the Daddy of all enclosures

Printable View

Show 100 post(s) from this thread on one page

05-03-2007, 04:30 PM
Ssilencer

Quote:

Originally Posted by gosmeyer

I got to hand it to u guys, those are by far the cleanest enclosure that i have ever seen period.

Thanks very much :) the old man has lots of experience on his hands

Raja's VGA adapter and new enclosure (I have it a minute in my hands, but @itor took it away to do the drill job)

http://img108.imageshack.us/img108/8...01smallyp4.jpg

http://img395.imageshack.us/img395/9...05smallce9.jpg
05-04-2007, 03:13 AM
Pete

Is there a set style or can we spec it or draw it up? How long does one take to make it?

Looks amazing and getter better every time
05-04-2007, 06:03 AM
Ssilencer

You can spec or draw it or we can do it for you.
About a labor day.
05-04-2007, 08:23 PM
V2-V3

Damn i must say nice work! got any head covers for a Prometeia?
05-05-2007, 09:04 AM
Ssilencer

Quote:

Originally Posted by V2-V3

Damn i must say nice work! got any head covers for a Prometeia?

Never tried, if there is any draws, we can see what can we do about it.
I thought you guys were already making your own...
05-06-2007, 09:50 PM
johann

Nice as always! Is that gpu mounting for the singlestage I built Raju?
05-06-2007, 11:52 PM
Raja@ASUS

yeah those beauties are mine bud... so now cascade on cpu and for benching sessions I can run the vision unit on a single gpu...

regards
raja
05-07-2007, 09:11 AM
DarthBeavis

Ssilencer can u tap a few holes to mount some of these in the enclosure you are making for me:

http://www.mountainmods.com/product_...roducts_id=401
Water clear superbright LED. 22 inch wire leads capable of reaching across any chassis. Contains pins that are Motherboard Panel ready. Hook it up to your HDD activity or Power indicator on your motherboard and watch it shine.

Specifications:
Type - 5mm
LED - Red-clear
Tail Length - 22 inches
Connector - MB Pin (2 female)

http://www.mountainmods.com/images/i...big/22RLED.jpg
05-07-2007, 01:23 PM
Ssilencer

Quote:

Originally Posted by DarthBeavis

Ssilencer can u tap a few holes to mount some of these in the enclosure you are making for me:

http://www.mountainmods.com/product_...roducts_id=401
Water clear superbright LED. 22 inch wire leads capable of reaching across any chassis. Contains pins that are Motherboard Panel ready. Hook it up to your HDD activity or Power indicator on your motherboard and watch it shine.

Specifications:
Type - 5mm
LED - Red-clear
Tail Length - 22 inches
Connector - MB Pin (2 female)

No problem, I will quote you that job with @itor and I will send you a pm later
05-07-2007, 01:32 PM
V2-V3

Quote:

Originally Posted by Ssilencer

Never tried, if there is any draws, we can see what can we do about it.
I thought you guys were already making your own...

I have some CAD drawings done for a prometeia, but getting a time slot at a machiene shop here is Big $$'s

Most of the facilities around here are tied up w/ Government contracts atm.
so making a few evap enclosures is at the bottem of their list unless we order lots of 1000.... :P
05-07-2007, 01:57 PM
Ssilencer

Quote:

Originally Posted by V2-V3

I have some CAD drawings done for a prometeia, but getting a time slot at a machiene shop here is Big $$'s

Most of the facilities around here are tied up w/ Government contracts atm.
so making a few evap enclosures is at the bottem of their list unless we order lots of 1000.... :P

Same here
anyway, this enclosures and our evaps are made on a lathe and requires craftsmanship, and not in sausages machine...
That's why I don't like when your colleague from the other forum saids he can do it better easily when he don't even know how this ones are made.
None of our evaps or enclosures are the same, all of them has little touches to make them unique, and that costs time and money.
05-07-2007, 04:08 PM
DarthBeavis

Quote:

Originally Posted by Ssilencer

Same here
anyway, this enclosures and our evaps are made on a lathe and requires craftsmanship, and not in sausages machine...
That's why I don't like when your colleague from the other forum saids he can do it better easily when he don't even know how this ones are made.
None of our evaps or enclosures are the same, all of them has little touches to make them unique, and that costs time and money.

I think you will like V2-V3. U are both are uber craftsman.
05-07-2007, 05:10 PM
teyber

hmmm im sure this has been covered... but i don't quite see the point in a cool looking thing that will be covered with neoprene, but before you condensate-proof it it looks awsome!
05-07-2007, 05:12 PM
n00b 0f l337

These do NOT get covered in neoprene ;)
05-07-2007, 05:35 PM
Ssilencer

Quote:

Originally Posted by DarthBeavis

I think you will like V2-V3. U are both are uber craftsman.

Sorry Richard, it is just that I'm getting tired of too much -bull-sh€t.
I don't have nothing against them.

Quote:

Originally Posted by teyber

hmmm im sure this has been covered... but i don't quite see the point in a cool looking thing that will be covered with neoprene, but before you condensate-proof it it looks awsome!

http://img174.imageshack.us/img174/5...4mediumcj8.jpg

http://img198.imageshack.us/img198/5523/p1260016hl0.jpg

http://img74.imageshack.us/img74/4483/p1010083fz6.jpg
05-22-2007, 04:24 AM
Ssilencer

Quote:

Originally Posted by Ssilencer

OK, this is DarthBeavis's "Ultimate" (enclosure model)

http://img91.imageshack.us/img91/3723/cpumediumol1.jpg

Soon the real deal ;)

Now the real Deal:

http://img254.imageshack.us/img254/4...terev10bk2.jpg

I got also my new "Sspacers" mounting kit for our kits:

http://img512.imageshack.us/img512/4...2mediumpq2.jpg

As soon as I get a mother I will post a mounting guide .

On the other notes. I'm back from the hospital, my daughter had to be on emergency surgery, she's is ok now, but has to stay there for a pair of days.
05-22-2007, 04:47 AM
marru

Quote:

Originally Posted by Ssilencer

Now the real Deal:

http://img254.imageshack.us/img254/4...terev10bk2.jpg

A real work of art :yepp:
05-22-2007, 05:32 AM
Pete

Quote:

Originally Posted by Ssilencer

On the other notes. I'm back from the hospital, my daughter had to be on emergency surgery, she's is ok now, but has to stay there for a pair of days.

Hey Ssilencer,

Hope things are going okay and your daughter is doing okay. Not much really but here is a dancing elephant for her

:eleph:

I've got to order soon. It's getting scarly good now! I'm still confused how your evap worksand whats the best out there.

Them screws to go in the back on the mobo side not better being lat cap style and a philps as well? Looks a little wood screw too me. Also any springs on here to stop over tightinging at all?

There any back plates on these by the way?
05-22-2007, 06:01 AM
Ssilencer

Quote:

Originally Posted by Pete

Hey Ssilencer,

Hope things are going okay and your daughter is doing okay. Not much really but here is a dancing elephant for her

:eleph:

I've got to order soon. It's getting scarly good now! I'm still confused how your evap worksand whats the best out there.

Them screws to go in the back on the mobo side not better being lat cap style and a philps as well? Looks a little wood screw too me. Also any springs on here to stop over tightinging at all?

There any back plates on these by the way?

Thanks Pete, she is better now, still in the hospital but fine, it was appendicitis but we get her at time. I'm at home feeding the dog and the cat and checking msgs, going back there later, I spent the night in a hard sofa as my wife got the extra bed for her and our other baby daughter.

Yes, the screws for the motherboard side was there just for the pic, as I got the spacers 5 minutes before the pic and I was just testing all of them to see if they was well made, it will use philips screws, and the top bolt was made in alu, I think it looks great.
We are not big fans of springs on IHS processors, screws are good for "ihs less" procs but not needed at all with current procs as you will break your mobo before crashing the proc as the ihs can witstand about 60 pounds of pressure iirc, but anyway, yes, you can use springs if you want :)
On the other side, the only springs that really work as we want has to be custom made too, calibrated for a given pressure, a normal spring it's just a pos for our application and that are the springs you usually get in any watercooling or evap kit out there.

Yes, I always ship our kits with backplates included and insulation
05-22-2007, 12:08 PM
\Karting_freak

i hope your daughter gets better
may i ask what is the liquid in post #140 third pic? looks uber cool in uv
05-22-2007, 12:49 PM
Ssilencer

Thanks
And I don't know, it is one of the Gray mole's units, Messiah Khan one.
05-22-2007, 02:52 PM
Pete

I so what one of these but i have no idea what evap to go for at all what so ever.

I know how i'd like to light up this encloser but i duno ifit can be done as all the other i have seen look nasty with wire everywhere
05-22-2007, 03:19 PM
DarthBeavis

The enclosure looks uber pimp (great)!!!!!! As far as the wires for the lighting, I will use sleeving so the wires blend in to the backround. I am not sure where the holes for the lighting are (do not see them in the pic).

Thanks for the great work and my prayers are with your daughter and your familiy.
05-22-2007, 03:55 PM
Eightballrj

Amazing work Silencer! I saw your post over at OCF as well. Might give you a ring if I decide to go vaphase this summer.
05-22-2007, 06:16 PM
Shalamay

I like it in black, just my opinon as I'm not a fan of lights. They look good though.

Show 100 post(s) from this thread on one page