Gigabyte X58A-UD3R/Extreme Discussion Thread

Printable View

Show 100 post(s) from this thread on one page

04-26-2010, 04:47 PM
davelakecity

Yeah, my chip can't touch that..
I still have some tinkering to do tho...
Thanks for the info.
04-27-2010, 07:06 PM
sRHunt3r

Quote:

Originally Posted by In-Fluence

Definitely nice temps! I'm looking at replacing my Black ICE 240 for and RX240 rad, I see you have the 360 model, any idea what the flow resistance is like?

I will have my flow meter,temp sensors and controller tomorrow but I will not be able to install it until Thursday. I will post my results but I warn you that they will be skewed as my RX360 is mounted outside my case with quick disconnects on the outlet of a 14k btu stand alone A/C unit.
04-27-2010, 07:15 PM
radaja

heres my latest,i only ran it for an hour because theres a thunderstorm brewing and i need to turn
off the computer.going to run linx on my x64 install to join the 4.5Ghz linx club next.:up:

□□MB□□-Gigabyte X58A-UD3R
□□CPU□□-i7-920 #3845B027
□□MEM□□-G.Skill DDR3-2200 cl7

21x215@4515 w/HT on DDR3-1720 8-8-8-21 1t
Prime95 blend 1hr running
http://i39.tinypic.com/e17v3p.jpg

Prime95 Blend 1hr stopped
http://i42.tinypic.com/2vweide.jpg
04-27-2010, 07:25 PM
sRHunt3r

Congrats Radaja! Nice run and temps:)
04-28-2010, 05:01 AM
cowpuppy

OMG :eek: radaja you hit it out of the ball park :clap:

Whats your cooling agian? Water? Chilled?

I see your only in Dual Chanel will it run like this in triple channel?

I backed mine down to 4.2ghz w/HT on and lowered my vcore and Qpi/vtt
04-28-2010, 06:32 AM
radaja

sRHunt3r and cowpuppy,thanks guys.well im running water with AC.as for the dual channel,i have to run it this was because
i've only got a 2x2GB kit at the moment.the g.skill DDR3-2200 7-10-10-28 kit.im hoping to sell these soon and get a triple channel kit.
but im pretty sure i can get the same clocks with triple channel,might have to raise the vtt?

heres my linx run and an updated 2hr prime blend run

http://valid.canardpc.com/show_oc.php?id=1155708

21x215@4515 w/1.37v DDR3-1720 8-8-8-21 1t
LinX 20 runs completed-Vista x64
http://i42.tinypic.com/o044ms.jpg

Prime95 Blend 2hrs running-XP x86
http://i43.tinypic.com/2mzll74.jpg

Prime95 Blend 2hrs stopped-XP x86
http://i39.tinypic.com/awyjux.jpg
04-28-2010, 10:17 PM
hicookie

looks that chip very strong, also curios what cooling you are using for 920
04-28-2010, 11:34 PM
In-Fluence

That's looking real sweet, hope mine goes that far!
04-29-2010, 08:30 AM
hicookie

Gskill 2000 6-9-9-24 Setting with GIGABYTE X58 980X

would like to share my setting of GSKILL 2000 6-9-9-24
The setting is for 24/7 daily using with air cooling system

http://j.imagehost.org/0521/gskill_200_2000-2.jpg

tested on UD3R, 200/2000 6-9-9-24

BIOS setting

>Advanced CPU Feature------------------------------[Press Enter]
CPU Clock Ratio --------------------------------------16X
Intel(R) Turbo Boost Tech.---------------------------- [Disabled]
CPU Cores Enabled------------------------------------- [All]
CPU Multi-Threading---------------------------------- [Disabled]
CPU Enhanced Halt (C1E)-----------------------------[Disabled]
C3/C6/C7 State Support------------------------------ [Disabled]
CPU Thermal Monitor--------------------------------- [Disabled]
CPU EIST Function--------------------------------------[Disabled]
Bi-Directional PROCHOT------------------------------ [Disabled]
Virtualization Technology----------------------------- [Disabled]
>Uncore & QPI Feature---------------------------------[Press Enter]
QPI Clock Ratio -------------------------------------------[X36]
Uncore Clock Ratio--------------------------------------[X16]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[200]
>Advanced Clock Control-----------------------------[Press Enter]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[200]
PCI Express Frequency(MHz)-------------------------[100]
CPU Clock Drive-----------------------------------------[700mV]
PCI Express Clock Drive----------------------------[700mV]
CPU Clock Skew-----------------------------------------[0ps]
IOH Clock Skew------------------------------------------[0ps]
Performance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)--------------------[Profile1]
System Memory Multiplier(SPD)--------------------[10.0]
>Advanced DRAM Features-------------------------[Press Enter]
Peformance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)------------------[Profile1]
System Memory Multiplier(SPD)------------------[10.0]
DRAM Timing Selectable (SPD)---------------------[Expert]
Channel Interleaving-----------------------------------[6]
Rank Interleaving----------------------------------------[4]
Channel A 6-9-9-24-40-6-6-10-20-7-110-6-30-2-Auto-57
Channel B 6-9-9-24-40-6-6-10-20-7-110-6-30-2 Auto-59
Channel C 6-9-9-24-40-6-6-10-20-7-110-6-30-2-Auto-61
>Advanced Voltage Control
Load-Line Calibration------------------------------------[Level 2]
CPU Vcore -------------------------------------------------[1.05000v]
QPI/VTT Voltage------------------------------------------[1.255v]
CPU PLL-----------------------------------------------------[1.800v]
PCIE----------------------------------------------------------[1.500v]
QPI PLL-------------------------------------------------------[1.100v]
IOH Core-----------------------------------------------------[1.100v]
ICH I/O-------------------------------------------------------[1.500v]
ICH Core-----------------------------------------------------[1.100v]
DRAM Voltage----------------------------------------------[1.660v]
DRAM Termination---------------------------------------[Auto]
Ch-A Data Vref--------------------------------------------[Auto]
Ch-B Data Vref--------------------------------------------[Auto]
Ch-C Data Vref---------------------------------------------[Auto]
Ch-A Address Vref--------------------------------------[Auto]
Ch-B Address Vref---------------------------------------[Auto]
Ch-C Address Vref-----------------------------------------[Auto]

with this kit runs 210/2100, but Cl8
http://j.imagehost.org/0982/210-3.jpg

and BIOS setting

>Advanced CPU Feature------------------------------[Press Enter]
CPU Clock Ratio --------------------------------------16X
Intel(R) Turbo Boost Tech.---------------------------- [Disabled]
CPU Cores Enabled------------------------------------- [All]
CPU Multi-Threading---------------------------------- [Disabled]
CPU Enhanced Halt (C1E)-----------------------------[Disabled]
C3/C6/C7 State Support------------------------------ [Disabled]
CPU Thermal Monitor--------------------------------- [Disabled]
CPU EIST Function--------------------------------------[Disabled]
Bi-Directional PROCHOT------------------------------ [Disabled]
Virtualization Technology----------------------------- [Disabled]
QPI Clock Ratio------------------------------------------X36
>Uncore & QPI Feature---------------------------------[Press Enter]
QPI Clock Ratio -------------------------------------------[X36]
Uncore Clock Ratio--------------------------------------[X15]
Isochronous Support-----------------------------------[Enabled]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[210]
>Advanced Clock Control-----------------------------[Press Enter]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[210]
PCI Express Frequency(MHz)-------------------------[100]
CPU Clock Drive-----------------------------------------[700mV]
PCI Express Clock Drive----------------------------[700mV]
CPU Clock Skew-----------------------------------------[0ps]
IOH Clock Skew------------------------------------------[0ps]
Performance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)--------------------[Profile1]
System Memory Multiplier(SPD)--------------------[10.0]
>Advanced DRAM Features-------------------------[Press Enter]
Peformance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)------------------[Profile1]
System Memory Multiplier(SPD)------------------[10.0]
DRAM Timing Selectable (SPD)---------------------[Expert]
Channel Interleaving-----------------------------------[6]
Rank Interleaving----------------------------------------[4]
Channel A 8-10-9-24-40-6-6-10-20-7-110-6-30-2-Auto-59
Channel B 8-10-9-24-40-6-6-10-20-7-110-6-30-2 Auto-61
Channel C 8-10-9-24-40-6-6-10-20-7-110-6-30-2-Auto-63
>Advanced Voltage Control
Load-Line Calibration------------------------------------[Level 2]
CPU Vcore -------------------------------------------------[1.10000v]
QPI/VTT Voltage------------------------------------------[1.255v]
CPU PLL-----------------------------------------------------[1.800v]
PCIE----------------------------------------------------------[1.500v]
QPI PLL-------------------------------------------------------[1.100v]
IOH Core-----------------------------------------------------[1.100v]
ICH I/O-------------------------------------------------------[1.500v]
ICH Core-----------------------------------------------------[1.100v]
DRAM Voltage----------------------------------------------[1.660v]
DRAM Termination---------------------------------------[Auto]
Ch-A Data Vref--------------------------------------------[Auto]
Ch-B Data Vref--------------------------------------------[Auto]
Ch-C Data Vref---------------------------------------------[Auto]
Ch-A Address Vref--------------------------------------[Auto]
Ch-B Address Vref---------------------------------------[Auto]
Ch-C Address Vref-----------------------------------------[Auto]

Tested with crap bloomfield stock fan, if you want oc multiplier just
try raise vcore and multiplier, i think you know what i mean.
would like to know if you have problem with those settings, cheer!:up:

HiCookie
04-29-2010, 08:57 AM
In-Fluence

Thanks for those hicookie - might just give these settings a whirl when I get back to work and see how I fare :up:
04-29-2010, 09:49 AM
radaja

Quote:

Originally Posted by hicookie

looks that chip very strong, also curios what cooling you are using for 920

hicookie,thanks.very nice ram you have
water,rad w/res/block(EK supreme LT)/pump and the help of AC

In-Fluence,thanks.hope your goes far too.
04-29-2010, 04:36 PM
hicookie

Quote:

Originally Posted by radaja

hicookie,thanks.very nice ram you have
water,rad w/res/block(EK supreme LT)/pump and the help of AC

In-Fluence,thanks.hope your goes far too.

:D hehe, nice a 24/7 cooling system, i need to clean space if i gonna
to use chiller water, serious nice setting you there and with your equipment:up:
04-29-2010, 08:03 PM
hicookie

ADATA 1866+ 200-2000 Use 24/7 on GIGABYTE X58 980X

update setting with adata 1866+ (8,8,8,24)
This kit i got its elpida hyper, but sorted bad from 2200+ modle
so you could run this 200-2000 with CL7-7-7 but atlest needs 1.72~ 1.76v
for Suepr pi 32m. so back to 24/7, i lock vdimm to be 1.66v
and using xmp you could oc to 200MHz CL8. by the way i change cooler to
Thermaltake frio, give me 4.2GHz stable

BIOS setting

>Advanced CPU Feature------------------------------[Press Enter]
CPU Clock Ratio --------------------------------------21X
Intel(R) Turbo Boost Tech.---------------------------- [Disabled]
CPU Cores Enabled------------------------------------- [All]
CPU Multi-Threading---------------------------------- [Disabled]
CPU Enhanced Halt (C1E)-----------------------------[Disabled]
C3/C6/C7 State Support------------------------------ [Disabled]
CPU Thermal Monitor--------------------------------- [Disabled]
CPU EIST Function--------------------------------------[Disabled]
Bi-Directional PROCHOT------------------------------ [Disabled]
Virtualization Technology----------------------------- [Disabled]
>Uncore & QPI Feature---------------------------------[Press Enter]
QPI Clock Ratio -------------------------------------------[X36]
Uncore Clock Ratio--------------------------------------[X16]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[200]
>Advanced Clock Control-----------------------------[Press Enter]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[200]
PCI Express Frequency(MHz)-------------------------[100]
CPU Clock Drive-----------------------------------------[700mV]
PCI Express Clock Drive----------------------------[700mV]
CPU Clock Skew-----------------------------------------[0ps]
IOH Clock Skew------------------------------------------[0ps]
Performance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)--------------------[Profile1]
System Memory Multiplier(SPD)--------------------[10.0]
>Advanced DRAM Features-------------------------[Press Enter]
Peformance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)------------------[Profile1]
System Memory Multiplier(SPD)------------------[10.0]
DRAM Timing Selectable (SPD)---------------------[Auto]
Channel Interleaving-----------------------------------[Auto]
Rank Interleaving----------------------------------------[Auto]
>Advanced Voltage Control
Load-Line Calibration------------------------------------[Level 2]
CPU Vcore -------------------------------------------------[1.33750v]
QPI/VTT Voltage------------------------------------------[1.255v]
CPU PLL-----------------------------------------------------[1.800v]
PCIE----------------------------------------------------------[1.500v]
QPI PLL-------------------------------------------------------[1.100v]
IOH Core-----------------------------------------------------[1.100v]
ICH I/O-------------------------------------------------------[1.500v]
ICH Core-----------------------------------------------------[1.100v]
DRAM Voltage----------------------------------------------[1.660v]
DRAM Termination---------------------------------------[Auto]
Ch-A Data Vref--------------------------------------------[Auto]
Ch-B Data Vref--------------------------------------------[Auto]
Ch-C Data Vref---------------------------------------------[Auto]
Ch-A Address Vref--------------------------------------[Auto]
Ch-B Address Vref---------------------------------------[Auto]
Ch-C Address Vref-----------------------------------------[Auto]

here is prime
http://j.imagehost.org/0668/ADATA1866.jpg

HiCookie
04-30-2010, 04:09 AM
wolvers69

Nice clock radaja. :clap: I'd be well pleased with that. :up:
04-30-2010, 01:31 PM
cowpuppy

1 Attachment(s)

Went back to 4.2Ghz w/ht on. Did some tweaking of the voltages. I don't think I can run 4.4w/ht on unless I switch to water.

still 4.2ghz is fast it's just not a cherry cpu and any1 getting 4.2 should be really happy they at least didn't get a dud.
05-07-2010, 04:18 AM
hicookie

Gigabyte X58 series with Gskill F3-18400CL8T-6GBPIS BIOS setting

Intel 980X
Intel 980X stock Fan
X58A-UD3R
Gskill F3-18400CL8T-6GBPIS (DDR3-2300C8)

http://j.imagehost.org/0956/2300-pending.png

http://j.imagehost.org/0825/2300-end.png

>Advanced CPU Feature------------------------------[Press Enter]
CPU Clock Ratio --------------------------------------21X (4.03GHz)
Intel(R) Turbo Boost Tech.---------------------------- [Disabled]
CPU Cores Enabled------------------------------------- [All]
CPU Multi-Threading---------------------------------- [Endabled]
CPU Enhanced Halt (C1E)-----------------------------[Disabled]
C3/C6/C7 State Support------------------------------ [Disabled]
CPU Thermal Monitor--------------------------------- [Disabled]
CPU EIST Function--------------------------------------[Disabled]
Bi-Directional PROCHOT------------------------------ [Disabled]
Virtualization Technology----------------------------- [Disabled]
QPI Clock Ratio------------------------------------------X36 (6.91GHz)
>Uncore & QPI Feature---------------------------------[Press Enter]
QPI Clock Ratio -------------------------------------------[X36]
Uncore Clock Ratio--------------------------------------[X19] (3.648GHz)
Isochronous Support-----------------------------------[Enabled]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[192]
>Advanced Clock Control-----------------------------[Press Enter]
Base Clock(BCLK) Control-----------------------------[Enabled]
BCLK Frequency(MHz)---------------------------------[192]
PCI Express Frequency(MHz)-------------------------[100]
CPU Clock Drive-----------------------------------------[800mV]
PCI Express Clock Drive----------------------------[900mV]
CPU Clock Skew-----------------------------------------[0ps]
IOH Clock Skew------------------------------------------[0ps]
Performance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)--------------------[Profile1]
System Memory Multiplier(SPD)--------------------[12.0]
>Advanced DRAM Features-------------------------[Press Enter]
Peformance Enhance---------------------------------[Turbo]
Extreme Memory Profile(X.M.P)------------------[Profile1]
System Memory Multiplier(SPD)------------------[12.0]
DRAM Timing Selectable (SPD)---------------------[Quick]
Channel Interleaving-----------------------------------[6]
Rank Interleaving----------------------------------------[4]
Channel A 8-11-8-28-auto-auto-auto-auto-auto-8-auto-auto-auto-auto-Auto-Auto
Channel B 8-11-8-28-auto-auto-auto-auto-auto-8-auto-auto-auto-auto-Auto-Auto
Channel C 8-11-8-28-auto-auto-auto-auto-auto-8-auto-auto-auto-auto-Auto-Auto
>Advanced Voltage Control
Load-Line Calibration------------------------------------[Level 2]
CPU Vcore -------------------------------------------------[1.27500v]
QPI/VTT Voltage------------------------------------------[1.415v]
CPU PLL-----------------------------------------------------[Auto]
PCIE----------------------------------------------------------[Auto]
QPI PLL-------------------------------------------------------[Auto]
IOH Core-----------------------------------------------------[Auto]
ICH I/O-------------------------------------------------------[Auto]
ICH Core-----------------------------------------------------[Auto]
DRAM Voltage----------------------------------------------[1.660v]
DRAM Termination---------------------------------------[Auto]
Ch-A Data Vref--------------------------------------------[Auto]
Ch-B Data Vref--------------------------------------------[Auto]
Ch-C Data Vref---------------------------------------------[Auto]
Ch-A Address Vref--------------------------------------[Auto]
Ch-B Address Vref---------------------------------------[Auto]
Ch-C Address Vref-----------------------------------------[Auto]
05-07-2010, 05:00 PM
l0ud_sil3nc3

here are some low voltage oc's that are IBT stable, 25 passes

on a very very nice W3540:clap:

thanks again steve

http://i43.tinypic.com/9v9ids.png

this is cooled with a Venomous X with two Scythe SFF21F 1600 rpm's in push/pull. I can't wait to get it under water.
05-08-2010, 04:05 PM
St Devious

does this work with e5620 32nm quad core xeon cpu ?
05-10-2010, 12:30 PM
cc_zero

I got my UD3R and i7 920 D0 a cupple of days ago. The batch (3936B217) seems to be a rather moderate one, so I can't go very high at the moment. I already need some 1.35v for 4GHz and I get temperatures in the high 80s at that level. I use a Noctua NH-U12P SE2 with the two stock fans. They're probably a little slow with their 1200 RPM as are the case fans with two 120mm@1000 RPM pulling in and one of them pushing out.
Anyway, here is the current OC:
http://frakrate.com/share/oc1.png

I'm currently pondering two things. 1) Selling the 920 and getting a new one 2) Switching to water.
Well, let's see what the future brings :D
05-11-2010, 06:07 PM
systemviper

Quote:

Originally Posted by l0ud_sil3nc3

here are some low voltage oc's that are IBT stable, 25 passes

on a very very nice W3540:clap:

thanks again steve

http://i43.tinypic.com/9v9ids.png

this is cooled with a Venomous X with two Scythe SFF21F 1600 rpm's in push/pull. I can't wait to get it under water.

Sweet, i am glad that you are happy and i can't wait to see it under water....:up:

i'm waiting to see some of that x3380 action
05-12-2010, 08:45 AM
PatRaceTin

help my friend decide

X58A-UD3R or X58A-UD7 ????
05-12-2010, 02:52 PM
St Devious

Quote:

Originally Posted by St Devious

does this work with e5620 32nm quad core xeon cpu ?

help here
05-13-2010, 04:36 AM
wolvers69

I took the blue Gigabyte plate off of the NB heat sink last night. It was hot, as it had been running without a fan on for a while, so the adhesive tape was soft and it peeled off quite easily. Temps are now a nice 48C which is 8-10C cooler than it was before.

Also, got the vcore down nice and low now.

http://img203.imageshack.us/img203/2619/i738118v.jpg

Popped in a second 5850 as well. :up:
05-13-2010, 06:20 AM
wolf2009

Quote:

Originally Posted by wolvers69

I took the blue Gigabyte plate off of the NB heat sink last night. It was hot, as it had been running without a fan on for a while, so the adhesive tape was soft and it peeled off quite easily. Temps are now a nice 48C which is 8-10C cooler than it was before.

http://img203.imageshack.us/img203/2619/i738118v.jpg

are you talking about this thing here

http://i44.tinypic.com/okymc7.jpg

Did you just pull it off ? Does that void warranty ?
05-13-2010, 07:22 AM
wolvers69

Yes, yes and probably. Like I said, I did it when it was hot but it still took a bit of force to pull off.

Show 100 post(s) from this thread on one page