Printable View
here are some results with higher loads.
prescott really kills the mobo. the voltage is getting lower and lower. nevertheless 1,58V is still enough for the 90nm core.
do not look to much at the evap temps of LS. i guess my fluctuations came due to pressure on the temp sensor. might be something different as well.
sweet -15°C @ 150-160W.
E: why does cpu-z say 3.9ghz and mbm 4ghz?
MBM is not very accurate reading out cpu speed, esp. under load... :DQuote:
Originally posted by ant1
E: why does cpu-z say 3.9ghz and mbm 4ghz?
I bootet at 4,15GHz; noticed this was not prime stable and went down to 3,99ghz.
MBM always shows the cpu speed at the program's start and doesn't change it while cpu-z shows the current speed correct
I ran alittle test on my MachII with Fx-53 yesterday.
I ran Prime with the CPU at 3Gigs with 1.85V on Asus SK8V.
My mbm CPU temps read 10c, I was measureing the Evap at the CPU and it went from -40 idle to -24c load, the Promy LED evap reading under load was -43c.
I'm supose to get one these LSs, it's hard to believe that it can't do better then that, but we'll see.
OPP
I think with a slightly lower ambient temp to cool that R507 compressor, you would get much lower temps. Also, I think nVentiv's evap temps are actually much closer to the Vapo's than they seem.
roomtemp hardly affects the vapo LS. my room temp goes up to +35cQuote:
Originally posted by EnJoY
I think with a slightly lower ambient temp to cool that R507 compressor, you would get much lower temps. Also, I think nVentiv's evap temps are actually much closer to the Vapo's than they seem.
i've also tested very low fan speeds, hardly any difference.
however when i tried some delta fans, i got better temps about -2c lower with no fluctations on the evap.
i find it hard to believe the mach2 ST is better.
from what i've seen from others the LS should better by about -7c on the mobo sensors. from a p4 with 1.75vcore.
i should also say that it vapo LS works better with alot of vcore.
i actually get worse evap temps at stock!!
Yea I think it's tuned for a higher heat load which may change petervandamneds results.Quote:
Originally posted by Shane5578
i should also say that it vapo LS works better with alot of vcore.
OPP
but i've never heard of a system turned for high load not being able to work with a low load...
u might get problems like liquid return , but that's kinda irrelevant in the case of the LS..
Well I do know you can under charge a system and get great temps at a low load, but if you apply a tougher load it will bury the thing.Quote:
Originally posted by Ragnarok
but i've never heard of a system turned for high load not being able to work with a low load...
u might get problems like liquid return , but that's kinda irrelevant in the case of the LS..
You then add refidgerent to optimize it for the heavy load.
And next thing you know, the low load temps are not as good anymore.
OPP
Just ordered a LS. Let the benching begin :p
:thumbsup:
Good luck. :)Quote:
Originally posted by ant1
Just ordered a LS. Let the benching begin :p
i would really love to see a 200+W load on the LS just for Asetek saying that they specifically tuned the LS for a higher heatload. as far as right here and now, my CPU only reaches 115W, so the GT looks alot more promising.
They're not meant to compete with each other, totally different pricetags...Quote:
Originally posted by brwmogazos
well personally i feel sorry for the people that bought the LS right away and started to notice now that the GT wipes the floor off the LS...
Guys...how on earth do you change FFT in Prime95..??
I´m running v 22.12.1 ...and can´t find any option for it in the settings.
Quote:
Originally posted by Naughtyboy
Guys...how on earth do you change FFT in Prime95..??
I´m running v 22.12.1 ...and can´t find any option for it in the settings.
Download the latest version and when you select Torture Test, it's on the next screen. ;)
:toast: :toast: :toast: :toast:
Thanks. All I need now is a new videocard cause my 9700pro is dying...giving me artifacts and polygon errors even at stock speed. :(Quote:
Originally posted by SAE
Good luck. :)
Yeah. I noticed a decrease in artifact-free overclocks too :(Quote:
Originally posted by ant1
Thanks. All I need now is a new videocard cause my 9700pro is dying...giving me artifacts and polygon errors even at stock speed. :(
My 9800p could once do 500 artifact free with 1,86V... now it's never free from snow there. But I can still do 474/374Mhz stock with Swiftech 80W tec block and warm water free from display corruption ;)
Hope that LS rocks for you :D
So help me out peeps... Based on your opinion here are my options:
MachII ST + Enlight case US$ 749.98 + Front LCD US$ 89.70 Total USD $838
Or
Vapochill LS USD $1,049.98
Which one should I take? I am leaning towards the Mach II cooling performance between the 2 based upon this thread seems very similar.
Where are you getting that price??...Its USD $876.75 at Kit-Tronics.Quote:
Originally posted by phobix
Vapochill LS USD $1,049.98
what sort of load difference are we talking about here Opp? prob something around 50Ws?
I still dont think the load itself will make much difference, rather the unit itself..
Actually it was at kittronics but including the case. I guess it is probably better if I take it without the case hey... Just don't want a frankenstein looking rig...Quote:
Originally posted by Frank E. BoNeS
Where are you getting that price??...Its USD $876.75 at Kit-Tronics.
epowerhousepc.com is selling the LS for $828. Not sure thay have any more in stock, but that was the lowest price that I found. Fast shiping as well.
Finally have mine up and running with a 2.8C at 295 fsb. Haven't been able to get the control panel loaded atm, but working on it. vcore is 1.85 in the bios and the evaphead is showing -47 degrees at idle.
loaded window fine at 300 fsb, but when I rebooted the bios went to default. Strange. The nb was getting pretty hot and may have been part of the problem. I replaced the stock nb with a swifty and the bios problem seems to have gotten better. I'll try using clock gen. that might help as well. New territory for me being at that high of fsb