New RAM List!!! (now with 1GB stick listing too)

Printable View

Show 100 post(s) from this thread on one page

04-19-2005, 09:36 AM
raydelee

any performance diffrent UTT on brainpower pcb?
04-21-2005, 01:58 AM
Punisher!

Quote:

Originally Posted by MonkSP

I bought Twinmos PC3200, model TMII 400 and are NOT winbond.
here is some info:

0508D
TMD7608F8E501

This only have one dot at bottom right. They perform only as high as 235 no matter what juice u give them. I tried from 2.8 to 3.5 and won'0t go any higher then 235. This new Twinmos perform a lot worse and not UTT chips

You have to look @ the part number to identify the chip.
04-24-2005, 05:12 PM
dimasdw

Quote:

Originally Posted by overcrash86

http://kubokubo.jp/memory/ld_pc3200_512mb/ld.html

:confused:

acording to that link the chip is winbond ..,i dont know what winbond

anyone test the F1-3200BWU2-1GBGH Gskill over 260 Fsb ?
<plan to buy :D>
04-25-2005, 02:01 AM
Punisher!

Quote:

Originally Posted by dimasdw

acording to that link the chip is winbond ..,i dont know what winbond

anyone test the F1-3200BWU2-1GBGH Gskill over 260 Fsb ?
<plan to buy :D>

They are on the list! You need a lot of voltage to make them overcome that barrier (more than 3,5V perhaps).
04-26-2005, 04:07 AM
dimasdw

Quote:

Originally Posted by Punisher!

They are on the list! You need a lot of voltage to make them overcome that barrier (more than 3,5V perhaps).

ok thanks, OPB has tested gskill UTT pas 260 FSB in other thread :)
04-26-2005, 02:55 PM
HiJon89

I just want to give a big thanks to everyone who contributed to this RAM list, its amazing. I can't even remember how many amazing deals its gotten me on memory, every time I see XMS or HyperX memory selling for cheap the first thing I do is ask the revision number and head on over here. You would be surprised how many people are selling BH-5/6 and don't even know it.
04-26-2005, 11:42 PM
Punisher!

Quote:

Originally Posted by HiJon89

I just want to give a big thanks to everyone who contributed to this RAM list, its amazing. I can't even remember how many amazing deals its gotten me on memory, every time I see XMS or HyperX memory selling for cheap the first thing I do is ask the revision number and head on over here. You would be surprised how many people are selling BH-5/6 and don't even know it.

Thanks! :D
04-27-2005, 06:10 AM
hoebloggs

Ive just got some "Blue GeIL", is there anyway to tell if its BH5 without using it, taking ramsinks off ect...
04-27-2005, 08:25 AM
Punisher!

Quote:

Originally Posted by hoebloggs

Ive just got some "Blue GeIL", is there anyway to tell if its BH5 without using it, taking ramsinks off ect...

Try:
stable 2-2-2-5 @ ~2,8V @ 200 Mhz --> BH5.
stable 2-2-2-8 @ ~2,8V @ 200 Mhz --> UTT.
04-27-2005, 09:07 AM
FiNcH64

was up guys

ohh very nice list dude..

how long it took you to find out the ram chips??

are you sure that the mushkin level 1 3500 are ch-5?

cause mines act like if they were bh-5 ( low timming, high frecuencies :D )

i own the silver heat spreader one`s..

any one knows the posibility of being bh-5??

also where i can find the jumper for the lanparty sli-d?' cause i wanna reach 280 mhz with thight timmings jejjee..
04-27-2005, 09:09 AM
hoebloggs

It wont do 2,2,2,X at 2.8, ahh well for £35 i cant really complain for 512mb.

its at the top right by the ram heatsink, for 3.2+ it should be on the left
04-27-2005, 10:10 AM
Punisher!

Quote:

Originally Posted by FiNcH64

was up guys

ohh very nice list dude..

how long it took you to find out the ram chips??

are you sure that the mushkin level 1 3500 are ch-5?

cause mines act like if they were bh-5 ( low timming, high frecuencies :D )

i own the silver heat spreader one`s..

any one knows the posibility of being bh-5??

also where i can find the jumper for the lanparty sli-d?' cause i wanna reach 280 mhz with thight timmings jejjee..

They could be good CH-5 :D, but I don't exclude they could be BH-5 too.
You can find it in the manual! :)
04-28-2005, 09:54 AM
FiNcH64

thanx for your answer dude

im gonna do a deep investigation , maybe at google :p: ..

i will post what i have find.. to add the list :D

keep posting guys :banana:
04-28-2005, 10:13 AM
yaska

Does anyone know what inside ocz titanium is?
04-29-2005, 10:03 PM
Punisher!

I have made a little correction to Winbond UTT perf. @ 3,4V... seeing many recent results my table was still a bit too much optimistic.
05-01-2005, 01:11 PM
TEDY

am i dreaming or what ?

OCZ EL DDR PC3200 DC Value VX (OCZ4001024WV3DC-K) (3-4-4-8 @2,6V) --chip--> Windond UTT (relabeled as OCZ VX) ~ Brainpower PCB 808
2*512 only 119$ at newegg ????
05-01-2005, 01:17 PM
TEDY

punisher :

http://www.oc-wear.de/pd1111585212.htm?categoryId=27
05-01-2005, 08:40 PM
Punisher!

Quote:

Originally Posted by TEDY

am i dreaming or what ?

OCZ EL DDR PC3200 DC Value VX (OCZ4001024WV3DC-K) (3-4-4-8 @2,6V) --chip--> Windond UTT (relabeled as OCZ VX) ~ Brainpower PCB 808
2*512 only 119$ at newegg ????

You are not dreaming! :D
05-01-2005, 08:40 PM
Punisher!

Quote:

Originally Posted by TEDY

punisher :

http://www.oc-wear.de/pd1111585212.htm?categoryId=27

Nice, I will add them soon! ;)

Thanks.
05-02-2005, 12:34 AM
raydelee

anybody tested the new BH-5 on TMSP PC3500 (DDR433)
how is the performance compare to TMSP UTT PC3200 (DDR400)
05-03-2005, 08:58 PM
pasatoiutd

Would be nice to see how the SP3500 scale (FSB@2-2-2 vs. vDimm)
05-05-2005, 11:13 AM
kamaleon

what can i spect from Geil ultra platinum pc4400?

paired with 510-sli psu, dfi sli-dr, venice 3200 and xp90.

[i cant find gskill FF 1gb anywhere.. :( ]

edit: found out they arent that great afterall :/
05-05-2005, 04:48 PM
XS944

I have some info on CL2.5 Mushkin Value RAM PC3200
It's one horrible overclocker, had to go 3.0V before I could get to 230 :(

The chips read:
SYM@X
GKDDR32M8A-5
048E

BTW, did a search and couldn't find anything about SYM@X chips anywhere

just wanted to make a contrib to the list!

--Mike
05-05-2005, 06:34 PM
longsiew

Quote:

Originally Posted by raydelee

anybody tested the new BH-5 on TMSP PC3500 (DDR433)
how is the performance compare to TMSP UTT PC3200 (DDR400)

I had read in different forum that some members managed to push TMSP PC3500 Bh-5 to 260MHz @3.1Vdimm @ 2-2-2-5
05-05-2005, 08:21 PM
NST6563

Anyone have any idea what the PQI chips with the labeling of (line by line):

PQI
DDR-333 1GB
0101-04D1
MDAC-528LA

on a Brainpower PCB # B6U808.

????

It's actually a Rosewill stick that's rebadged PQI memory (all they did was put a Rosewill sticker over the PQI sticker.) We were using it for a Carputer, but saw the BP PCB and it struck my curiosity. It was only $79 for 1Gb.
05-06-2005, 02:18 AM
Okda

can anyone confirm of those Giel are the mentioned as BH5 on the list or not plz ???

http://www2.newegg.com/Product/Produ...82E16820144305

i was thinking of geting Twinmoss but lately many said they weren't UTT so this Geil is perfect if it is the listed one

also if u can point me to any Winbond BH5 or UTT cheap ram on newegg plz
05-07-2005, 10:24 AM
hoebloggs

Quote:

Originally Posted by SaFrOuT

can anyone confirm of those Giel are the mentioned as BH5 on the list or not plz ???

http://www2.newegg.com/Product/Produ...82E16820144305

i was thinking of geting Twinmoss but lately many said they weren't UTT so this Geil is perfect if it is the listed one

also if u can point me to any Winbond BH5 or UTT cheap ram on newegg plz

Depends, theres still some old stuff floating around, i got the old stuff :mad: . It might be it might not, only way is to order some and RMA it if it isnt??
05-07-2005, 10:54 AM
TEDY

Punisher :

Aren't these OCZ all TCCDs' ?

- OCZ EL Platinum DFI nF4 Special 1GB (2 x 512MB) 184-Pin DDR SDRAM Unbuffered DDR 625 (PC 5000) Dual Channel Kit System Memory - Retail
Model #: OCZ6251024ELDCPE-K

- OCZ 1GB (2 x 512MB) 184-Pin DDR SDRAM Unbuffered DDR 466 (PC 3700) Dual Channel Kit System Memory - Retail
Model #: OCZ4661024ELDCPE-K

- OCZ 1GB (2 x 512MB) 184-Pin DDR SDRAM Unbuffered DDR 600 (PC 4800) Dual Channel Platinum System Memory - Retail
Model #: OCZ6001024ELDCPE-K
05-08-2005, 04:15 PM
dippyskoodlez

I'm pretty sure the mushkin black level II rev II is the brainpower PCB...
05-08-2005, 10:36 PM
Punisher!

Quote:

Originally Posted by TEDY

Punisher :

Aren't these OCZ all TCCDs' ?

- OCZ EL Platinum DFI nF4 Special 1GB (2 x 512MB) 184-Pin DDR SDRAM Unbuffered DDR 625 (PC 5000) Dual Channel Kit System Memory - Retail
Model #: OCZ6251024ELDCPE-K

- OCZ 1GB (2 x 512MB) 184-Pin DDR SDRAM Unbuffered DDR 466 (PC 3700) Dual Channel Kit System Memory - Retail
Model #: OCZ4661024ELDCPE-K

- OCZ 1GB (2 x 512MB) 184-Pin DDR SDRAM Unbuffered DDR 600 (PC 4800) Dual Channel Platinum System Memory - Retail
Model #: OCZ6001024ELDCPE-K

First and last are... the second not (it depends which PC 3700... gold or what).
05-09-2005, 11:54 AM
oziris1978

There are new apacer ddr500 ram modules. They use Apacer original modules:

on chips....am3a5608frt-3b

the p/n number of them is: 77.10749.644
05-09-2005, 05:38 PM
theobub

Quote:

Originally Posted by gundamit

I was standing in line over at Fry's yesterday (wanted to look for a replacement for my CBBID stepping A64 - no go) and saw that Geil PC4000 512mb sticks were still on sale for $80 a pop. Curiosity got the better of me and I purchsed a pair.

I threw them in my DFI NF4 rig and put them at their advertised timings of 2.5-4-4-7. On stick tops out at 267, the other 266. Nothing on the package says anything about voiding the warranty if I took a look under the super cheap aluminum/tin? heatspreaders so I pulled one off and took a picture.

Looks like the same GL3LC32G88TG-35 memory that was reviewed
here.

This stuff seems a lot like my Adata Hynix that I tested on my DFI LPUT, crapping out right around the same place.

Whatever it is it seems like a good deal for someone who doesn't have the volts to give to the TwinMos SP UT, or can't plow another $50 into some TCCD. Me personally, I would rather have the Speed Premiums or some killer GSkill. So what am I doing with this stuff? Curiosity kills cats like me! Darn! I'm such a :banana::banana::banana::banana::banana:! :rolleyes:

Well at least the pcb is brainpower.
;)
05-09-2005, 05:47 PM
theobub

Anyone here has tried G. Skill LE chips on a system similar to my signature (or any NF2 32bits system)?

I just ordered a 512Mb kit from newegg, and since I am in Brazil I will have to wait my friends sister to bring it to me in two weeks. :(
Cant wait to get my hands on those.
05-11-2005, 03:13 AM
CJ4

The information for the Mushkin Blues is mostly correct if they were ordered recently from Outpost/Fry's. The dual packs were with the BH die, the single packs were with the CH die. The Mushkin Blues also had about 100 pieces of BH-5 on the Jadec PCB thrown in. The older Mushkin Blues had mosel chips.

http://www.ocforums.com/showpost.php...&postcount=191
05-15-2005, 11:14 AM
nordik

Any idea what chips these use? :stick:
05-15-2005, 11:46 AM
Wired-HoH

Quote:

Originally Posted by nordik

Any idea what chips these use? :stick:

Corsair's 3200C2s have been made in 5 main revisions with multiple subsets within those revisions. Without knowing the version # and lot # of the memory, it's impossible to say for sure what IC it is. Could be one out of at least 10 different kinds.
05-15-2005, 03:20 PM
nordik

Quote:

Originally Posted by Wired-HoH

Corsair's 3200C2s have been made in 5 main revisions with multiple subsets within those revisions. Without knowing the version # and lot # of the memory, it's impossible to say for sure what IC it is. Could be one out of at least 10 different kinds.

Yeah, I was just wondering if maybe anyone ordered those from monarch. Damn revisions ;)
05-15-2005, 07:16 PM
Wired-HoH

Quote:

Originally Posted by nordik

Yeah, I was just wondering if maybe anyone ordered those from monarch. Damn revisions ;)

Problem with that is that they could have different revisions there. At best what someone else got, even if it's the same day, is just a guess.
05-16-2005, 05:19 PM
winston64

Hey punisher where does the
- OCZ EL Platinum DFI nF4 Special 1GB (2 x 512MB) 184-Pin DDR SDRAM Unbuffered DDR 625 (PC 5000) Dual Channel Kit System Memory - Retail
Model #: OCZ6251024ELDCPE-K

go in ur clasification???
05-16-2005, 07:17 PM
Punisher!

Quote:

Originally Posted by winston64

Hey punisher where does the
- OCZ EL Platinum DFI nF4 Special 1GB (2 x 512MB) 184-Pin DDR SDRAM Unbuffered DDR 625 (PC 5000) Dual Channel Kit System Memory - Retail
Model #: OCZ6251024ELDCPE-K

go in ur clasification???

They equals PC4800 by OCZ (both frequencies and timings are higher and for sure all PC4800 2,5-4-4-10 will hit PC5000 with those timings (3-4-4-10); they are the same memories with a different label in my opinion ;)).
05-17-2005, 02:40 AM
Zanr Zij

@Punisher

I removed Kingmax HardCore DDR500 Hynix DT-D5 chip and saw the PCB is Brain Power PCB ( 808 )... Sorry I can't get the picture...
05-17-2005, 03:47 AM
Punisher!

Quote:

Originally Posted by Zanr Zij

@Punisher

I removed Kingmax HardCore DDR500 Hynix DT-D5 chip and saw the PCB is Brain Power PCB ( 808 )... Sorry I can't get the picture...

NP, I trust m8... it was a possibility! :D

Next additions then are:
OC-Wear PC3200 DDR00 2-2-2-5 --> BH5
Mushkin RedLine XP4000 DDR500 --> BH5 on BP PCB
OCZ PC5000 DDR625 --> TCCD on BP PCB
Kingmax HardCore DDR500 --> Hynix D5 on BP PCB

;)
05-17-2005, 10:22 AM
winston64

Quote:

Originally Posted by Punisher!

They equals PC4800 by OCZ (both frequencies and timings are higher and for sure all PC4800 2,5-4-4-10 will hit PC5000 with those timings (3-4-4-10); they are the same memories with a different label in my opinion ;)).

the PC5000 say they hit 2.5-4-3-10 though not 3-4-4-10 its better
:stick:
05-17-2005, 10:40 AM
dippyskoodlez

Quote:

Originally Posted by winston64

the PC5000 say they hit 2.5-4-3-10 though not 3-4-4-10 its better
:stick:

yea.. 4-4-10 would perform like absolute crap, and would get walked on by 2.5-3-3-7 at like 30 mhz below. :rolleyes:
05-17-2005, 10:52 AM
winston64

so still

Gskill LEs > OCZ PC5000 ?
05-17-2005, 11:08 AM
Punisher!

Quote:

Originally Posted by winston64

the PC5000 say they hit 2.5-4-3-10 though not 3-4-4-10 its better
:stick:

www.ocz.com

http://www.ocztechnology.com/product...fi_nf4_special

The OFFICIAL certification is 3-4-4-10, while the official for PC4800 is 2,5-4-4-10 (so they are the same memories with a different label as I said before). I don't mind what they COULD perform but NOTHING could be better (at max they could equal) Samsung TCCD 440 on BrainPower PCB of G.Skill LA\LE\FF (notice: not all have 440 but this is for sure the best week of TCCD and almost all G.Skills have it, except for some 431, 437 that are in any case very good TCCDs).

Bye.
05-17-2005, 11:17 AM
winston64

Hey do you know where i could get the FFs? They dont have them at newegg and Digi4me wont ship to POBOXs
05-22-2005, 03:52 AM
LenniZ

I have a couple of 512MB XMS-PC3500C2 Rev1.1 modules here, could they be BH-5 ?
I have not checked under the heatspreaders.
05-22-2005, 04:02 AM
TEDY

they're :)

test them afterall...
05-22-2005, 04:09 AM
deception``

Is all new OCZ El Platinum Rev 2 TCC5? I was thinking of picking some of this up, but I want TCCD only :-/ Guess I'll buy some more Bh-5 instead (if this is true, that is).

deception``
05-22-2005, 06:33 AM
LenniZ

Quote:

Originally Posted by TEDY

they're :)

test them afterall...

thx :) They do 2.0-2-2-5 @200mhz 2.8v on my friends intel ic7g system (even tho he doesnt know anything about over:banana::banana::banana::banana:ing)
I will save up some money and buy them from him :D
05-22-2005, 10:20 PM
andyOCZ

Quote:

Originally Posted by deception``

Is all new OCZ El Platinum Rev 2 TCC5? I was thinking of picking some of this up, but I want TCCD only :-/ Guess I'll buy some more Bh-5 instead (if this is true, that is).

deception``

Getting the PC4200 Platinum or PC4800 Platinum will insure you get TCCD. The PC3200 Plat Rev 2 uses the TCC5 as does the PC3700. The TCC5 does low latency 2-2-2 timings better.
05-22-2005, 11:05 PM
Punisher!

Quote:

Originally Posted by andyOCZ

Getting the PC4200 Platinum or PC4800 Platinum will insure you get TCCD. The PC3200 Plat Rev 2 uses the TCC5 as does the PC3700. The TCC5 does low latency 2-2-2 timings better.

Thanks ;).

List Updated:
Additions:
Corsair 3200C2v1.5 --> BH-5 on BP PCB
OC-Wear PC3200 DDR400 2-2-2-5 --> BH5
Mushkin RedLine XP4000 DDR500 --> BH5 on BP PCB
OCZ PC5000 DDR625 --> TCCD on BP PCB
Kingmax HardCore DDR500 --> Hynix D5 on BP PCB (just added the pcb)
Kingston 3500A --> CH5
OCZ EL3700 Platinum --> TCCD, TCC5 on BP PCB

Corrections:
OCZ EL3200 Platinum Rev. 2 --> TCCD or TCC5 (new production, TCCD stopped the 7th week of 2005, while these are being RE-produced even after).

Bye! :D
05-23-2005, 02:21 AM
RaptorRaider

Quote:

Originally Posted by winston64

the PC5000 say they hit 2.5-4-3-10 though not 3-4-4-10 its better
:stick:

Mmmm... though OCZ claims they are 3-4-4-10 atacom.com also says 2.5-4-3-10. :confused:
05-23-2005, 12:23 PM
fordf250

Quote:

Originally Posted by Punisher!

Thanks ;).

List Updated:
Additions:
Corsair 3200C2v1.5 --> BH-5 on BP PCB
OC-Wear PC3200 DDR400 2-2-2-5 --> BH5
Mushkin RedLine XP4000 DDR500 --> BH5 on BP PCB
OCZ PC5000 DDR625 --> TCCD on BP PCB
Kingmax HardCore DDR500 --> Hynix D5 on BP PCB (just added the pcb)
Kingston 3500A --> CH5
OCZ EL3700 Platinum --> TCCD, TCC5 on BP PCB

Corrections:
OCZ EL3200 Platinum Rev. 2 --> TCCD or TCC5 (new production, TCCD stopped the 7th week of 2005, while these are being RE-produced even after).

Bye! :D

Then

http://www.xtremesystems.org/forums/...358#post876358

Please update.

Thank you.
05-23-2005, 07:19 PM
Punisher!

Quote:

Originally Posted by fordf250

Then

http://www.xtremesystems.org/forums/...358#post876358

Please update.

Thank you.

Actually I noticed it but the "andyOCZ"'s post just above mine confused me... don't you?
05-27-2005, 01:08 PM
13oost

Quote:

EL DDR PC3200 DC Value VX (OCZ4001024WV3DC-K) (3-4-4-8 @2,6V) --chip--> Windond UTT (relabeled as OCZ VX) ~ Brainpower PCB 808

http://www.xtremesystems.org/forums/...6&postcount=31

current Value VX ratings are now 2.5-4-4-8 @2.6v.... Winbond BH-5 w/ BP PCB 808
the ones rated 3-4-4-8 are CH (VX) chips (older sticks)

there is 2.5-3-3-7 @ 2.6 ratings on some of the DC kits ive seen, they seem to be mixed BH-5 and CH-5
05-27-2005, 11:52 PM
Punisher!

Quote:

Originally Posted by 13oost

http://www.xtremesystems.org/forums/...6&postcount=31

current Value VX ratings are now 2.5-4-4-8 @2.6v.... Winbond BH-5 w/ BP PCB 808
the ones rated 3-4-4-8 are CH (VX) chips (older sticks)

there is 2.5-3-3-7 @ 2.6 ratings on some of the DC kits ive seen, they seem to be mixed BH-5 and CH-5

Thanks, I will make the correction\adding in the next update.
05-28-2005, 01:30 AM
FLD

Quote:

Originally Posted by 13oost

http://www.xtremesystems.org/forums/...6&postcount=31

current Value VX ratings are now 2.5-4-4-8 @2.6v.... Winbond BH-5 w/ BP PCB 808
the ones rated 3-4-4-8 are CH (VX) chips (older sticks)

there is 2.5-3-3-7 @ 2.6 ratings on some of the DC kits ive seen, they seem to be mixed BH-5 and CH-5

If my sticks have 2.5-3-3-7 timings and don't boot at 3-X-X-X can I safely say that they are BH-5? Some onealready conviced me of this but just wanted to make sure.

Thanks a lot.
05-29-2005, 12:12 PM
13oost

any clue about this?

http://www.xtremesystems.org/forums/...0&postcount=54

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 03:26 PM.

XtremeSystems