Nice memory Gigi-there is my answer with Geil TCCD
DDR 612 2.5-3-3-7 1T
http://img50.imageshack.us/img50/51/306trcd35cy.th.jpg
Printable View
Nice memory Gigi-there is my answer with Geil TCCD
DDR 612 2.5-3-3-7 1T
http://img50.imageshack.us/img50/51/306trcd35cy.th.jpg
Here's my first results with some Geil One S.
DDR600 @ 2.5-3-3-5 @ 2.7v
IanOcean, how come you get a faster Pi32M time than I when I'm running at 2.7GHz, is it to do with the 1.4mod on Super Pi?
These sticks have more in them I believe, just need more time for testing.
Your SUper 32M is way to slow. Set the to 100Mhz 1.95us; DQS Skew Mode to OFF, and DQS Skew to 0.
Thanks for the help Bamboo, it's hard to fully test when you have limited time on your hands. It's the great guys here that really make my days. :D
My new Venice E6 is maxing at 2.5Ghz
nice but the alpha timings are too "relaxed"Quote:
Originally Posted by ianocean
anyway how many vdimm?
2.7v no more.These TCCD's over DDR580 are true hot-i'm using Delta 80mm high power case fan to cool them
try 2,8 i've been using vitesta's TCCD 24/7 @ 2,9Quote:
Originally Posted by ianocean
it's normale 2,5~2,95 :D
I will fight for 308-310Mhz this weekend
Good luck with it ian. For the testing of those chips im doubting between a 3500 or 3000+ venice.. What would you guys reccommend?
Regards
I would steer away from the Venice and get an SD core.. the E3/6 seem to be very touchy when running high FSBs with a matching or divider to maintain the memory at DDR600+....Quote:
Originally Posted by x3ro
what cpu would you reccomend me them with sd core??
Regards
a 3700+ sandy :p:
Hi Guys! (We Gigi...anche tu quì... :D)
Does anybody knows how to reach 300Mhz RS with a pair of GeIL Ultra-X TCCD 2x512Mb?
I can't go over 295Mhz with the following timings and Dfi Lanparty Ultra-D Nf4+venice 3200:
Vdimm 2,8V (with 2,7V i can't pass SuperPi32 M)
enabled
2.5
4
5
3
7
14
3
2
1
2
3210
1
enabled
auto
0
lev8
auto
8ns
5ns (5.5ns on A64Tweaker)
normal
256
enabled
16x
7x
disable
With 2.5-3-3-x i can't go over 265Mhz! :confused: Is it normal??
I'm using yellow slots...but i can't go over 295Mhz with orange slots too.
Sorry for my poor english. :rolleyes:
@Dandrake
Try this, works for my Ultra-X :
enabled
2.5
4
8
3
12
14
2
2
1
2
3072
1
enabled
inc
255
lev7
lev2
9ns
5ns (5.5ns on A64Tweaker)
normal
256
disabled
16x
7x
disable
try this Dandrake:
enabled
2.5
4*
7*
4*
12
14
2
2
1
4*
3072*
1
enabled
inc
0*
lev8
lev1*
8ns
5ns (5.5ns on A64Tweaker)
normal
256
disabled
16x
7x
disable
* is the ones ive changed. thats what i use on my One up to 330Mhz so should get you to 300Mhz then you can tighten timings.
targ
here's my GeIL One S in action :banana:
http://img361.imageshack.us/img361/8979/geil1s7an.jpg
:woot:
impressive stuff mate.
glad to see you are getting good results.
targ
nice results sila
Hi! This is my GeIL ONE TCCD
loose timing at 3-4-4-8 at 2.85vdimm at 1T at DDR660(330Mhz) with Super Pi 1 million.
OT: My GeIL ONE TCCD is super hot when doing benchies at 2.85vdimm. How about you guys??? It is hotter than my previous TwinMos SP st 3.6vdimm.
http://img287.imageshack.us/img287/4...erpi1mil9g.jpg
my cpu is blocking me :mad: tried gm and memtest @315 2,5-4-3-5 with same alphas moved max async from 9 to 8 still kicking :D
yes, most performance ram gets warm to hot, thats why these modules have the temp sensors on the side. i would suggest an 80mm fan blowing on them.
i fact i would suggest it to any one overclocking ram. :)
targ
My one does not have temp sensor on the RAM :confused:Quote:
Originally Posted by targ
i've been looking for that sensor before i bought it and after..where is it? :confused:Quote:
Originally Posted by targ
on the side of the strip, 4 boxes with numbers in them, and the realevnt box lights up for the current temp.
simple yet effective.
targ