ASUS Z87 Motherboards - Overview, Guides and Official Support

Hero with mfr ss

With 125 strap

http://img694.imageshack.us/img694/4...nshot009ze.png

Uploaded with ImageShack.us

@ Dumo can you try 2666 (MFR /Samsung or CFR )@3000 on that mobo ?

Quote:

---

Originally Posted by XBrytanX

@ Dumo can you try 2666 (MFR /Samsung or CFR )@3000 or 2933 on that mobo ?

---

Testing it now. 125 strap make it easier for 2933/3000+ run. The settings above with mfr should be the same with most asus non rog boards depending on individual stick of mfr. Some needs 1.8V+ for 3000

Quote:

---

Originally Posted by Raja@ASUS

Same as 1007 but with multi core enhanced enabled by default. :-)

---

If I am not mistaken, MCE was enabled by default in 1007 as well.

Nice to hear that such an option deserves spending time to release new BIOS while not bothering to fix boot issue with smart card inserted in USB reader.

Quote:

---

Originally Posted by XBrytanX

@ Dumo can you try 2666 (MFR /Samsung or CFR )@3000 on that mobo ?

---

man did you try 100bclk @ 3000mhz mem? that is locked by intel it will never work. need 125bclk or 2933 plus some bclk

I did try 125 strap and 2933 ,Thanks bro
P.S. the only kit that does 2800 on this mobo is double sided CFR,the MFRss having hard time @2666 (XMP or not ),tried one stick closest to CPU =dito

Quote:

---

Originally Posted by Dumo

Hero with mfr ss

With 125 strap

http://img694.imageshack.us/img694/4...nshot009ze.png

Uploaded with ImageShack.us

---

2t give you any extra mhz? maybe worth it

^^Just testing the board on mem clocking

http://www.overclock.net/content/type/61/id/1508118/

nice bro, keep pushing :) got my oc panel while at computex, looking forward to trying it out :D

Testing Team Xtreem 2666 LV on Hero , finally DDR3 3000 MHz :)

Thanks Dumo!

http://img829.imageshack.us/img829/6...321214141t.jpg

Uploaded with ImageShack.us

Quote:

---

Originally Posted by Splave

nice bro, keep pushing :) got my oc panel while at computex, looking forward to trying it out :D

---

Thanks Bro:)

Some of my MFR went 55 @ 1.75V+:(

Quote:

---

Originally Posted by Fosco

Testing Team Xtreem 2666 LV on Hero , finally DDR3 3000 MHz :)

Thanks Dumo!

http://img829.imageshack.us/img829/6...321214141t.jpgAwesome run there Fosco

Uploaded with ImageShack.us

---

Awesome run there Fosco:up:

125 strap?

Quote:

---

Originally Posted by Dumo

Thanks Bro:)

Some of my MFR went 55 @ 1.75V+:(

Awesome run there Fosco:up:

125 strap?

---

Thanks :)

Yes 125 strap

2933 np at 100 bclk but no go on 3000 so I'll have to try 125 strap as well if it helps with mem clocking. Still @ 1.65v. G.Skill Trident 2800.

http://i1254.photobucket.com/albums/...psf98dee6d.png

4 DIMMS 2800 11-14-14-25-1T prime95 stable for 3 hours.

http://img7.imageshack.us/img7/2658/4x42800prime95.jpg

T-Topology 2.0 is also working fine on Z87, 4 DIMMS is slightly faster than 2 DIMMS

2 modules -- 6m 17.871s
http://imageshack.us/a/img62/2155/28001113132x4.jpg

4 modules -- 6m 16.562s
http://imageshack.us/a/img853/266/28001113134x4.jpg

Got my 3k, still 1.65v :)

http://i1254.photobucket.com/albums/...ps20d37751.png

Something wrong with the tWR user guide says max is 16
but MemTweakIT shows more than that.
afaik some mem presets are more than 16 too but you can never set it above 16 in BIOS.

Some of the registers revert the setting back to auto (disables the logic) - most of the time that's why they are left out of UEFI. The UEFI guys usually give us the full manual and possible range. I have seen this in the past with the third timing sets - where a setting of 9 reverts to the tightest setting allowed at the chipset level. Intel simply leaves certain bits open, and they don't always follow a linear scale.

TWR and wr to read deelay are derived from addition of other timings and hence not shown in the bios box and thus what is keyed in in bios may get overwritten by your other timings

Bios 0017 awesome.
Mobo dead n stuck n code 78.
Was just priming 2250c7.
Before that already noticed my g19 was behaving oddly during bootup.
Second bios also cannot boot.

Clear cmos now with no power n waiting 20mins
Shld be ok after this. Odd same timings were ok on 0503.
Onething sham this bios make my g19 keyboard del key into the bios slightly unresponsive even with power on the keyboard.

Nope. 20 mins not helping with the bat off. A pain with it under a gc. Proceeding for an hour or 12hrs.

Bat n cpu removed. Wait overnite. So many torrents to seed.

try usb flashback ,should work.usually corruption is hard to achieve but you may never know...were u running very tight subs and tertiary?

Bios 0020 M6H

Boot up setting


http://img27.imageshack.us/img27/2999/fzz.png

Uploaded with ImageShack.us

I think 78 might be cpu related, something with the DMI/PCI subsystem maybe as when I was getting this code on the M6E, the vga light was on as well.

I swapped cpu's and no issue so might be a degraded damaged cpu, best to swap with a known good cpu and verify.

Quote:

---

Originally Posted by Alex-Ro

try usb flashback ,should work.usually corruption is hard to achieve but you may never know...were u running very tight subs and tertiary?

---

Yeah kindda. Aida read/write/copy was close to 35.6k/35.4k/35k.

Mobo is a goner. Tried everything i know. Lol first time asus mobo since maximus 2 formula i can say a bios killed my board.
Will try to get a new one today.
Sham/raja. Can i have bios 0503.
Dont think current batch will have it.

Ty.