once I've reached 2600mhz prime stable at a low vcore. (1.5 I hope)
btw my stress temp is 42 degrees with air atm :) quite good in comparisson with my s754 newcastle what was +60 degrees. after a couple of minutes toast.
Xyus
Yay! There's life in the olde Venice 3000+ E6 yet. With a Vapo LS, I've been priming at 2.7 GHz, 1.495v dmm reading, -17C to -9C. I tried to go 311 x9 for 2.8 but trashed a Windaz system file on boot - the A8N32 goes a bit funny when booting with the 0.2v overvolt facility apparently, so might have tried initial boot at 1.3v, which is not a winner.
I'll clear down the CMOS tomorrow and see if I can fix it. Still, it's already more than I expected.... 50% OC, just like an E3 ;)
CPU: Venice 3000+ LBBWE (can't remember the assembly date..) @ 350x8 (2800mhz)
VCore: 1.625V (1.45V +10% on my Neo2)
Cooling: Air, SLK-948u + 80mm 3k RPM fan
Temps: 40C idle, up to about 50C on load
System: Neo2 PT (BIOS v1.8NFM 1T mod), PQI Turbo TCCD 2x512 memory
Stability: overnight (about 6 hours) of Prime95
I haven't found a decent setting/divider for the memory yet, so benchies such as SuperPi would be pretty pointless, the memory is at 1:2 right now (175mhz 2-2-2-10 1T).
http://img505.imageshack.us/img505/1...nice2lk.th.jpg
Does anyone knows which is the "good stepping" for 3200+ at this moment?
My Venice 3000+ can run 2,8ghz vcore 1,475volt with stockfan stable SPi 32m
http://img.techpowerup.org/060109/2,8ghz.jpg
Does anybody here have a socket 754 Venice?
Heard someone smth. about 30week Venice? I have it but overclocking is so little - 2600Mhz @1.7voltage by Tt BigTyphoon. I just wanna to by Operon144. Mem Hyndai D43chips 474MHZ 2.5-3-3-7timings.
Check my sig (old rig). Priming right now at 32C. It's a pretty nice chip; wish I had a better mobo and ram for it, because I'm sure it would really fly. BTW, Vcore is 1.44v.
http://www.0wned.org.uk/pics/shots/s754ven-2.6.jpg
My new 3500+ under cold water(cpu @ 9°)
3030 mhz with 1.648V:
http://valid.x86-secret.com/show_oc?id=63936
SPI 1M @ 2904MHz: (512MB in single channel memory timings not aggressive)
http://img61.imageshack.us/img61/574/spi29047nf.th.jpg
Waiting for VAPO LS.
http://img313.imageshack.us/img313/3...pset8av.th.jpg
Received today my OCZ Gold VX.
A Spi update with iced water:
SPI 1M @ 2926MHz=28.656
http://img385.imageshack.us/img385/7...29267gv.th.jpg
Win XP+SP2
here is a valid...voltage isnt stable , because i have a unreal 300 watt psu.:slapass:
stock cooling , c&q is off , cpu core is about 30 C. if i have a good psu and very well cooling i can pass by 3200 mhz :stick:
Venice 3000+@2970mhz :cool:
http://valid.x86-secret.com/show_oc.php?id=65496
:cool:
i got a 3200+ venice with : LBBWE 0551 BPQW is it a good one?
My Venice 3000+ 0520 EPMW can run:
http://img420.imageshack.us/img420/3...01327ak.th.jpg
2809MHz @ 1.320v
http://img96.imageshack.us/img96/740...01381pt.th.jpg
2907MHz @ 1.380v
http://img96.imageshack.us/img96/761...01452ve.th.jpg
3006MHz @ 1.450v
..cooled by Pentagram QC-92Cu :cool:
Venice 3200+ LLBWE 0552APHW
1.68V@2.75GHz on stock air.
I will post some results.
Voltage scaling:
1.46V->2.60GHz
1.54V->2.66GHz
1.68V->2.75GHz
Temps with stock air between 38-48 on load & Vcore<1.54
For everyday i am at 255 & 1.43V (just to stabilize memory controler).
My s754 Venice 3000+ is very special. It's a Malaysian one and plainly these are rare - all the others I've seen are Chinese. It's an E6 revision as they all are, so-so in s939 when compared to E3, but pretty damn exciting in s754 I think.
I've been priming at 2650 on a voltage limited Asus board, 1.44v vcore (spec 1.4V), under water with the core showing 29C (Valdiadation 78417 and why don't my link work?), but if I open too many apps or the screensaver kicks in I get a crash. I blame that on the knackered 2 year old Crucial Value sticks myself, must try with the HZ or Ballistix.
What's bugging me is VVJ's assertion that the 13C thermal offset shown in CBiD works as described. 29C - 13C = 16C. If that is true, then this chip must be frickin' amazing. Like very very special. If I had the volts, how far could it go?
Edit: :woot: :woot: this BIOS.. Jeez!! any vcore up to 1.55v gives 1.46v and that's that. Then reading the Anandtech forums, there's a guy who thinks he's got a voltmod which does the same except 1.575 and 1.6 give him more.. just tried it without the voltmod at 1.575 (1012-7 beta BIOS) and got 1.52v / 1.536v fluctating. Priming at 2700 now.. no, 2750 now.. heh, lets keep going... :woot:
Thats very nice for a s754 m8 =)
SPi 32M stable 2800 MHz / 1.63v / 34C indicated constant load.Quote:
Originally Posted by neoman
The wacky K8NE-Deluxe bios goes:
(bios | indicated)
1.5v - 1.550v = 1.46v
1.575v - 1.65v = any setting 1.52v / 1.536v flux
1.675v - 1.75v = any setting 1.616v / 1.632v / 1.648v flux
It primes for a while but fails generally before an hour's passed, 35C constant. Those voltage steps a brutal and there are no tweaks to be had there. I'm trying the RAM at CPU/12 rather than CPU/15 now. This is not a fresh XP build either, like an 8 month old kludge, so maybe a new one would help. And the voltage swings aren't magic fun to be honest.
Validation: http://valid.x86-secret.com/show_oc?id=78529
Screenie (SuperPi finished @ 28m 26s):
hi guys,
this is my first post on this forum and i must say you guys are pretty decent overclockers, so :clap: to all of you.
I have recently bought a new mobo + cpu and have been playing around with it. It's a venice 3200+ with 0604.. so i think its a pretty new one. I didn't have enough money to buy new memory so i using my current 2x512 corsair 400 MHz and 2x256 crappy 400 MHz. I think i have a pretty decent overclock for 4 memory modules, check it out:
200x10=2000 MHz CPU 400 MHz MEM ( 2.5-3-3-8-2T )
267x10=2670 MHz CPU 450 MHz MEM ( 3-3-3-8-2T )
Vcore is at 1.525 V running 34 C idle and 44 C load on a Zalman 9500CU. Give me your opinion please, i think this baby can run REAL FAST if i had better MEM and only 2 sticks ofcourse.
Mine does 2.66 with 1.54V so you are very good up there.
But mine cannot do more than 2.75 with 1.68 which is the max i gave.
dude your memory is PC3500 mine is 3200, you got 2 sticks of ram i got 4 sticks, i would say , my overclock is better...
I did not say that you OC sucks.
I said just what to expect from your cpu with the info you already gave.
well, here is my sempy. its based on palermo core which is just a venice core with disabled cache. so i think it belongs here.
SDA2800AIO3BX
LBBWE 0550BAJ
does 363x8=2902 SNM stable.
watercooled. on a dfi nf3.
28c idle, 38c load. average.
http://flytek.sa3doc.co.za/screens/air3g.jpg
http://flytek.sa3doc.co.za/screens/3gprime.JPG
ada3500daa4bw
cab2e0605fpmw
1422609b60025-t
25' ambient
That has to be the best 3500 I've seen in ages - 2006 vintage again. :banana3:
flytec can you post a 32M?
It will have a good time along with BH.
Which dividers are working?
An A64 tweaker will be helpful.
10x300 with uccc@166
approximate temps
36' idle 70mm fx55fan at 3200rpm
51' loaded fx55fan at 3300rpm
23' ambient
13 hours prime95
http://valid.x86-secret.com/show_oc?id=82795
benching now :)
flytek that's one sweet 3500, I thought my 3000 @ 2.7GHz was impressive. Opterons have really stole the limelight, that chip is awesome :toast:
very nice 3500+ man :)Quote:
Originally Posted by flytek