Quote:
Originally Posted by Woody-san
6.1 Ghz on a dual core is an error, bug, etc. Everyone here should know that :slap:
Printable View
Quote:
Originally Posted by Woody-san
6.1 Ghz on a dual core is an error, bug, etc. Everyone here should know that :slap:
What cpu's have the E4 and E6 core.
Got a E6 Opteron 165 now but it hates my ballistix. I heared that all new E6 cores have that problem. So i need a new cpu.
I can choose the folowing:
X2 3800+ for 305 $
X2 4200+ For 370$
A Opteron 170 for 430 $
Or a X2 4400+ For 470 $
If i take the E6 cores there is a chance that i have to swap mamory aswell. What would you guy's do ?
You're going to have to accept that your Ballistix might not like themselves either. Mine aren't as good as they were and that seems to be normal.Quote:
Originally Posted by Astennu
When they fall below spec, hopefully an RMA with bring me replacements with some Rev F Micron goodness. :)
Thats not the case pulled out me old cpu and they did 270 mhz. Cant do that with the opteron not even 250. but one cant run 250 @ 2.6 i think its dammage but don't like RMA :D takes 2 months and need pc every day.Quote:
Originally Posted by stone_cold_Jimi
Figured id post the cpu that preety much was the beginning for the LDBHE X2 craze.
This was when i first started researching the x2 steppings about 3 months ago
LDBHE 0539 RPMW IRC its been under phase so long but i think its the correct stepping. This was in the batch 0500 range. 1.6v 24/7 stable. this is actually an old shot. I've since tweaked the ram timings quite a bit.
http://members.cox.net/wmdieselmc26/infineonBE-6.jpg
http://members.cox.net/wmdieselmc26/...E-6%203d01.jpg
http://members.cox.net/wmdieselmc26/...E-6%203d03.jpg
http://members.cox.net/wmdieselmc26/...E-6%203d05.jpg
http://members.cox.net/wmdieselmc26/...E-6%203d06.jpg
Nice chew*, but 1.792v? Is that real? I'm afraid of that kind of voltage lol.
nah thats a bug on the grouper board...with cpu-z. 1.6v is the max i'm comfortable pushing into a cpu on phase for 24/7 use. This is my everyday rig. I do everything on it while running rosetta 24/7 in the background, I don't even realize its running.........those were completely untweaked video settings to....Quote:
Originally Posted by stone_cold_Jimi
That's nice then. I wound the 0607 N back to 3000/1.5v, it's comfortable there with CPU at -14C (Rosetta running). 3100/1.62v was about 6C warmer, still haven't tweaked the mem some more to get rid of the random error, I'll see how these 2 WUs get on at lower speed and voltage.Quote:
Originally Posted by chew*
I'm very Happy because My X2 3800+ LDBFE 0607TPMW Can Get Pass Dual Stress Prime2004 at 2.9 Ghz With V-core 1.472 :)
My room temp, approx 30-32 C
http://valid.x86-secret.com/show_oc?id=80835
http://img239.imageshack.us/img239/1...nair4ci.th.jpg
http://img96.imageshack.us/img96/3082/img19240my.th.jpg
My new toy :D
http://img.photobucket.com/albums/v4...N/3800step.jpg
Should fly at -70C. And it better since I'm losing cache coming from a 170. Going to fire it up soon. On air that is. Dice friday.
results on air ?
Post results soonest. This is the second 060x that I've seen with an AW ending on the date code. It's generally MW. It's something to do with mixing batches or not, can't find the table just now. Anyone?Quote:
Originally Posted by afireinside
System
3800+ X2 3800DAA5BV ...... 0601TPDW
Cooling by : Thermaltake Big Water 745 ( temp enviroment ~ 10'C , near the windows :P )
DFI NF4 SLI-D 623-3 bios
Powercolor X850XT 256Mb
2x1GB Kingston Value PC3200
OCZ PS 520W
@ 310 x 10 Vcore 1.58v
divider 150 , Vdimm 2.6v
VID= 1.425v
VID SPECIAL= 113%
CHIPSET= 1.5V
LDT= 1.2V
LDT= 4X
CPC = Enable
CAS Latency(CL) = 2.5
RAS to CAS(Trcd) = 3
Min RAS# Active time(Tras) = 8
Row Precharge Time(Trp) = 3
Row Cycle Time(Trc) = 7
Row Refresh Cycle Time(Trfc) = 14
Row to Row Delay(Trrd) = 2
Write Recovery Time(Twr) = 2
Write to Read Delay(Twtr) = 1
Read to Write Delay(Trwt) = 2
Refresh Period (Tref) = 3120 =200 15.6us
Write CAS Latency(Twcl) = 1
DRAM Bank Interleave = Enabled
Skew = AUTO
Skew Value = 0
DRAM Drive Strength = weak3
DRAM Data Drive Strength = 1
DDRAM Response Time= normal
Max Async Latency = 8ns
Read Preamble Time = 6ns
Idle Cycle Limit = 256
Dynamic Counter = Disabled
R/W Queue Bypass = 16x
Bypass Max = 7x
32 byte Granularity = Disable(4burst)
------------------------
Dont know why CPU-Z shows Ram @ 196 , actually it is @ 221 ( look at A64 Twaeker )
http://img204.imageshack.us/img204/8...00211du.th.jpg
SPi 1M stable LDBFE 0607 SPMW "T" @ 1.62v.
http://valid.x86-secret.com/show_oc?id=81247
1M stable at 3.2? What cooling?
Sorry! Single stage phase (Vapo LS). They're not as good as the 0601s, but they're good. The one I took out earlier had run Rosetta at 3100 for hours; this one looks like it will do the same (but runs at 1.47v at 3GHz, less than the 4600).Quote:
Originally Posted by Absolute_0
Oh ok, i was thinking it was air/water for a second hehe.
I just got this, thanks to Chew* for hookin me up
http://img.photobucket.com/albums/v7...g/3cab923f.jpg
Water results in a few minutes
Yes its an N chip
MaxTcasetemp is 69c
Can't wait! TPMW and #203.... :up:
good luck with your 3800
is it going straight under phase ?
under water right now, priming at 2.9 Ghz.
Phase in a few days, i'm going on spring break and need to move my comp back home.
2.95 fails with 1.6
2.90 fails with 1.56
2.85 fails with 1.48
Guess i really need to raise volts :stick:
Damn, i've got the same chip with 0203 batch #.Quote:
Originally Posted by Formann
Needs 1.52v and watercooling to get 2.85 stable though :stick:
Presenting LDBFE 0607SPMW "T" a.k.a. "Mr T" under phase pwning my CDBHE 4600 at 3000 MHz. It's running Rosetta 16/7 (can't leave it on overnight or I'll get an ASBO off the neighbours), so instead of SP2004, here's a more realistic shot:
Been looking through these nice 06 steppings and I've decided to hop off the Opter-craze and onto the x2. Are these good 06 stepping still available at places like Newegg or Monarch? Am I still guaranteed a great clocker, or should I buy privately?
2006 X2 = 2.8ghz almost guaranteed :)Quote:
Originally Posted by manomanx2
Yes, I figured that much. However, are the good ones still widely available at Newegg and Monarch, or would I have to buy privately?