g8 thx :)Quote:
Originally posted by bigtoe
2x256 do clock better than 2x512
Printable View
g8 thx :)Quote:
Originally posted by bigtoe
2x256 do clock better than 2x512
That is damn nice! I am going to have to snag some of this for my next rig.Quote:
Originally posted by WesM63
LOL.. i have about 3-4 threads with my results in them... do i need post them here too? lol
2x256mb OCZ 3700EB, maxes out with 3-3-2-10-11-16 at 256mhz 5:4. (7x256mhz, 330HTT) 37sec super pi. Using Athlon 64 3200+ C0 Clawhammer and K8N-Pro.
245mhz with 3-2-2-11...
OH... 2.9V ;)
:stick: so you think a new technology is matured when the successor of the technology is already out and the successor of the successor is about to be released???Quote:
Originally posted by T07N
You have to wait until the Athlon 64 processors to mature. Give a year, or two. =)
amazing results! i hope i get a stick of that eb asap to review! cant wait :slobber:
Made a thread for this already, but I still don't know what it really is :confused: My PC3700EB won't run higher than 255Mhz 1:1 Not even at 3.3V. I tried all timings, from SPD to tight timings, but I can't get it to run at high speeds...
Can it be a setting or something? Or is it just that I got some bad memory :rolleyes: I have the Epox 8KDA3+ Vdimm modded.
could be all your board will do.
But even if I can run 275Mhz fsb 24/7 stable and 300Mhz for benching? Just have to use a divider then to get it to run, and that way it loses a lot of performance...
No no you won't. Try it and find out. My optimal settings are with a divider at 256mhz. It crushes 1:1 at 235mhz.Quote:
Originally posted by Chris85
But even if I can run 275Mhz fsb 24/7 stable and 300Mhz for benching? Just have to use a divider then to get it to run, and that way it loses a lot of performance...
Just read a thread about OCZ, that some memory is crappy, might be I have some of those sticks :rolleyes:
I think its your board...
....ditto, probably board.
C
yep... mobo
so, say I wanted 300HTT. What S754 board do i buy?
A few people have been hitting 300+ fsb with that mobo. A guy in this forum hit 320. You may have just gotten a bad egg, and might have better luck with another board.
Does anyone know when is the Aopen 250 board coming out?
EDIT-> Coolzero2k1 and some other peole are havign some success with the 8K3a+ in THIS thread.
What volts and timings are you running on the 3700 EB. I think we are having some unreal excpectations here. If the memory was good for 275fsb we would sell it as PC4400 EB. 233mhz at rated timings of 3-3-2-8 are a given, 275fsb is not.Quote:
Originally posted by Chris85
Made a thread for this already, but I still don't know what it really is :confused: My PC3700EB won't run higher than 255Mhz 1:1 Not even at 3.3V. I tried all timings, from SPD to tight timings, but I can't get it to run at high speeds...
Can it be a setting or something? Or is it just that I got some bad memory I have the Epox 8KDA3+ Vdimm modded.
An HTT speed shouldn't be hard to hit with any board. Now if your talking 300mhz Memeory thats a diffrent story.Quote:
Originally posted by boshi
so, say I wanted 300HTT. What S754 board do i buy?
my pair of 3700 EB dont even do 250 FSB on a p4c800 at 3,2 volts
they prolly only good for A64 :(
EDIT: update, well they just crashed after 10 minutes of prime95 blend test at 245, timings 3-2-2-5, 3,2volts.... and yes I have a fan over them
:( ill stop testing them cause i dont wanna get more depressed
That memory works pretty much the same on all systems. Did you read my post above?Quote:
Originally posted by Blaster
my pair of 3700 EB dont even do 250 FSB on a p4c800 at 3,2 volts
they prolly only good for A64 :(
I do 250fsb with my 3700 EB 2 x 512mb on a single channel A64 NF3-250 rig at 2.9v. The beauty is the tight tRP and tRCD timings I am running. The bandwidth is excellent. My BH5 does 220mhz with 2.9v
I have not played too much on the Intel myself. I'll throw my off the shelf (they literally pulled it from stock and shipped it to me) 3700 EB in my P4C800 tonight and let you know what I hit. I will only have 2.85v.
What timings are you running?
Try running them at 3-3-2-7. I'm sure your get at least 250Mhz out of them.
3-2-2-5Quote:
Originally posted by andyOCZ
What timings are you running?
why am i so unlucky with memories :(
Yes I agree, run 3-2-2-7. Don't go over 3.1v and have a fan blowing directly on them. If they get too hot it causes errors. I'm not too sure about guys doing over 250fsb. That's hard to believe in dual channel.
Blaster, I tested the 3700 EB on the P4C800D
I hit about 240mhz or so at 3-2-2-7 and 250+ at 3-3-3-7, all at 2.85v.
Try 3-3-2-7 (3-2-3-7-8 the way it shows in bios) and 3-3-3-7 and see what you end up with. You have more volts than I do. Remember it's Intel and the latencies are less important.
http://clientes.netvisao.pt/hjosefer...-250FSB-3v.jpg
:toast:
this is at 3v, with this voltage it does 255 as well
I then tried 260 with no luck
Now its priming at 258 but ive increased the vdimm to 3,23v :D
EDIT: thnx Andy and WesM63
My 3700EB doesnt respond to higher voltage...
3.05 is the same as 3.35V...
2.5 2 2 5 max 242mhz...3 3 3 8 about 260mhz thats metest stable speeds 1:1
Asus P4C800E
I am getting another 2 sticks this week
3700EB again... :D
the pair i got respond to volts, it does 255 at 3,0 volts
if I increased the vdimm to the max with unmodded PSU (3,26v) the maximum increases to 260 stable for over 2 hours of prime (I stopped the test)
261 fsb its crashs after 5minutes so its maybe 3D stable, 262 prime crashes after 1 min
http://clientes.netvisao.pt/hjosefer...0FSB-3,22v.jpg
some scores
http://clientes.netvisao.pt/hjosefer...260-scores.jpg
UPDATE: changed the PSU from the unmodded Enermax noisetaker to a superflower with 3.3 line at 3,48 and im priming at 264 :D, at 265 it stops after 2-3 minutes
Anyone know if the OCZ EB PC3700 can run stably at 2.5-2-2-10 at 200-210 range?