Dont you think vDimm from 3,3-4,0 will be enabled after setting some Expert Mode or something. Seems strange with a spectra that starts as high as 3,3 volt.
Printable View
Dont you think vDimm from 3,3-4,0 will be enabled after setting some Expert Mode or something. Seems strange with a spectra that starts as high as 3,3 volt.
Oh the Vcore will be usefull :D
Im not a guru like OPP to make my own cascades, im sure i would try if i got a FAQ/walkthrough (wink wink hint hint ;)), so untill further notice it will only be a VapoLS, around June. My chip isnt the best, but it should do some 3400 @ 2.1Vcore :)
Cant wait untill Venice :D
I don't make my own Cascades. PCIce makes my cascades.Quote:
Originally Posted by TS_PHI_PERRY_78
If I did make them, they would be the best:cool:
OPP :cool:
I've skipped over several mobos waiting to upgrade my A8V 1.02, this looks like a winner so far! :bounces:
:rocker:
The Dual Xpress Graphics Function supports the following:
Two PCI Express x16 Graphics Cards"
Does this mean X800XT in Dual mode? :banana4:
$299USD and they'll sell out faster than believed possible......
:(
C
WHAT ? :confused:Quote:
Originally Posted by charlie
Well I know Im gonna have one, and I dont care what it costs.Quote:
Originally Posted by charlie
so i can select 3.5vdimm to VX ram and it will be okay without any extra coolingQuote:
Originally Posted by Jessfm
would ocz 520w PSU be okay for that ?
Insane board!! I do need to get a rid of my MSI now and buy a DFI+PCI-E card(s).
Well im just looking for a place in sweden to preorder the mobo:
3500+ Winchester, OCZ PS 520W and a 6800GT is ordered. Just cant decide if i should change to a X850XT or not :(
Now the question is, which boards are ye getting?
http://www.xtremesystems.org/forums/...chmentid=22020
And it'll be worth EVERY penny.
The "Definitive" motherboard has arrived.............
Quote:
Originally Posted by Nube
OCZ 520W better be OK with it, that's what I have:D
OPP
Looks like nF4 SLI-DR to me :/
What is UT anyways? Obviously NF4 SLi-DR is better than UT NF4-SLI-DR as its the top model :|
Ut mean the board only,like any other mb maker sell
the normal lanparty come with everything,cable,pc transpo,etc
hummm I got a X800XT being replaced thats AGP I could trade that in for a PCI X800XT
two questions
1. would a X800XT pci card work on this??
2. my 3700eb is stable on my A8V at 3-2-2 @ 247 and 3-2-3 @ 259 with 2.8ish volts. What would you guess my EB could run with 4v avil to it???
1)The X800XT will work no problem.Quote:
Originally Posted by iboomalot
2) I don't think EB will like that much voltage, wild guess says around 280MHz with about 3.5V.
OPP
I want to see what it will do with the same parts Opp had in the neo2 the bh-5, fx55+x800xt at the same clocks in 3dmark 2001 ;)
I wonder if it will be as fast, faster or slower :).
What does: "Diagnostic LED connector" and "FronX" mean??
The cheapest I can't afford :mad:Quote:
Originally Posted by TS_PHI_PERRY_78
Diagnostic LED connector is probably something like MSI's D-Bracket leds. FrontX is a front bay device with all the handy connectors (USB, audio) upfront...Quote:
Originally Posted by Dirt
:YIPPIE: THANK YOU VERY MUCH FOR THE MANUAL :YIPPIE:
I'm sure that this will change the lives of many people...
Well..lets see about that. Specs are nice, but I have only seen 1 bench so far and it didn't give a clear picture. So we really know nothing about this board other than it has potential on paper ;)Quote:
Originally Posted by charlie
The only thing that makes me cheer atm is the fact that Oskar has been involved in the design :D
With the risk to be laughed at... who is this Oskar fella?
D O S: Okey. I need the DFI UT nF4 SLI-DR then :)
Oscar_Wu from some french forum right?