TCCD DDR600+ DFI nF4 Ultra/SLI guide

Quote:

---

Originally Posted by higherøx

I tested and 414-1 just gave me WORSE results!

I don't know what more to do... I'd like 300 2.5 3-3-6 1T or ~315 2.5 4-3-7 1T :(

My SuperPI sometimes does not work, shows errors... What do you think it is?

Please, help...

---

Its very simple: its the CPU or/and the memory.
2.4GHz is about the max for a common CBBID winchester. CBBID's are not good overclockers. The memorycontroller sucks most of the time too..so..

If SuperPI still fails also at stock speeds, then the memory can be faulty. It depends what kind of errors you get. "Not equal things..."

HTT can be the problem also, at 300Mhz you may consider rize some voltage. I use 1.3/1.6v at 300Mhz HTT. Try it yourself. Experiment, you learn from your problems. good luck.

Ok thanks.
I will try to sell it and buy a Venice / Winchester CBBHD

Where did you found PC4800FF?

Quote:

---

Originally Posted by higherøx

Where did you found PC4800FF?

---

He doesn't have to find it, he works for G.Skill :)

Quote:

---

Originally Posted by [timko]

He doesn't have to find it, he works for G.Skill :)

---

Oh... ok :)

PS.: I wrote wrong, the correct is "Where did you find it" and NOT "Where did you found it" :D LOL :D :D

Thanks

PS.: When will it be disponible at newegg?

New results:

DDR620 2.5 4-3-5 1T 2.9v

http://img126.echo.cx/img126/3226/dsc042962tp.th.jpg

2400MHz + DDR600 2.5 4-3-5 1T 2.8v

OCCT: http://server2.uploadit.org/files/higherox2-imagem.JPG

F0ckin' A64 CBBID, holy :banana::banana::banana::banana: for overclocking, 2400MHz with 1.66v :(

Can I use 2.9v daily (around real 2.99v) with no problems (sudden death or lose warranty for example) in my TCCD?

Thanks

PS.: Like I said I am just learning English, you'll find so MANY errors :D Sorry

Quote:

---

Originally Posted by higherøx

New results:

DDR620 2.5 4-3-5 1T 2.9v

http://img126.echo.cx/img126/3226/dsc042962tp.th.jpg

2400MHz + DDR600 2.5 4-3-5 1T 2.8v

OCCT: http://server2.uploadit.org/files/higherox2-imagem.JPG

F0ckin' A64 CBBID, holy :banana::banana::banana::banana: for overclocking, 2400MHz with 1.66v :(

Can I use 2.9v daily (around real 2.99v) with no problems (sudden death or lose warranty for example) in my TCCD?

Thanks

PS.: Like I said I am just learning English, you'll find so MANY errors :D Sorry

---

Very nice result :) for a CBBID is pretty awesome :D
2.9v is no problemo for TCCD. Make sure you put a little airflow trough the memory. (e.g. 80mm fan)

how can u put a fan to the memory? i dont know how to put the fan :(

^^^ This is one method...

http://www.xtremesystems.org/forums/...1&postcount=57

playing with APACER PC4000 TCCD 256modules

300*9

http://img127.echo.cx/img127/4159/ap...60018xg.th.jpg

http://img127.echo.cx/img127/1604/ap...r6008ti.th.jpg

Quote:

---

Originally Posted by kakaroto

Very nice result :) for a CBBID is pretty awesome :D
2.9v is no problemo for TCCD. Make sure you put a little airflow trough the memory. (e.g. 80mm fan)

---

Thank you!
My Venice 3000+ will come tomorrow or "the day after tomorrow" (I don't know how to write it ehaie :D) and then I will test it!

Do you have any idea to get 315 FSB with these G.Skills?

Quote:

---

Originally Posted by higherøx

Thank you!
My Venice 3000+ will come tomorrow or "the day after tomorrow" (I don't know how to write it ehaie :D) and then I will test it!

Do you have any idea to get 315 FSB with these G.Skills?

---

315MHz is possible, it depends on your board and memorycontroller.
With some descent gskill 315MHz is possible with 2.5-4-4-8 or 2.5-4-3-8 1T timings.
Let us know what the results are with your future CPU.

My highest is now 300MHz 2.5-3-3-6 1T for 24/7 stability use with 1GB FF.

Quote:

---

Originally Posted by kakaroto

315MHz is possible, it depends on your board and memorycontroller.
With some descent gskill 315MHz is possible with 2.5-4-4-8 or 2.5-4-3-8 1T timings.
Let us know what the results are with your future CPU.

My highest is now 300MHz 2.5-3-3-6 1T for 24/7 stability use with 1GB FF.

---

Thank you
I'm with problems with my Venice, it doesn't do 2.4GHz stock voltage (it's not normal... isn't it?)

But I'm using 310P Bios, do you think I should try any other bios? The problem is that 310P is the bios that works fine with my G.Skill :(

Any suggestions?

Quote:

---

Originally Posted by higherøx

Thank you
I'm with problems with my Venice, it doesn't do 2.4GHz stock voltage (it's not normal... isn't it?)

But I'm using 310P Bios, do you think I should try any other bios? The problem is that 310P is the bios that works fine with my G.Skill :(

Any suggestions?

---

Flash the newest bios please... www.dfi.com.tw These have support for Venice and Sandiego processors.
I use the 414-1 bios, 414-2 works fine too. This BIOS support the VENICE and SAN DIEGO.

I'm using 414-3

:(

Their is a new bios available 510. This one is again available in three flavours.

The best for TCCD is 510-2 with 3.16 Ramtable with memory in the orange banks.
For TCCD set Dram response at FAST.

I also find out that test 8 is better and more accurate on errors then test 5.

http://xtremesystems.org/forums/atta...id=30495&stc=1

When test 5 is stable, also test with #8. The errors will shown on screen directly during the test, not after a pass.

kakaroto can you please post your mem settings ?
I have the same ones and some difficulties to get them fully stable at DDR600 2,5-3-3-7...

And you think 510-2 is the best for my mems ?
I'm using 510-3 and I think it's great...

Quote:

---

Originally Posted by PicaXuu

kakaroto can you please post your mem settings ?
I have the same ones and some difficulties to get them fully stable at DDR600 2,5-3-3-7...

And you think 510-2 is the best for my mems ?
I'm using 510-3 and I think it's great...

---

Have you tried my settings from the guide?

Here are the PC4800 FF settings:

http://xtremesystems.org/forums/atta...id=30496&stc=1

Try differrent voltages, 2.6 - 2,66v - 2.7v - 2.77v - 2.8v then find the max stable memtest test5 & 8 run.

Also play with the the Drive strength en data, I used Drive strength 8 and data strength 2.

I've already tried those settings but can't pass test 8 of Memtest even at DDR590 neither DDR600...

Here are my exact bios settings with bios 510-3:

http://www.cyclopnet.pt/~nsl69249/bios1.jpg

http://www.cyclopnet.pt/~nsl69249/bios2.jpg

Can you help me please ?

Quote:

---

Originally Posted by PicaXuu

I've already tried those settings but can't pass test 8 of Memtest even at DDR590 neither DDR600...

Here are my exact bios settings with bios 510-3:

http://www.cyclopnet.pt/~nsl69249/bios1.jpg[/IMG]

http://www.cyclopnet.pt/~nsl69249/bios2.jpg[/IMG]

Can you help me please ?

---

You can change the read preamble to 5ns, and tref to 100MHz 1.95us in A64tweaker. I don't know the exact Tref setting in the bios..forgot it.

Try rise the Drive strength.

EDIT: I see you use 510-3. Try 510-2 and use the orange banks in case you didn't :)


Have you tried all voltages?

Thanks for your help kakaroto !

I've just set DRAM Drive Strength to 7 and now everything is OK !
Rock stable DDR600 2,5-3-3-6 @ 2,6v !

I'm already using orange banks,
I think it's not necessary to try 510-2, what do you think ?

My San Diego 3700+ Rock Stable at 9x290 1:1 2,5-3-3-5

1.95 100mhz = 3684 in bios

Quote:

---

Originally Posted by PicaXuu

Thanks for your help kakaroto !

I've just set DRAM Drive Strength to 7 and now everything is OK !
Rock stable DDR600 2,5-3-3-6 @ 2,6v !

I'm already using orange banks,
I think it's not necessary to try 510-2, what do you think ?

My San Diego 3700+ Rock Stable at 9x290 1:1 2,5-3-3-5

---

Glad to hear my help works :) have fun.

Is that 32M pi stable?

Thnx artic-k20 :)

Where can I find 510-2 for download?

thanks

Quote:

---

Originally Posted by higherøx

Where can I find 510-2 for download?

thanks

---

Here.

Yep kakaroto Pi 32M rock stable !!! :)