EVGA Classified + 920 DO - goes 5GHz+ Wprime 1024!!!

is this normal?

now i´ve tried 20x220 VTT 1,35V VDimm 1,65V and VCore 1,4625 @ 1,38 Load. after this the system will not boot at windows and if i go into the bios i cannot change anything because the system freezes in the bios. after i made a cmosclear it runs well. what was the fault?

Sounds like your CPU does not like the 20x multiplier.

Quote:

---

Originally Posted by raju

Sounds like your CPU does not like the 20x multiplier.

---

ok but the same was at the 2 other cpus before. Is it possible that the MoBo is defective? but if it is defective it would´nt work after cmos reset. ot what do you think? i´ve tested the 21x multi and ther was the same.

Quote:

---

Originally Posted by RNeon

ok but the same was at the 2 other cpus before. Is it possible that the MoBo is defective? but if it is defective it would´nt work after cmos reset. ot what do you think? i´ve tested the 21x multi and ther was the same.

---

21x was the same how? Not stable? At what BCLK?

If you're having real probelms I suggest you head over to th EVGA support forum and start debugging slowly. This section of the forum is really for xtreme benching results more than 24/7 stuff and issues etc.

later
raja

Quote:

---

Originally Posted by raju

21x was the same how? Not stable? At what BCLK?

If you're having real probelms I suggest you head over to th EVGA support forum and start debugging slowly. This section of the forum is really for xtreme benching results more than 24/7 stuff and issues etc.

later
raja

---

not a big problem maybe . my question was only if it happened to you when you do false settings that if you´re going to bios to change the settings and it freezes and you have to make a cmos clear to work the system again.

Quote:

---

Originally Posted by RNeon

not a big problem maybe . my question was only if it happened to you when you do false settings that if you´re going to bios to change the settings and it freezes and you have to make a cmos clear to work the system again.

---

RNeon - Let us keep on the subject of Raja and his 5ghz Prime 1024.;) If you want to troubleshoot your problem, please start another thread in the Intel section.
thank you :)

Back on the cascade today. Thought I'd see if I could scale Wprime any further. Managed a 241BCLK pass for now, not too shabby at all for a 920 under cascade;

http://img17.imageshack.us/img17/5496/wprime150152.jpg

meh not too shabby ;) possible to get a e-leet shot with voltages?

iam just shocked about 240Mhz BCLK "stable"..? thats just insane...!

raju: have you ever experienced that the system slows down/stutters when you change settings in eleet?

Hi Raju,

what PCIe clock did you use for that?
And did you also raise the PCIe Voltage?

Quote:

---

Originally Posted by dpa

iam just shocked about 240Mhz BCLK "stable"..? thats just insane...!

raju: have you ever experienced that the system slows down/stutters when you change settings in eleet?

---

No I have not personally. Which version of E-LEET are you on?

241 bclk wPrime 1024M stable on cascade ! :eek2: Now we're talking :D

Quote:

---

Originally Posted by raju

No I have not personally. Which version of E-LEET are you on?

---

latest version.. Iam at 215 max with Xeon W3520, even under vapo ls its max.. right now.. I really hate this board.. anything over 215 just wont run. either the rig freezes, or it "stutters" until I have to turn it off.

I think I have tried almost every setting possible (ofcourse I havent, but you get the picture). vtt, qpi, vdimm, pciex.. etc etc.. nothing helps. changed psu.. tried one stick of ram.. tried two different vgas... iam getting tiiiiired.

*puh*.. got my frustration out...

have you set CPU impedance and QPi Comp both to less?

also run PCI/e at 110.

If that does not work, I think it may be the limit of your CPu unless you're sure it can do more in another board.


later.
Raja

Quote:

---

Originally Posted by dpa

latest version.. Iam at 215 max with Xeon W3520, even under vapo ls its max.. right now.. I really hate this board.. anything over 215 just wont run. either the rig freezes, or it "stutters" until I have to turn it off.

I think I have tried almost every setting possible (ofcourse I havent, but you get the picture). vtt, qpi, vdimm, pciex.. etc etc.. nothing helps. changed psu.. tried one stick of ram.. tried two different vgas... iam getting tiiiiired.

*puh*.. got my frustration out...

---

def not the board man, I would make my own thread with settings you have tested and get help that way :up:

Exellent ! great clocking 241 bclk :up:

:clap:another Sham wonder board :D

Quote:

---

Originally Posted by raju

Back on the cascade today. Thought I'd see if I could scale Wprime any further. Managed a 241BCLK pass for now, not too shabby at all for a 920 under cascade;

---

Nice, are you're gaming on this rig lol. Gotta love that :clap:

Omg nice result and this bclk WOW :D

Quote:

---

Originally Posted by G H Z

Nice, are you're gaming on this rig lol. Gotta love that :clap:

---

lol, atm this is gaming as far as I'm concerned. We'll have the board under LN2 again shortly with this CPU an see how much further it will go..

man those are awesome runs,

i'm stuck at 234bclk, care to share vtt and vioh and vioh(i/o)

maybe its my limit i'm only using water :D

Water is probably what is limiting you. I don't change VIOH IO. IOH you can leave at stock for 2d, only 3d sometiems benefits from a hike. VTT is chip dependant and it seems no two are the same for what they need at a given clock or temp.

looking forward to more LN2 testing.. 250BCLK would be awesome!

I saw you mentioned a W3540, planning to get one soon? They seem great, hoping to try one myself soon.

W3540 is on order. They seem pretty good, but I'll be surprised if I manage to chance upon one as good as this 920 is all round.

regards
Raja

Hello,

are you all putting a fan on the NB Heatpipe? and on the vreg cooler? and how we can read the NB Temp in windows?

RNeon buddy please make a topic in Intel section or have a look here for "general' info/tips etc for the Classified.