X1300 Vgpu Mod!!

pensil Vmod on chip +24 MHz = 729
pensil Vmod on ram +0 Mhz :(
timings is nornal
I need PowerColor x1300 PRO BIOS

Quote:

---

Originally Posted by DrJay

Might be low voltage or timings. I've had hynix 2.5ns ddr2 to 500+Mhz on two X1300pro cards.

---

My mistake....the chips are actually Infineon 2.5ns.

Quote:

---

Originally Posted by DrJay

Might be low voltage or timings. I've had hynix 2.5ns ddr2 to 500+Mhz on two X1300pro cards.

---

hynix 2.5ns here. Thing is that sometimes is working, but lately with only 1MHz is doing several artefacts and freeze or black screens. Softmodded Catalyst 6.4 or Extreme-ATI 1.6.3 and AtiTool 0.25beta14. What do you use?
VoltModded, 1.73V on GPU (0.5KOhm), 2.26V on Mem(10KOhm).

And I do have now WR on 3D2005 and 3D2006, i will validate later. :D

As I mentioned, they were actually Infineon 2.5ns chips. I used a combination of OCtool, Rivatuner and ATItool. At least I think I did........it has been several months now.

Hi there guys,

i've been reading this tread and was speachless ! You're my idols :D Those results were simply incredible. I've got a small barage of questions for you all, because i'm planing on buying Sapphire x1300 n-p:

1.Do i need water cooling if i'm gonna volt-mod the core
2.How much does memory speed affect the performance (if u could post parallel result or tell me cca. in percent - eg. 5%...)
3.When you say 5kOhm resistor you actually mean 5000 Ohm or 500Ohm ?
4.What is the optimal voltage for core/memory

Well, sorry for posting so much Qs but i'm kinda scared of frying my Sapp. x1300 np. Thanx guys in advance.

Quote:

---

Originally Posted by demios

3.When you say 5kOhm resistor you actually mean 5000 Ohm or 500Ohm ?

---

5k Ohm = 5000 Ohm

Quote:

---

Originally Posted by sabrewolf732

depends on the card, the XV x1600pro w/ ddr3 has hit like 750 with a vmod :slobber:

---

Voltage Modification Guide For Sapphire X1600PRO 256MB the got it 800.. that was a sapphire do...

Tnx jumanji969, i thought so, but i just wanted to make sure ;)

whats the max 05 score of this v-modded cards then?

I bought the damn thing - Sapphire x1300 256mb 2.8ns (65e) On stock volts it does 650/890 !!! And I get cca. 2850 in '05 (because i have weak system memory, but i guess i'd get cca. 3000 with some normal mem). I installed 8cm fan on the front and added some passive sinks on the back memory chips, i also hang another 8cm fan to cool the back side of the card. Now, I understand that i need to vomd core, but i'd rather do it /w pencil than resistor. So I'd kindly ask someone of you to draw me :D where i need to make a line /w pencil. I know i ask too much, but srry the card is cold all the time - it want's to get modded, please help her ;)

Tnx guys.

edit:

if i flash it /w PRO bios, will i get higher voltages ? or if i edit this bios ?

Can someone give me Sapphire x1300 pro bios ? tnx

so where is the volt mod guide?

please post the gigabyte x1300 pro voltmod.

Quote:

---

Originally Posted by vservera

please post the gigabyte x1300 pro voltmod.

---

Last replies are over 2 years old...
:stick:

Start a new thread.