OPB's New BH-5 records(FSB) on DFI SLI-DR

Printable View

Show 100 post(s) from this thread on one page

02-09-2005, 03:46 PM
saaya

kevin, is 2-2-2-4 really faster than 2-2-2-5 or 10 or something else? or did you just use it because it looks good? :D
02-09-2005, 04:21 PM
Revv23

Quote:

Originally Posted by saaya

yes, i helped sae to get an x850xtpe as well :D
your welcome! im glad it clock that nicely and you enjoy it!
have fun with it :) :toast:

btw SAE, i got a confirmation for the fx55 you wanted, next week ;) hit me up on msn :D

your welcome :toast: get some nice numbers out of it! that memory should be able to do more, make sure you use a psu wire for it that is not plugged to any other devices to it gets a clean and interference free cable directly from the psu! maybe the card needs more fresh air? what air temp is it there? i have seen 6600gt cards with 1.6ns gddr3 from samsung that did 1340mhz totally stock with even no heatsink on the memory! :D

maybe the heatsink on this card actually makes the memory get even hotter? maybe the heat from the overclocked gpu is transfaired to the memeory by the heatsink? try to overclock the memory without overclocking the gpu and see if you can get a higher overclock! :)

perhaps the 6600 card has a higher stock voltage on memory?
02-09-2005, 05:04 PM
Onepagebook

Quote:

Originally Posted by bachus_anonym

Damn, OPB :slobber: :thumbsup:

Superb clocks there!

When you get a moment can you do me a huge favour and try to run SuperPi 16M unpatched on it, plizzzz ? I'm very curious if you can get it below 10m00s...

Thanx,

BTW, what voltage is that BH-5 at?

Hi dear Bachus..
If I am correct, it is 3.8v I think
I will find a time to run 16m no problem :)
02-10-2005, 07:20 AM
SAE

Quote:

Originally Posted by saaya

btw SAE, i got a confirmation for the fx55 you wanted, next week ;) hit me up on msn :D

Great! :D

I will see ya on MSN, you have not been online yet. :D (have to go to work this evening, coming back 10pm, mate).

Hmm, I am wondering about what you said about the 1.6ns mem... didn't nvidia gf5 and 6 cards always a load better on the memory than their ati opponents?

It may be a pcb layout problem. (BTW I think, he has not really started playing with it ;) )
02-10-2005, 07:28 AM
HARDCORECLOCKER

Quote:

Originally Posted by SAE

Great! :D

I will see ya on MSN, you have not been online yet. :D (have to go to work this evening, coming back 10pm, mate).

Hmm, I am wondering about what you said about the 1.6ns mem... didn't nvidia gf5 and 6 cards always a load better on the memory than their ati opponents?

It may be a pcb layout problem. (BTW I think, he has not really started playing with it ;) )

:D So at last You've been succesful with Your search - hope for a good clocker so.......... :toast:
02-10-2005, 07:29 AM
Gamer

hmm, thought you can do better than that OPB ?

http://service.futuremark.com/compare?2k1=8309330
all air too but tweaked :p
02-11-2005, 09:29 AM
saaya

Quote:

Originally Posted by Revv23

perhaps the 6600 card has a higher stock voltage on memory?

would be surprised to see... maybe its the memory controller... we all know that memory ocs different on nf2 nf3/4 and 865/875 or 915 chipsets... so maybe the memory scales higher on the 6600 memory controller...

and yeah, maybe its also a pcb thing, good idear! the 6600s only have a 128bit memory bus wich means the design is much simpler and thus probably allows the chips to clock higher, just like different pcb designs for memory sticks. since its only 128bit they had more pcb space for the traces and could isolte them better or make them shorter...

i guess its a mix of all of this :)

its really nice to see a mid end card outperforming a super ultra high end card . at least when it comes to the memory clocks :P heheheh

Quote:

Originally Posted by HARDCORECLOCKER

:D So at last You've been succesful with Your search - hope for a good clocker so.......... :toast:

in the end he decided to not cancekl the order he already made for an fx55 and wait until that shop gets fx55 chips... so we will have to wait some weeks until we see SAE pulling some insane numbers again :( :D

Quote:

Originally Posted by Gamer

hmm, thought you can do better than that OPB ?

http://service.futuremark.com/compare?2k1=8309330
all air too but tweaked :p

this was just his first test, he just checked how well the card clocked out of the box :P
02-11-2005, 10:56 PM
[G.N.U.]Fragman

anyone tried the OCZ pc4200EL (should be hynix chips) on the final DFI sli-D board?
02-12-2005, 04:25 PM
Melchior

very nice man!

i think because of you my overclock-madness will have a comeback ;)

just got to sell my 4gb of bh5 and buy some 256mb sticks and better stuff...

cya in hell :toast:
02-12-2005, 10:53 PM
linhvndiy

Hi! When you maxout your BH-5? Why dont you test with multi 11???Can not only 8k sisoft???
02-13-2005, 02:22 PM
jan

1 Attachment(s)

With this settings I booted into windows at 3.7 Volts.

I hope I can get some more mhz out of it with some more volts. :)
I am just waiting for the DFI-NF4 Ultra

http://www.xtremesystems.org/forums/...id=24575&stc=1
03-01-2005, 11:35 AM
Onepagebook

Quote:

Originally Posted by jan

With this settings I booted into windows at 3.7 Volts.

I hope I can get some more mhz out of it with some more volts. :)
I am just waiting for the DFI-NF4 Ultra

http://www.xtremesystems.org/forums/...id=24575&stc=1

Any resesult from DFI ultr-D?
03-13-2005, 03:53 PM
Ref

OPB, what's your max. screen ? And max. sandra bench ?
03-14-2005, 05:56 AM
boblemagnifique

:toast: DFI / BH5 :banana:

2*256 ADATA BH5 (0313we) 2/7/12/2/2/5/2/2/1/2 , 3.9v :)
DFI NF4 ULTRA D
3200+ CBBHD 0447 TPEW
Box AMD (tower outside)

http://www.membres.lycos.fr/boblemag...uperpi28s2.PNG
http://www.membres.lycos.fr/boblemag...we2/295mhz.PNG
http://www.membres.lycos.fr/boblemag...nf4/fsb504.png
http://www.membres.lycos.fr/boblemag...ie@3140mhz.PNG
03-14-2005, 06:02 AM
funkflix

Nice one! :toast:

Which bios do u use? U had any problems to get more then the 3,8V setting working on the DFI? I always get BSODs when i set it to 3,9V or above...
03-15-2005, 09:25 AM
boblemagnifique

Quote:

Originally Posted by GravediggA

Nice one! :toast:

Which bios do u use? U had any problems to get more then the 3,8V setting working on the DFI? I always get BSODs when i set it to 3,9V or above...

3.10 Modded -> FSB 504
2.18 -> for the remainder

my bh5 is stable 3.8/3.9v in bench but has 4v at home it is very unstable :rolleyes:
03-15-2005, 09:36 AM
HARDCORECLOCKER

Quote:

Originally Posted by boblemagnifique

3.10 Modded -> FSB 504
2.18 -> for the remainder

my bh5 is stable 3.8/3.9v in bench but has 4v at home it is very unstable :rolleyes:

:confused: Do You mean 3.10p ???

:toast:
03-15-2005, 09:46 AM
boblemagnifique

http://www.techpowerup.com/articles/other/114
03-15-2005, 10:49 AM
HARDCORECLOCKER

Quote:

Originally Posted by boblemagnifique

http://www.techpowerup.com/articles/other/114

:D THX, nice link - but again what do You mean with the mod version of 3.10, are You using the 3.10p (performance) ???

Or is it me, a little stupid....... :p:

:toast:
03-15-2005, 10:53 AM
Onepagebook

ya , I am also kinda lost, cuz what my post has 2 bios only, only 390-2 and 310-2.
03-15-2005, 07:41 PM
jinu117

Sigh... gave up trying to get to those... just got another pair of BH-5 512x2 and got it to 270 2-2-2-5 @ 3.8v... looking at how it curved, think max probably is around 275 4.0v... not going to risk it.... :P Time to work on divider and lower the volt... I am impressed at how this DFI is taking BH-5 into new startosphere. (all other settings on memory were stock other than 2225 part... I don't pretend to know all these memory settings... :P)
03-15-2005, 08:13 PM
EMC2

Hands OPB vision clarifiers

Quote:

Originally Posted by Onepagebook

ya , I am also kinda lost, cuz what my post has 2 bios only, only 390-2 and 310-2.

The 310p is on DFI's beta BIOS site ;)

Show 100 post(s) from this thread on one page