Printable View
It's cut yes, but even before I flashed I couldn't use higher Multipliers, when I flashed to C16 I got all the multipliers.Quote:
Originally posted by br@insc@n
Opp, have you modded your XP2700+ by cutting the one L12 bridge?
I've got the 8RDA+ and the same CPU, but I cannot use multis >12.5. Had this "bug" occured before you changed to c16?
thx br@insc@n
OPP
I did one run at 115x13 stock card speed, and it went through, other then that one I can't get any published.
OPP
WOW!!! Thats a sick score!! Good job thats just damn amazing :D
So OPP, you kindda liked that EPoS board, eh?Quote:
Originally posted by OPPAINTER
I did one run at 115x13 stock card speed, and it went through, other then that one I can't get any published.
OPP
I knew you would ;)
Heey i have got my fsb @ 220 but my max sandra score was 3280. I was using the C10 bios. I have tested the C31 And it works fine. ist more stable here.But my mem scores dit not increes. :mad: I have got Twinmos Pc3200 5 Ns. Anyboy who knows the problem ? My cas settins are 2.5-2-2-7Quote:
Originally posted by OPPAINTER
Heres some more FSB:)
And Quad, I did both methods, nothing works.
OPP
what multiplier are you running? sandra is known to report low scores for multipliers below 10.Quote:
Originally posted by -=Astennu=-
Heey i have got my fsb @ 220 but my max sandra score was 3280. I was using the C10 bios. I have tested the C31 And it works fine. ist more stable here.But my mem scores dit not increes. :mad: I have got Twinmos Pc3200 5 Ns. Anyboy who knows the problem ? My cas settins are 2.5-2-2-7
The 7 and the CL2.5 doesn't help.Quote:
Originally posted by -=Astennu=-
Heey i have got my fsb @ 220 but my max sandra score was 3280. I was using the C10 bios. I have tested the C31 And it works fine. ist more stable here.But my mem scores dit not increes. :mad: I have got Twinmos Pc3200 5 Ns. Anyboy who knows the problem ? My cas settins are 2.5-2-2-7
OPP
OFF Topic:
Just installed a pelt graphics cooler (Swiftech) in the the VapoChill, check it out :D
OPP
Man. You are so lucky you have all of this cool stuff to tinker with!
vapo and prommie what else could you ask for ?
CPU Mhz and MBM.
I notice only wcpuid reads the corect Mhz on this mobo, even my MBM has a problem, I keep hiting update CPU and it changes the Mhz to many different numbers except for the correct one:D
Could be the same problem as 3D Mark.
OPP
Took a few good years of Hardcore Overclocking to be able to obtain all this stuff.Quote:
Originally posted by Emericana
Man. You are so lucky you have all of this cool stuff to tinker with!
vapo and prommie what else could you ask for ?
Kingston is taking this Vapo to Las Vegas for the CES show next week. Xtremesystems will get in some advertising out of the deal:D
OPP
cant Kingston aford a vapo for them selves
I can only imagine THAT will be fun to play with. :D Now all ya need is a modded Lian-Li ('s) like on the front page. :cool:Quote:
Originally posted by OPPAINTER
OFF Topic:
Just installed a pelt graphics cooler (Swiftech) in the the VapoChill, check it out :D
OPP
Congratulations OPP
You done it again.
Now take 1st spot away from JC
Jen
Have you tryed to mess with the cpu throttling option in the bios ?Quote:
Originally posted by OPPAINTER
CPU Mhz and MBM.
I notice only wcpuid reads the corect Mhz on this mobo, even my MBM has a problem, I keep hiting update CPU and it changes the Mhz to many different numbers except for the correct one:D
Could be the same problem as 3D Mark.
OPP
maybe thats the key to the problem
lol soo lucky, would be a dream to own everything you do. and Congrats again :)Quote:
Originally posted by OPPAINTER
Took a few good years of Hardcore Overclocking to be able to obtain all this stuff.
Kingston is taking this Vapo to Las Vegas for the CES show next week. Xtremesystems will get in some advertising out of the deal:D
OPP
i'm hoping to get a new mobo for my birthday so i can start ocing this 2100+ this a7n266-vm can't oc, but hey the first was right when i got it ( $0 ) :)
I think I dissabled it.Quote:
Originally posted by SKATAN
Have you tryed to mess with the cpu throttling option in the bios ?
maybe thats the key to the problem
OPP
Good question, SKATAN. I've never messed with that setting. I wonder what it would do at 100%? Might be smart to ease up the scale, like 60% then 70%, etc. (if default is 50%).
perhaps leaving it at the default setting (50% I think it is) would not give you these problems? Just an idea, would be nice if it worked ;)Quote:
Originally posted by OPPAINTER
I think I dissabled it.
OPP
Cpu throtteling SUCKS atleast in my board. keep it disabled. When running prime 95 with that enabled and at the same time listening to mp3/surfin net, i get my mouse stutterin all over the place!!!! the second i disabled it the prob went away!
I've got CPU throttling disabled and had 2 scores rejected for publication yesterday. Its something with the 3DMark software and the NForce2 boards....a mhz flucuation is being detected. Thats the reason it rejects publishing the score, according to the powers that be at FutureMark:)
Randi:D
thats pretty odd i can submit all of my stuff fine... here is my last one nothin special but still it proves stuff can be sent on 8rda
http://service.futuremark.com/compare?2k1=5264197
oh yeah opp you prolly did this but just as a suggestion to get a few hundred more points, set your AGP bus at 100mhz if it can handle it... it works great on my ti4200
I wonder if we can reproduce these "CPU speed" errors..?
I suggest we get like 5 cpu hogging probrams (CPU burn, prim95, sandra burn-in, seti@home for example) and run them all simultaneously...
If this works correctly, it should make the cpu speed do what 3dmark is "experiencing" and we should be able to detect it by hitting refresh with CPU-Z or WCPUID repeatedly...?
Since MBM5 cant detect the cpu speed correctly, but WCPUID can, maybe its a software error?
I'm running 10.5 now and got 3315-3103 At 215 Mhz 2.5-2-2-7. But my cpu has problems. I can run it max @ 2260 mhz @ 200+ mhz fsb's. And @ A FSB of 1600 i can get a 2400 Mhz out of it :confused:. I'm using te C31 bios now Its working perfect. I'm Gonaag get a Weak 49 2400+ Cpu next week i whant 2,5+ Ghz :D My old Weak 41 had To mush problems @ high fsb'sQuote:
Originally posted by TheDong
what multiplier are you running? sandra is known to report low scores for multipliers below 10.
Congrats, OPP...awesome scores :)
Hope FM lets you publish these...I find it rather ridiculous that ya can't.....