Printable View
Temps are fine for the stocker cooler. 38-43c. I'm going to try a better manufactured hsf setup early next week and then play with the vcore. If I can get 2.5 stable on air out of this chip I'll be really happy...and I think it may be possible (the sky is the limit of course...no need to stop until the chip stops me!! :banana: )Quote:
Originally Posted by Mathias-K
Hi everyone, I'm k-ohashi = kyosen :)
Here are my new results of i855GMEm-LFS over-clocking.
Now nearly 1.7V is available for Vcore.
I could run the system at over 2.9G by natural air-cooling(17degree centigrade).
Vcore-mod by VID changing
<img src="http://219.113.251.125/c-board/file/i855GMEm_Vcore-64step.jpg">
SuperPI 1M@over2.9G
<img src="http://219.113.251.125/c-board/file/26s_PenM765_AOpen_2933.00.png">
If you can understand japanese, visit my BBS:
http://219.113.251.125/c-board/c-boa...ne;no=3154;id=
Thanks
Extreme!!! :toast:
Time: 23s (Original Superπ 1M)
Clock: fsb 184.3MHz x18 ＝ 3318.2MHz
M/B: Aopen i855GMEm-LFS R1.00 / BIOS:R1.01(10/6/2004)
CPU: PentiumM 765 2.1GHz SL7V3 (7424A594)
CPU Cooling: LN2 (Pro3＋Torii-kun！for P4)
Memory: SanMax SMD-51228B-V (Winbond BH-5 3339WF) 512MB x1
3:4, CL2.0-5-2-2
VGA: ATI rageXL (PCI)
HDD: IBM DTLA-307015
Power Supply: Zippy-460w
Vcore: 1.66V, Vio: 3.65V
Vddr: 3.20V (OCZ DDR BOOSTER)
OS: Windows Server 2003
<img src="http://u-san.net/c-board/file/M765-ln2-3318-23.gif">
Extreme , that is a insane score man .
Congratulations for the 23s .
I´m amazed with the power that 3318 pentium m showed .
Guys with te fx55 ´s fear this man .
Don´t let in get an good vga card .
Congratulations once more
Kyosen, that is an explosive result man :explode:
Congrats!! :worship:
\o_ , nice :)
awful lot resistors u have removed :o
but i think the chip needs more voltage :D
holy cow thats fast.. Do I smell a WR comming up ? :D
superb job there k-ohashi
wow very nice thats the right way. ;-)
That's magnificent, Kyosen! You are truly extreme! :)
If some manufacturer would open up their eyes and release board with some serious voltage adjustments!
Maybe a stupid question, but is any P4 cooler socket compatible? I read that it was the same bracket. :)
Wonderful overclocks from TAM and kyosen. :slobber:
Congratulations for both. :toast:
That two SuperPi's are amazing, 23 and 26 sec are just spectacular times.
We want to see more and more results, precisely a 3dmark score is possible.
I know that with LN2 that is very difficult but just go for it. :)
Again, more congratulations for you both. :toast:
Intel (at last) has a major response for AMD's FX in the Dothan's(Alviso,etc...) :banana:
:eek: :eek: :eek: That is the definition of extreme !!! OMG Kyosen keep up the good work !!!
I just have one question, dont the mobos you guys are using have PCI/AGP locks. Cause I imagine your overclocking + XT PE would ROCK THE ORB !!!
Though I imagine even the ordinary Dothan desktop system (with i855 mobo and 745 proc) would cost WAY too much for the normal consumer, unlike a mobile 2500 or something.
Perkam
For some reasons, ATI (or its driver) is not working all that well at AGP 4x with AOpen board. I got 23,465 points of 3DMark2001 with both 755 and X800 XT PE were stock. Check here: http://service.futuremark.com/compare?2k1=8228933. Plus, I got random Windows boot problem where my system will be stuck at Windows splash screen forever especially after a failed overclocking. I have tried several versions of ATI Catalyst. nVidia is working flawessly though.
Do you have more detailed pictures of the vcore mod?
Is there a other simpler mod available?
IS a vdimm mod available?
Hey, kyosen!
Is there any trick to get the fsb that high? :confused:
I'm stuck with my DFI at 145Mhz. :(
Already did some voltmods
- vagp/chipset to 1.7V
- vddr to 2.9V
- VID4-Pinmod for 1.6Vcore
...still no success in gettig it any higher.
Even at 1:1 with my Infineon PC2700 6-A ram which is good for FSB220+ at fastest timings there's no go -> errors out in SuperPi (test 5) or sudden reset in Windows.
This happens no matter what multi i have set in bios.
12*145 crashes as well as 17*145. :bsod: :bsod: :bsod:
Hi,
Mathias-K,
> is any P4 cooler socket compatible?
--
2mm or so thickness metal plate must be inserted
between P4 cooler and core.
OneProdigy,
> Is there any trick to get the fsb that high?
> I'm stuck with my DFI at 145Mhz.
--
I expect that you are using Radeon, don't you?
As H2OGun mentioned it, nVIDIA's VGA is more robust
than ATI's at i855GME mb, I also think so.
In my worst case, the system goes unstable at mere 135MHz
with Radeon9200 VGA.
...Try GeForce ;)
Kyosen does have a simpler mod. Check out his BBS mentioned in his previous posting and you'll see some mod pictures. I've tried it myself and it only gave me around 1.45v vCore max.Quote:
Originally Posted by jan
I've also tried his latest VID deceiving mod posted above. It did work. I got vCore all the way up to 1.708v even though BIOS reported lower numbers. IMHO, this mod is really the way to go for this AOpen board.
Kyosen, would u like to have an utility which detects if the throttling is activated or not?
COPYRIGHT Franck Delattre
send me a MP if u r ok
kyosen or anyother with the AOpen board,
Could you answer a few questions regarding the AOpen i855 board?
Whats the easiest way to get 1.7v of vcore? Also can I use a S478 waterblock on the AOpen board?
Is it possible to connect the vdimm directly to the psu's 3.3v rail?
Hope you have the time to answer my questions. :)
I think the easiest way to adjust vcore is to perform the modification pictured a couple posts above...by Kyosen. You can use a s478 wb but you've got to be very careful because it's pretty easy to chip the core. My solution was to use a heatspreader from a s478 chip and put it over the P-M core.Quote:
Originally Posted by KPJ
_Siph
Quote:
Originally Posted by cpulloverclock
How come the CPUZ says its a 560 775 ??? Is it really CPU-Overclock ??
Perkam
kyosen, keep us posted with the results man...and of course, congrats...
Quote:
Originally Posted by OneProdigy
Interesting. I have the exact same problem w/ both the DFI & AOpen boards. RAM I am using PQI Turbo 3200 TCCD -431F, 815 Brainpower boards (512MB ea.). And video card is 6800LE. I've tried with timings all the way to 1:1 as well..with a 1.6G & a 1.7G. Same result...On occasion I can get into windows above 145 but it either freezes, usually right after arriving into Windows.
and although I havent tried using the booster on the DFI, I tried in on the AOpen w/o any success ;-/
http://u-san.net/c-board/file/M765-ln2-3318-23.gif
Dang, I still havent gotten over than one Kyosen !!! WOW !!!!
Though, when are you gonna post some 3dmark01 or pcmark or anything at stable speeds or is it not possible with the dothan, cause with the result above, you're making an FX-55 look bad !! :D
Perkam
Hi,
I am very impressed about the results. 3,3 ghz is really a nice clock for a Dothan Core.
I'm going to overclock a Pentium M 745 (1,8) processor with a combo of TEC (maybe 2 cascades) module and the Thermalright XP-120 cooler. V-Core Mod is no problem (i will use the VID4 Mod), but i cannot find detailed pictures and tutorials about VDDR and VIO chipset voltage mods for the AOpen Board.
Can anybody post some detailed pictures from VDDR and chipset voltage mods on this board?
Thanks alot,
BitpowerPM