Will we ever be able to edit ram voltages using your bios utility?
Printable View
Will we ever be able to edit ram voltages using your bios utility?
Here is a copy of my PNY 6800 GT BIOS for your site, keep up the great work!
eVGA 6800 Ultra BIOS
For those of you that don't want to check I compared all the bioses linked in this thread, except all the ones from mvktech.net theres too many.
Mine and "N345" (the 6800 Ultra not UE) are the newest revision:
5.40.02.15.07, my eVGA BIOS might be different in some way but I guess its just trial and error to see which is best.
well somebody have a POV 6800 GT?
what bios uses?
Well I would like to announce that xtremetheme has again updates his great tool. And I would also like to thank him for the great work :-)
We are now at Release 1.4.
You can find the download at http://www.mvktech.net
Direct Link :
OmniExtremeEdit FX v1.4 - At mvktech.net
Release 1.4
--------------
- added display of effective memory speed, as it confused some people
- added support for 6800LE, Quadro FX1000/FX2000/FX3000
So with the latest update 1.5v in the tool = 1.5v with a multimeter?
Also the newest revision I've seen (checked with version 1.4) is 5.40.02.15.07 my eVGA6800U and the N345 BIOS are this revision. Do the Ultra Extreme BIOSes seem to clock better regardless of their lower revision?
I had a scan and i couldnt see any concrete resuls of improved overclocks with 6800GT's. What boost in stable core mhz are you guys getting by using 1.5v?
could someone tell me, where the measurement-points vor the VGPU on a GF6800Ultra are ? :)
Sorry i dont think so. :(Quote:
Originally posted by EnJoY
Will we ever be able to edit ram voltages using your bios utility?
For the 6800U it should be correct since v1.0. :)Quote:
So with the latest update 1.5v in the tool = 1.5v with a multimeter?
"xtremetheme" i download the new version of your program 1.4 (very good the memory calculator), but i see the following.... where is the 1.5v?
And at the FX5700U the VGPU doesn't work...
As far as I know the 1.5V is only for 6800 Type of BIOS/Cards.Quote:
Originally posted by DMylonas
"xtremetheme" i download the new version of your program 1.4 (very good the memory calculator), but i see the following.... where is the 1.5v?
And at the FX5700U the VGPU doesn't work...
All the 5 series only can go till 1.4V.
I think its working, I don't have a multimeter tho, guess well have to wait for someone to check with that, before my stable 3dmark03 bench was 455mhz now its 470mhz, helped me break 14k :)
xtremetheme is it possible to set 1.6v through bios?
Quote:
Originally posted by DMylonas
"xtremetheme" i download the new version of your program 1.4 (very good the memory calculator), but i see the following.... where is the 1.5v?
And at the FX5700U the VGPU doesn't work...
Thx, i correct the VGPU Bug with 5700U.
Sorry, not that i know of.Quote:
xtremetheme is it possible to set 1.6v through bios?
No, 5xxxx cards can also have 1.5V, but not all cards support.Quote:
As far as I know the 1.5V is only for 6800 Type of BIOS/Cards.
all FX5900 support 1.5V
my old FX5900nU and XT did :) (both flashed with FX5950Ultra-Bioses)
Damn, I guess I'll need a voltmod has anyone done the volt mod yet?
ah, ok...xtremetheme, your 'backupx2.rom" does not have a 1.5v setting, yet when I flashed with it (2month ago maybe), i got my core to 500+, so it was noticable difference. Any thoughts?
opening the rom with v1.4
2nd edit, you are smarter than I, lol
edit: question has been answered by "mavke's friend" lol,
Mavke, please check out your thread at guru on this, people are coming to your defense immediately, including myself. Hilbert has been made to look rash in his decision. We want your posts back there, as it is hard enough to wade through the noobery enough at guru
East bay area!!! Sweet, i'm from santa clara county....yes people have volt modded all these cards...if you are watercooled, and use the 1.5v setting, your 6800 should be hitting close to 500 core.Quote:
Originally posted by aoc007
Damn, I guess I'll need a voltmod has anyone done the volt mod yet?
I'm getting the NV Silencer 5 ;) Anybody know if these cool the 6800s ram also? If it doesnt Im gettting some bga sinks.Quote:
Originally posted by drcrawn
East bay area!!! Sweet, i'm from santa clara county....yes people have volt modded all these cards...if you are watercooled, and use the 1.5v setting, your 6800 should be hitting close to 500 core.
no, it says it does not cool the ram. a lot of ppls are talking abou this, but i would seriously wait i f i were u and see if they can even outperform the stock reference ultra cooler....Quote:
Originally posted by aoc007
I'm getting the NV Silencer 5 ;) Anybody know if these cool the 6800s ram also? If it doesnt Im gettting some bga sinks.
my ram is cooled by the stock heatsink, very ugly, very effective....1.30ghz is no problem with no extra cooling. ddr3 runs cool...i think both the mem and core are fairly volt limited if u can provide even decent cooling, (e.g. basic watercooling setup)
I'm sure it cools better than the stock hsf given their track record with the vga silencer and it is made of copper, my vga silencer rev2 on my aiw 9700p feels alot heavier than the 6800.
YES, it DOES cool the mem.Quote:
Originally posted by drcrawn
no, it says it does not cool the ram. a lot of ppls are talking abou this, but i would seriously wait i f i were u and see if they can even outperform the stock reference ultra cooler....
my ram is cooled by the stock heatsink, very ugly, very effective....1.30ghz is no problem with no extra cooling. ddr3 runs cool...i think both the mem and core are fairly volt limited if u can provide even decent cooling, (e.g. basic watercooling setup)
check it out.....
http://www.newegg.com/app/ViewProduc...186-120&depa=0
Ah they finally updated the pics, I think the copper block could be bigger but then it might be too heavy. Uses all 4 mounting holes too, I'm glad I ordered one :toast: I dont think itll be here tomorrow but should arrive on monday I'll post results then, how much should lapping improve performance?
xtremetheme,
Would it be easy to add the ability to change the manufacturer ID of a rom, so that people didn't have to force the flash of a rom from another manufacturer?
Yeah sure i will add that. :)
Hey xtremetheme,Quote:
Originally posted by xtremetheme
Yeah sure i will add that. :)
I send you some mails and also the nVidia Quadro FX 4000 BIOS :-)
Can you support that one in the tool as well?
Regards,
Mavke