OCZ DDR Diagnostic Booster Works on these Motherboards.

Printable View

Show 100 post(s) from this thread on one page

08-29-2004, 06:36 AM
jiff

Quote:

Originally posted by goddh0r
Anyone tried on Asus K8N-E Deluxe yet? :)

Ditto, need more than 1.7 for my ballistix to get to 260. 245 on 1.7 2.5.2.2.5 is bloody good
08-30-2004, 06:11 AM
Narbo

I installed mine over the weekend. As expected works fine on the regular P4C800 Deluxe. You can use slot 2 or 4. I used 4 as its easier to see the LED readout. I did not test the upper limit of adjustment but it will do at least 3.3V fine.

I managed to get 243Mhz 1:1 2.5-3-3-7 stable (12 hours of Prime 95) on my OCZ 3700 Gold Rev 1 at 3.0V. I also managed to lose my SATA RAID array (neccsitating a windows re-install) by fooling around at 250Mhz 1:1 so as usual be careful!
08-30-2004, 01:26 PM
Juspriss

Quote:

Gascogne: Would also very much like to know how the booster works with MSI K8N Neo2 Platinum.

What? :confused:
I would know if someone have tryed the Booster on this mobo, and if it works :D , nothing more ;) .

Have anyone tryed them? :toast:
08-30-2004, 07:58 PM
Gascogne

Quote:

Originally posted by Juspriss
What? :confused:
I would know if someone have tryed the Booster on this mobo, and if it works :D , nothing more ;) .

Have anyone tryed them? :toast:

Im getting a booster this week, so I can give it a go on my mb and let you know. :)
08-31-2004, 02:37 AM
Juspriss

@Gascogne: Tnx! :toast:
09-01-2004, 06:03 AM
Gascogne

Ocz booster works nicely with MSI K8N Neo2 Platinum. :)
09-01-2004, 11:00 AM
seb87

Quote:

Originally posted by Gascogne
Ocz booster works nicely with MSI K8N Neo2 Platinum. :)

you think...i buy that mobo and from a sponsor arrive to me the booster

what is the max woltage on the msi k8n neo2 (soket 939) ??
09-01-2004, 03:10 PM
Juspriss

Quote:

Ocz booster works nicely with MSI K8N Neo2 Platinum. :)

Tnx a lot Gascogne! :toast:
09-01-2004, 10:52 PM
Gascogne

Quote:

Originally posted by seb87
you think...i buy that mobo and from a sponsor arrive to me the booster

what is the max woltage on the msi k8n neo2 (soket 939) ??

Max in bios is 2.8v and I haven't tried max with the booster yet but Im doing 3.2V now with it and no problems at all. :D
09-04-2004, 03:13 AM
Gascogne

Quote:

Originally posted by seb87
you think...i buy that mobo and from a sponsor arrive to me the booster

what is the max woltage on the msi k8n neo2 (soket 939) ??

Tested up to 3.4v with the booster and no problem there. :)

Just good to have some fan to blow some air on the booster like it says in the manual. ;)
09-13-2004, 11:30 PM
Av3ng3r

We reviewed the DDR Booster.

http://www.hardwaredome.nl/reviews/view/11

Have fun with the review :)
09-14-2004, 04:37 AM
RocKer

Enybody got an idee how long it will take to have de booster back from rma,its now about 10day's away.
09-14-2004, 04:20 PM
some_young_guy

Quote:

Originally Posted by mad mikee

Yeah you can put the booster in slot 1 but if you try the mem in any other slot w bios F3, can't set OC settings (hangs, then on reset is back to defaults) Also pot runs into memory if in slot 3 and 1 stick only (no good) in slot 1. Same problems w/ VNF-250 (can't boot w/ booster in slot 1)

So this is a waste of my money, going to VDIMM mod the board, will still be better than nothing which is what I get w/ this.
:upset: :bsod: :grr:

I got the K8NS Pro as well. I'm able to run super pi at 259 fsb 1:1 2-2-2-5 with my BH-5 in slot 3, booster in slot 1. No problem whatsoever. But I can't even bench 3dmark or aquamark past 218 fsb with the booster at any any voltage! Oh well, where's that soldering iron?
09-18-2004, 06:55 AM
Try-this

Quote:

Originally Posted by Soltani

Does the OCZ booster work on a Albatron PX875P Pro??

Did anyone find out about this?

cause I just bought this mobo, and a great P4 cpu, so I would like to know i the OCZ booster works on this mobo ;)
09-18-2004, 10:30 AM
dutchman.pt

Does the Booster work on the DFI Lanparty Nforce3 250Gb socket 754 ?
09-19-2004, 04:53 AM
CCC

Quote:

Originally Posted by jiff

Ditto, need more than 1.7 for my ballistix to get to 260. 245 on 1.7 2.5.2.2.5 is bloody good

Yes i just tried it in my asus k8n-e and it works fine... tried all the way up to 3.4v so far.... hyperx is getting to hot at 260mhz 1:1 2,5,2,2, gotta dig out my 120mm delta to cool it off :)
09-19-2004, 07:54 PM
Manoj

Has anyone tried the OCZ DDR Booster with the Asus A8V Deluxe (Rev 2.0)? I know that rev 1.02 is not compatible. Any info on the rev 2.0?
09-20-2004, 11:57 AM
Five-Seven

the booster works fine on shuttle an51r :)
09-20-2004, 07:55 PM
Section8

Quote:

Originally Posted by Manoj

Has anyone tried the OCZ DDR Booster with the Asus A8V Deluxe (Rev 2.0)? I know that rev 1.02 is not compatible. Any info on the rev 2.0?

Anyone? I would also like to know...
09-23-2004, 06:11 AM
Tom Holck

1 Attachment(s)

Quote:

Originally Posted by yuri

Why has no one tested this on a sk8v ?

its only the best motherboard on the planet :D

Here you are yuri

SK8V at 4 volt benchstable OC !
btw: Its AMD WR in Superpi M8 :banana:
and nr 6. total:
http://www.biwa.ne.jp/~yok/838RANK-NEW.htm
09-24-2004, 01:15 AM
Minnyboy

Works on S754 K8NSNXP with 2 x 256MB & 2 x 512MB XMS3500 as well.

Currently typing with DDR Booster in Dimm 1 & 2 x XMS3500 in slots 2 & 3.

Thight squueze but it manages.

Funny thing is that the K8NNXP & K8NSNXP have the same layout but on OCZ's website, they say that you can only use 1 DDR with the Booster in place.

Could it be that the Corsair XMS modules heatspreaders are slimmer than the "other" heatspreaders??

Can't try with other brands as I don't have anything else but my beloved Corsair XMS BH5's.... :banana:
09-24-2004, 03:45 AM
PnoT

Has anyone tried this on an IT7 MAX2 board? I'm currently debating on whether i should upgrade or not atm. I have an old p4 1.8a running at 2.7 with air plus a few sticks of corsair (cmx256a-3200LL) that are bh5. My problem is i can't attain a high bus due to my x18 multiplyer. What chip can i buy relatively cheap that would get me up in the 200fsb range and how many volts can i push to these bh5 sticks with the DDR Booster? Thanks in advance.

http://members.cox.net/pnot/cpuz.jpg

http://members.cox.net/pnot/cpuz2.jpg
09-24-2004, 05:49 AM
Razor_cut

Quote:

Originally Posted by Gascogne

Tested up to 3.4v with the booster and no problem there. :)

Just good to have some fan to blow some air on the booster like it says in the manual. ;)

Howdy Gascogne.
Do you use DC? Since Im curently waiting for my mems, I would like to knom which slots u have the booster in and the mems.

The best choice would be:
Slot 4:Booster
Slot 3:
Slot 2:512\____ DC
Slot 1:512/

Or how do you run it?
09-25-2004, 01:39 PM
Kunaak

just incase anyones wondering.

the OCZ booster works great on the Gigabyte K8NS Pro.
works even better then the actual Vdimm mod.
I been able to hit 3.8 volts on the ram with little to no problem.
with my Vdimm mod, I can't load the OS past about 3.1 volts, but with the DDR Booster it loads just fine, even at 3.8 volts.

I found no problems with it one this board. good solid combination.
09-27-2004, 03:51 AM
arj

Quote:

Originally Posted by dutchman.pt

Does the Booster work on the DFI Lanparty Nforce3 250Gb socket 754 ?

I would like to know this as well. MIght pick up the board soon.

Show 100 post(s) from this thread on one page