Finally after completing 24hour Prime blend Stress test, I decided to tighten the timings and ended up with 3-3-2-5-1T at 275MHz. It passed Super PI 32M and it was 3D stable...
Here's a screenshot of the kit at 275MHz | 3-3-2-5-1T | 2.7V running SP2004 Blend Test for 1 hour.
http://lp.pcmoddingmy.com/albums/use...r_3Dstable.jpg
Will let it Prime until it reaches 8 to 10 hours... :cool:
Edit: Prime just breached the 11th hour now...
Would you be able to do a SANDRA buffered test with the divider at 1:1? I am curious the score difference between your CPU and mine.Quote:
Originally Posted by pcmoddingmy
All right..... here's a Sandra Memory score for you..Quote:
Originally Posted by Deathspawner
http://lp.pcmoddingmy.com/albums/use...3-3-2-5-1T.jpg
CPU-Z screenshot is the same as my earlier post. I was running an Opty 144 clocked at 2475MHz.
Btw, I took the sandra on a "dirty" windows. Was working and downloading while I got that score..... hehe :D
Cheers!
That's not 1:1 :PQuote:
Originally Posted by pcmoddingmy
Looks good though. Are you really benching in Vista, or is that a skin?
Well, my HTT was at 275 and the memory was running at 275.. so its not 1:1?Quote:
Originally Posted by Deathspawner
Nope... not Vista, its just the skin :p:
I was thinking of 2.75GHz. When my chip is 1:1 it's at 2.75GHz and 275MHz on the memory, but my multiplier is 10x.
I hope you don't write reviews based around benchmarks that occured with all that stuff running :P
Does your CPU go up to 2.75GHz out of curiousity?
Oh... you define 1:1 like that... kinda weird. If I were to run my proc at 2.75GHz, I will have to use deviders on the memory as I will have to run about 306HTT.Quote:
Originally Posted by Deathspawner
My CPU clocks up to 3GHz but can only prime stable up to 2.8GHz. :slapass:
Will try to get my proc running at 2750MHz and the mem at 275Mhz later..
As for reviews, we always bench them on a fresh OS ;)
Hey pcmoddingmyQuote:
Originally Posted by pcmoddingmy
great timings:clap:
Works fine with my memory on DFI SLI-D mobo ( 406 BTA Bios )
It's just a shame that my CPU limits the memory at DDR 526
290 x 10 / divider 180
Thanks for the timings :thumbsup:
PRJ
So you mean you don't have a 10x multiplier in that CPU, or is it locked? Sorry, I have never touched an Optie before.Quote:
Originally Posted by pcmoddingmy
Either way, good results. Hope to see you start posting around here more.
1:1 has nothing to do with what multiplier is set. 1:1 is reffering to the ratio the memory is running in comparison to the HTT.Quote:
Originally Posted by Deathspawner
No, its not locked and it could go upto X 12, but the CPU does'nt go futher than 2,9 GHzQuote:
Originally Posted by Deathspawner
ex.1 / 275 x 11 = 3.025 GHz ( to much ) 1:1 = DDR550 ( perfekt )
ex.2 / 290 x 10 = 2.900 GHz ( perfekt ) 9:10 = DDR526 ( to little )
I've tryed with .5 CPU multiplyer and odd divisor correct, but can't find a better soulution than ex. 2
PRJ
I didn't say that.. I was looking to see if he could run the benchmarks on the identical settings as my machine. 1:1 at 275HTT would make the memory 275MHz. I basically wanted to see his Optie at 2.75GHz with the memory at 275MHz. Tis all.Quote:
Originally Posted by Revv23
As requested by Deathspawner,
http://lp.pcmoddingmy.com/albums/use...DX200CF-DR.jpg
DFI LP UT RDX200 CF-DR @ 306MHz HTT
Opty 144 @ 2.75GHz
Corsair PC4400PRO 2GB 275MHz 3-3-2-5-1T 2.7V
*Benched in a "clean" Windows XP SP2 :p:
Hello PRJ,Quote:
Originally Posted by PRJ
Thanks for the support... :toast:
As for your CPU, perhaps you could lower the multi to x9 and see if you could get the modules stable at 275MHz. But your proc will be running slower of coz..
Yes, you're right. Mine is an Opteron 144, which means the multiplier is locked at 9x. AFAIK, only high-end AMD procs (eg: FX) or ES comes with unlocked multipliers.Quote:
Originally Posted by Deathspawner
PRJ,Quote:
Originally Posted by PRJ
Perhaps you can try the following:
330 x 9 = 2.970 GHz 5:6 = DDR550
Haha, maybe you can tell me what the SANDRA score was? It's far too small to read ;)Quote:
Originally Posted by pcmoddingmy
Edit: Nevermind, I could figure it out. Good stuff, scores are on par exactly with what I've gotten. Great results.
Whoops.. sorry. You can now view the actual size of the screenshot.Quote:
Originally Posted by Deathspawner
Or by clicking here: http://lp.pcmoddingmy.com/albums/use...DX200CF-DR.jpg
No worries :)
I get 7263/7188 with 3-4-4-8 timings, so your CPU seems to handle it the same as mine. Good stuff.
Hi againQuote:
Originally Posted by pcmoddingmy
Yes, that would be great, but i don't have the cooling on the cpu for higher than 2.9 GHz I Know it boots at upto 3.0 GHz but needs more Vcore than i can cool with my watercooling to be prime stable @ 2.97 GHz
But I'll try
I'll post results ( non stable ) :(
PRJ
I see... maybe you can get slightly better results at 3-3-2-5.Quote:
Originally Posted by Deathspawner
Cheers!
Hmm..... did u try the 5:6 divider?Quote:
Originally Posted by PRJ
If you ran it with a 5:6 div, you should be able to get the RAMs at 275MHz at 330HTT.
Last I ran them at was 3-3-2-0, but I didn't gather results. I run the 3500LLPRO at the same speeds though.Quote:
Originally Posted by pcmoddingmy
3500LLPRO at 275MHz 3-3-2-0? Thats sick..... mine will never go anything above 255MHz..geez :slapass:Quote:
Originally Posted by Deathspawner
Edit: Currently running the PC4400PRO 2GB kit at 280MHz (3-4-3-8-1T). Passed 3DMark03, CSS, FEAR and now awaiting to complete Super PI 32M. VDIMM was set to 2.7V in BIOS and reads at 2.67V in Windows. Will post some results soon...
That's nothing. I've done 284MHz 3-3-2-0 with 4GB of the stuff ;)Quote:
Originally Posted by pcmoddingmy