:toast: good newsQuote:
Originally Posted by wwwww
Printable View
:toast: good newsQuote:
Originally Posted by wwwww
^^^ WWWW, Does this mean like CPU(s), the boards are dependant and/or lucky Few ones too??
Hm, i don`t want to do mods an that Board, but i want to get higher Vdimm.
Is there an DDR2 Booster in the future?
Quote:
Originally Posted by 4ng3ldust
Yes Hipro has one in the pipe line :D
> i have a very bad problem, because i can't get in windows
> with my 7900 GTX videocard.
--
I expect that you disabled several devices which you don't want to use.
Try enabling on-board devices!
Though I've not serveyed which device is the key device,
i975Xa-YDG's BIOS is very stupid, I think, at least for 1.02 version.
Good luck:)
Not sure what you're asking...Quote:
Originally Posted by harshal
I seem to get the same max fsb regardless of cpu.
for me, every CPU clocks different.
I havent had too much time to test, but i threw in a few today for fun, and i didnt seem to hit one wall for all.
The T2300 did the best, 266fsb
I had a T2600 ES that made it up to 244ish on air, not bad at all!
Ok man, I get your point. But then how do you explain our friends from Japan reaching 270+FSB with different CPUs?? IIRC all are same revision and every1 is using same Official Bios. So all should get almost same results +/- 10 on FSB. But this is not happening. This is really very confusing.Quote:
Originally Posted by wwwww
H
You have to remmber not all hardware will o/c well and not all are speed binned equally.Quote:
Originally Posted by harshal
That means nothing in the world of o/c ... as long as the item works at stock fine its fine.Quote:
IIRC all are same revision and every1 is using same Official Bios. So all should get almost same results [B]+/- 10
Where are you confused maybe i can help you.Quote:
But this is not happening. This is really very confusing.
This sounds more like it.Quote:
Originally Posted by irev210
Cpu rather then mobo.
However wwwww has been having problems with his mobo.
It would be a good idea to make a poll how many cpus/stepping have FSB wall etc
Thanks for clearing my doubts, ibby. I was Confused with really varied results from all over. But as you said with OC you gotta take your chance and hey, hope to get mine soon and crack whatever it can... :)
I have a T2300 and a T2500, both stepping 4, both max @ 225MHz. VCCA mod didn't help. I can get 1MHz more by using a high tRas. Lower dividers don't help so it's not the mem (Fatboy D9s). Also noted that my max vdimm is 2.04V (set @ 2.15V).
when will the fsb limitation problem be solved ?
I don't think it's a motherboard issue... If you got 2 motherboards and 2 CPU's you can test it. Anyway it isn't just a VCCA issue, if it's a Aopen problem we just hope the ECS doesn't have it :)Quote:
Originally Posted by Revage
Ok i am buying yonah, 2 x 1900xtx (crossfire), enermax liberty 620w, and this aopen mobo, is it good configuration and how better is yonah against Dothan?
And i want some good ddr 2 ram for this mobo
TNX! :D
Ofcourse, Yonah > Dothan any day :D Dual core, faster clock for clock etc
But very soon Conroe/Merom will take its place
FSB is not mobo's problems.
I have the same stepping T2600 ES. One is easy to FSB 250, and another is hard to up 233+.
I use the same mobo, cooling, power, VGA etc.........
Quote:
Originally Posted by DaWaN
Hm PF23. Nothing heard about it the last 4 weeks. Someone an idea about the release date?
Just got my mb today. I can't get cpuz to show the right voltage. I
uninstalled it and reinstalled it but to no avail.
http://img127.imageshack.us/img127/1...25006jm.th.jpg
You tried the 1.33.1 ?
If you look at the ss, that's what it is.....:)Quote:
Originally Posted by 4ng3ldust
Quote:
Originally Posted by dogsx2
Sorry too early in the morning :(
Both cores perform the same.. they are the same stable till fsb wall.
Try CPU-Z 1.33 at first, then 1.33.1...it shows Vcore correctly;)Quote:
Originally Posted by dogsx2
I already reported this Vcore sensing initialization issue to Franck.