hipro, what about for abit kv8/ pro mobos with only 2 dimm slots? i wonder if theres another way to interface with dimm voltage
Printable View
hipro, what about for abit kv8/ pro mobos with only 2 dimm slots? i wonder if theres another way to interface with dimm voltage
looks good hipro!
what about the 5.2" panel? got it ready?
i think you should make it an extra part that doesnt automatically come with it since not all people need it and would like to save money.
I want one now :)
LolQuote:
Originally posted by hipro5
Shi(f)t Samael....Your flag is a lot biger than mine on your avatar....... :D :toast:
Fell free to use the same avatar if you like it :D :toast: :D
(but size doesnt matter any ways... :p: )
Sorry there is no solution about that....exept starting soldering cables from Maximizer to the mobo.... ;)Quote:
Originally posted by reject
hipro, what about for abit kv8/ pro mobos with only 2 dimm slots? i wonder if theres another way to interface with dimm voltage
Thanks.... :)Quote:
Originally posted by saaya
looks good hipro!
what about the 5.2" panel? got it ready?
i think you should make it an extra part that doesnt automatically come with it since not all people need it and would like to save money.
As for 5.25 panel , I think a user of our local forum has gave us a good and cheep solution......In white and black colors can be found..... ;)
http://www.thelab.gr/attachment.php?s=&postid=77176
LINK OF IT.....
hipro, do you have the voltage stabilization that the OCZ booster features to provide "cleaner" power to the RAM?
Not to answer for Hipro because he's way ahead of me in the intelligence area but I'd assume his power is filtered so it could be said(if he wanted to) that the voltage of his device is "cleaner". :shrug:
(power filters are not anything new... in fact they date back to before the big bang) ;)
No I have NOT built their cirquit on it.......It's completely different.......All I can say is that the Maximizer is full of big electrolytic capacitors and RF chokes (rounded ferrite beds with coil - ex. as mobo's chokes for VCore) ALL over the circuit....Stabilization though is another thing than filltering...Stabilization is for the voltage not to drop or going up and down with the loads and filltering(that matters a lot too) , is for this voltage to be "clean" without any spikes e.t.c..... ;)Quote:
Originally posted by cetoole
hipro, do you have the voltage stabilization that the OCZ booster features to provide "cleaner" power to the RAM?
A little bit more, and you could do a kind of adapter that goes in the AGP slot, and you connect your Video Card on it, and you can control the voltage:D. But I doubt it whould be possible since you need to regulate the voltage from the IC....
you mean vgpu and vddr? impossible to control from the agp slot, except for very old cards like g2mx maybe wich dont have self regulating circuits.
maybe some cables in the package that are ready to be plugged into mobo... i wouldnt mind paying extra :cool:Quote:
Originally posted by hipro5
Sorry there is no solution about that....exept starting soldering cables from Maximizer to the mobo.... ;)
That is no problem at all....and no extra money needed.... ;) :DQuote:
Originally posted by reject
maybe some cables in the package that are ready to be plugged into mobo... i wouldnt mind paying extra :cool:
Nice!!!1 so i would plug into the dimm pins of onto fets?
hipro your just a regular dude thats turning into a overclocking company!!!!
Liking how this is progressing so far. Now here is the big Q.
Does it use -5v rail...? OCZ DDR booster doesn't work with PSU without it and any 12v ATX v2.0 I've seen doesn't carry this... -_-;
Something to consider defiitely.
[EDIT] Found out they use it only for display... hopefully you are not using -5v line for anything :P
Read my LAST sentence. You will understand that I knew it already;)Quote:
Originally posted by saaya
you mean vgpu and vddr? impossible to control from the agp slot, except for very old cards like g2mx maybe wich dont have self regulating circuits.
you said you doubt it, not that you know it wont work. if you knew it wouldnt work then why did you post about it? :PQuote:
Originally posted by skate2snow
Read my LAST sentence. You will understand that I knew it already;)
hipro, if you can just leave some small spikes on the maximizer where people can solder or plug their cables to. then people can solder cables or use those grabbers to connect the maximizer to the boards without even soldering! and they dont lose a memory slot!
any updates or progressions so far? :)
NO adaptors for DDR Maximizer needed.......It feeds through a regular 4 pin conector through PSU as our CD Roms , Hard disk , e.t.c. , are feeded......No worries about that.......It "produces" it's own -5Volts from an internal oscilator.... ;)Quote:
Originally posted by jinu117
Liking how this is progressing so far. Now here is the big Q.
Does it use -5v rail...? OCZ DDR booster doesn't work with PSU without it and any 12v ATX v2.0 I've seen doesn't carry this... -_-;
Something to consider defiitely.
[EDIT] Found out they use it only for display... hopefully you are not using -5v line for anything :P
I have already figured about that......Someone who knows what he is doing , can cut the conector that goes from front panel to the DDR PCB cirquit and solder those cables at some particular spots on mobo......With this way we have all of our Ram banks free......With this way also , we can built a "Multicontroler" that could control : VAGP , Vmem , VTT , Vchip , e.t.c. .... ;) :DQuote:
Originally posted by saaya
you said you doubt it, not that you know it wont work. if you knew it wouldnt work then why did you post about it? :P
hipro, if you can just leave some small spikes on the maximizer where people can solder or plug their cables to. then people can solder cables or use those grabbers to connect the maximizer to the boards without even soldering! and they dont lose a memory slot!
Grabbers won't help as for the Rams coz at 3.6Vmem(Vdimm) a SINGLE 256MB with 8 chips on board and at full load , it needs at least 3 - 3.5 Amps of power(current).... So if you have a 2 x 512MB Rams and 3.6Volts , you'll need at least 12 Amps of power....I think that no grabber could handle such a current....So the only way is the cables to be soldered on mobo.....
Be pattient....I have also other work to do..... ;) :)Quote:
Originally posted by ns_ripper
any updates or progressions so far? :)
NOICE work my greek man.
soldering is no problem for me, im just worried, are there any chip or mo'fets on mobo thqat could be heatsinked? i mean vdimm mosfets? is it a good idea for me to get some good ramsinks and just coat my board in them, on the importtant places of course.
also, what does vagp gain?
I just posted it because....... I dont actually know why.....:D.
Hipro, something could be done for the no soldering..... You could start some kind of plastic "blocks", and make holes in it that will fit the pins of DDR slot backside, and make wires go to it, and could sell it the same way the Font panel is sold....
im definately gonna want one of these maximizers when you finally release them. hopefully it'll work with that new DFI nf3 250gb board.
Hipro5, don't forget to test hardly the DFI Lanparty mobos cos that OVP issue that ocurred with the ocz booster.