Haruhi - Naekuh's New Queen

Printable View

Show 100 post(s) from this thread on one page

03-15-2009, 06:17 PM
SNiiPE_DoGG

well I cant say I didnt warn ya :D It's ok I am a youngling as some would say so I guess I can see why you might not have believed me :rofl:
03-15-2009, 06:49 PM
CyberDruid

Late to the party. Hard to find anything to harrass you about...I'll keep looking.

Got one.

How come the chiller isn't chrome plated hunh?
03-15-2009, 08:39 PM
skinnee

Quote:

Originally Posted by gillbot

I'm just waiting for his soapbox to get just high enough, then i'll snip at it with the cutters i've got concealed. :rofl:

Well good, cuz I smuggled another pair of diagnals in just in case you forgot a pair. :D

:ROTF:
03-16-2009, 07:42 AM
gillbot

Quote:

Originally Posted by skinnee

Well good, cuz I smuggled another pair of diagnals in just in case you forgot a pair. :D

:ROTF:

Well then he really is in for it because I had an extra pair for you too! :rofl:

We'll both look like edward scissorhands swiping at his soapbox. :up:
03-16-2009, 11:43 AM
NaeKuh

im in line for stepup to the classified.
03-16-2009, 01:09 PM
zlojack

Quote:

Originally Posted by NaeKuh

im in line for stepup to the classified.

What position?
03-16-2009, 03:40 PM
NaeKuh

Quote:

Originally Posted by zlojack

What position?

#185 :rofl:

so i think im gonna have to wait a while.
03-16-2009, 03:47 PM
SiGfever

Quote:

Originally Posted by CyberDruid

Late to the party. Hard to find anything to harrass you about...I'll keep looking.

Got one.

How come the chiller isn't chrome plated hunh?

I would have guessed, nickel. :ROTF: :D
03-16-2009, 06:03 PM
NaeKuh

aHHHHHHHHHHH i just lost a stick of DDR3.

Maybe thats why my crapsus didnt see it, and its not actually crapsus.

But after using the P6T besides that ONE ANNOYING memory issue, im starting to think its a better board then this vanilla eVGA.
(hence why i stepped up).

Anyhow some pictures for you guys:

I tried to make my layout simple so i can remove the board within 30min. Here i pulled my board out ONE MORE Fin time to inspect the pins to see if it was bent or not.

http://i125.photobucket.com/albums/p...a/IMG_1317.jpg

Side view:
http://i125.photobucket.com/albums/p...a/IMG_1318.jpg

James you asked me if i was busy:

Wheres Waldo!
http://i125.photobucket.com/albums/p...a/IMG_1319.jpg

You tell me, im still cleaning that wiring up.

2 PSU's = Nightmare in wires...
03-16-2009, 06:07 PM
l33t p1mp

Unless its an HX1000. :D
03-16-2009, 06:09 PM
NaeKuh

Quote:

Originally Posted by l33t p1mp

Unless its an HX1000. :D

PCnC 1KW SR (that long black one on the floor you see) > almost every 1kw PSU out there. :P

I love modular, which is what my neo is, but i love that PCnC even more then a modular PSU.
03-16-2009, 06:40 PM
shazza

NaeKuh ... I continue to be so impressed with your work. I never thought I'd see you sleeving so much!

Sorry that EVGA 58 is not working out for you, but I'm really looking forward to your take on the Classified.
03-16-2009, 07:43 PM
NaeKuh

Actually shazza i lost a DDR3, so i think that was the culprit.

And thanks for your kind words.

Oh i got a bugged sensor or my cpu waterloop is somehow breaking the laws of physics on the cpu temp...

http://i125.photobucket.com/albums/p...orla/Wierd.jpg

Makes me wonder if i really need to watercool this board or the classified...
03-16-2009, 10:22 PM
Metric

How does the temperatures compare to Core Temp or Real Temp? I'm guessing a stuck sensor.

Sidenote, still need to know your answer from my previous PM concerning the filter (filter or filter + shroud).
Bei also approves of my Classified block design :) Just need the correct dimensions from you or from EVGA (if they ever decide to answer my PM...)
03-17-2009, 05:18 PM
NaeKuh

Quote:

Originally Posted by Metric

How does the temperatures compare to Core Temp or Real Temp? I'm guessing a stuck sensor.

Sidenote, still need to know your answer from my previous PM concerning the filter (filter or filter + shroud).
Bei also approves of my Classified block design :) Just need the correct dimensions from you or from EVGA (if they ever decide to answer my PM...)

PM Sent.

I ordered some G.Skill PI ram.

If i like them, i'll probably get another 6gb and go 12gb on the setup.

If the spreaders are average, i'll probably take them off, since the ram was so cheap, and drop in koolance's Ram cooler. :T

Still debating.... id like to keep 75% of my heat in the top pedistool and leave the bottom cool for the board and GPU backside ram.
03-17-2009, 06:31 PM
gillbot

Quote:

Originally Posted by NaeKuh

But after using the P6T besides that ONE ANNOYING memory issue, im starting to think its a better board then this vanilla eVGA.
(hence why i stepped up).

Hmm, I'll let this one slide. Soap box isn't high enough yet......
03-17-2009, 06:43 PM
skinnee

Quote:

Originally Posted by gillbot

Hmm, I'll let this one slide. Soap box isn't high enough yet......

Waiting a half step behind you. :D
03-17-2009, 07:35 PM
headala

Quote:

Originally Posted by NaeKuh

PM Sent.

I ordered some G.Skill PI ram.

If i like them, i'll probably get another 6gb and go 12gb on the setup.

If the spreaders are average, i'll probably take them off, since the ram was so cheap, and drop in koolance's Ram cooler. :T

Still debating.... id like to keep 75% of my heat in the top pedistool and leave the bottom cool for the board and GPU backside ram.

Careful, NK, I think that ram cooler is Alu. :(
03-17-2009, 09:10 PM
NaeKuh

Quote:

Originally Posted by headala

Careful, NK, I think that ram cooler is Alu. :(

if i do run it, most likely its own loop with a koolance alu rad.
03-18-2009, 11:31 AM
headala

Quote:

Originally Posted by NaeKuh

if i do run it, most likely its own loop with a koolance alu rad.

Nice, a ram-only loop! I would expect no less than that from you!

Haha, I just realized you may be the only person to ever come up with a good use for their Alu rads! :rofl:
03-18-2009, 12:58 PM
NaeKuh

I got my gskill PI ram.

I got 6gb back in both bios and windows.
I might pick up another 6gb and max out my ram sector with 12gb, why not its haruhi right? :rofl:

Man stupid corsairs, now i need to rma one stick.

My line for the classified is now 183.
I think people are canceling and not stepping up because the board has still been OOS.
03-18-2009, 01:16 PM
ILikeCosmosS

good look doing your wire management, since you are using dual psu's do you have any idea where i can mount my modu 82+ in the back of a cosmos s?

looking good naekuh
03-18-2009, 01:31 PM
NaeKuh

Quote:

Originally Posted by ILikeCosmosS

good look doing your wire management, since you are using dual psu's do you have any idea where i can mount my modu 82+ in the back of a cosmos s?

you mean good luck?

Thats what i told myself each time i look at that mess. Im not going to do any hardcore management until after i get my classified.

But yeah, i may throw in a gi joe figure and have you guys really look for waldo in that mess. :rofl:

That would be interesting huh?

As for placement help, i need a picture, pm me it, and i'll see if i can improvise something to help ya out.

Ouch today is a hot day, and my vregs are in the 60ish. Board is still cool at 28-30ish.

mmm... i may need a waterblock on the mosfet only on the classified.
03-18-2009, 01:46 PM
zlojack

Quote:

Originally Posted by NaeKuh

you mean good luck?

Thats what i told myself each time i look at that mess. Im not going to do any hardcore management until after i get my classified.

But yeah, i may throw in a gi joe figure and have you guys really look for waldo in that mess. :rofl:

That would be interesting huh?

As for placement help, i need a picture, pm me it, and i'll see if i can improvise something to help ya out.

Ouch today is a hot day, and my vregs are in the 60ish. Board is still cool at 28-30ish.

mmm... i may need a waterblock on the mosfet only on the classified.

I'd wait until you get the board.

The mosfet is supposed to be completely different. I agree that it gets pretty warm on the standard X58
03-18-2009, 02:13 PM
ILikeCosmosS

Quote:

Originally Posted by NaeKuh

you mean good luck?

Thats what i told myself each time i look at that mess. Im not going to do any hardcore management until after i get my classified.

But yeah, i may throw in a gi joe figure and have you guys really look for waldo in that mess. :rofl:

That would be interesting huh?

As for placement help, i need a picture, pm me it, and i'll see if i can improvise something to help ya out.

Ouch today is a hot day, and my vregs are in the 60ish. Board is still cool at 28-30ish.

mmm... i may need a waterblock on the mosfet only on the classified.

i want to play where's waldo

as for the placement i am not building yet until 4890's come and x58 revision rolls out

where the psu bay is at the bottom i was thinking of attaching both of my psu's there (1 internal 1 external) and just hanging there
i could use the 120mm fan holes to mount it as well and use the mesh on the side to mount as well, i don't have much to choose from i want to make it hidden as possible

when are you getting your classfied?

Show 100 post(s) from this thread on one page